how to lose 50lbs in 2 days - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68w/sbc406 · 05-01-2005, 05:00 AM

and its 2 days cause i am too lazy to bust mu butt to get it done in one. the cast heads weigh 55lbs and the aluminum ones weigh 25. i will finish it all up tomorrow. as it sits all the valves are adjusted. so on with the intake and headers and we are done and then

71-longbed · 05-01-2005, 07:02 AM

thats a mean diet ... what are the specs on the heads

68w/sbc406 · 05-01-2005, 12:52 PM

they are ZZ4 heads 58cc, 194 intake http://67-72chevytrucks.com/vboard/s....php3?t=140933

tmcgrawlookalike · 05-01-2005, 01:05 PM

did you decide to change cam also?

71swb4x4 · 05-01-2005, 01:06 PM

Looks cool.
That's some funny math you are doing

68w/sbc406 · 05-01-2005, 01:09 PM

Quote:

Originally Posted by tmcgrawlookalike

did you decide to change cam also?

naa cam is already lumpy

Quote:

Originally Posted by 71swb4x4

Looks cool.
That's some funny math you are doing

yeah i really am just changing the heads for weight reduction

tmcgrawlookalike · 05-01-2005, 01:15 PM

was remembering this from last week or so and i knew you were possibly considering a cam swap.bumping up that compression may in turn make your cam sound a little more nasty

68w/sbc406 · 05-01-2005, 01:27 PM

yeah i had a chance at a cheap roller cam but it wasnt any bigger than what i have and i would also have had to bought lifters and the keepers. i used a compresion claculator that some one linked to me and it was 9.3 and is now 10.4. i am also going to put a 1" carb spacer on so the heat wont transfer to the carb (its also supposed to help with torque) the next thing that i will have to replace will probably have to be the rear end

72MARIO · 05-01-2005, 02:24 PM

Thoes heads look sweet.

How do you like the manual brakes. I just picked up my new master Cyl. Kinda hope I don't regret going manual. I have to shoot it with torch red this week.

68w/sbc406 · 05-01-2005, 02:28 PM

manual 4 wheel drum.......my legs are buff. i have all the disc stuff waiting to go on.

68w/sbc406 · 05-01-2005, 10:18 PM

well today wasnt very productive. i had to hit up 2 part stores to find the part i needed to put my temp probe in the head. but i got my headers bolted on, temp probe in, plugs in intake on, dizzy in, carb spacer on, linkage and kick down cable on. now i moved on to the PS pump, it leaks and i bought a alan grove bracket for it so it wont use any head bolts, but i need to drill and tap two holes on the bolck and put the gasket kit on the pump. then hopefully it can go back together.

*Randy70C-10* · 05-01-2005, 10:32 PM

Nice heads!!

68w/sbc406 · 05-01-2005, 10:39 PM

thank ya

R@nger · 05-02-2005, 03:21 AM

Very nice.

Good lookin engine compartment.

mr402 · 05-02-2005, 10:51 PM

Whooo Hoooo! Looking nice. Can't wait to see it at our next get together.

68w/sbc406 · 05-03-2005, 12:29 AM

just more gizmos and gadgets. thanks guy

68w/sbc406 · 05-04-2005, 01:11 AM

well this PS pump is kicking my @$$ i bought aftermarket brackets for it and a seal kit since it leaks like a pig. well it was fun puting the seal kit in (not that hard) but then i put it back together and realized i needed to drill a hole in the case to get access to another threaded hole on the pump inside, well with the new "O" ring the pump did not want to come back apart. once i got it all back apart got the hole drilled and put today i started messing around with the brackets and tapping the block so it could be bolted on.then realized that my valve covers BOTH have a big hole (like where a cap would go but they arent threaded) and a PCV port. so now i have to figure out what to run in all the holes. one will be a PCV and the two big holes will be both breathers probably, but what about the other PCV size hole??? also had to go the the auto store twice to get the right size belt for the PS. and tomorrow i get to go to the dealership to find the gromets and stupid stuff. at this point i am frustrated with all the little issues and you can tell by the way the shop looks.

68w/sbc406 · 05-04-2005, 01:12 AM

and more

68plus4sub · 05-04-2005, 01:38 AM

YEAH man!! I like those heads as well; very cool. I think maybe I'll take a closer look sometime.....like maybe at your house.......like maybe about 2 in the morning....like maybe with a REALLY quiet air gun!!!!!!!

I should get a thread going like this, it's cool. As little as I work on the burb, the thread would be gone in a matter of days!!

68w/sbc406 · 05-04-2005, 09:01 AM

we wont have the same valve covers anymore, these are center bolt

silvertonguedevil · 05-04-2005, 09:41 AM

Nice work! Can't wait to check out the difference!

68w/sbc406 · 05-04-2005, 07:15 PM

nice of you to join us, where ya been?

silvertonguedevil · 05-04-2005, 08:16 PM

Quote:

Originally Posted by 68w/sbc406

nice of you to join us, where ya been?

I'm not sure

joelboxt · 05-04-2005, 07:35 PM

hey 68w/sbc406, you should post some more pictures of the complete engine with the intake on it. so we can see how nice it looks.

joel

72MARIO · 05-04-2005, 08:09 PM

Have considered Copper collector gaskets ? I have them in my 84 and they are great. No blow out's.

05-01-2005, 05:00 AM	#1
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	how to lose 50lbs in 2 days and its 2 days cause i am too lazy to bust mu butt to get it done in one. the cast heads weigh 55lbs and the aluminum ones weigh 25. i will finish it all up tomorrow. as it sits all the valves are adjusted. so on with the intake and headers and we are done and then Attached Images __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler Last edited by 68w/sbc406; 05-01-2005 at 05:00 AM.

05-01-2005, 07:02 AM	#2
71-longbed Its Magically Delicious Join Date: Jan 2003 Location: oregon Posts: 2,398	thats a mean diet ... what are the specs on the heads __________________ 71 C10 LWB 350sbc -TH350 12 bolt 3.42 Posi Of all my favorite things to do, The utmost is to have a brew. My love grows for my foamy friend, with each thirst-quenching elbow bend. Beer so frosty, smooth, and cold it's paradise pure liquid gold. Yes beer means many things to me that's all for now cus I gotta pee.

05-01-2005, 12:52 PM	#3
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	they are ZZ4 heads 58cc, 194 intake http://67-72chevytrucks.com/vboard/s....php3?t=140933 __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

05-01-2005, 01:06 PM	#5
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Looks cool. That's some funny math you are doing __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

05-01-2005, 01:27 PM	#8
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	yeah i had a chance at a cheap roller cam but it wasnt any bigger than what i have and i would also have had to bought lifters and the keepers. i used a compresion claculator that some one linked to me and it was 9.3 and is now 10.4. i am also going to put a 1" carb spacer on so the heat wont transfer to the carb (its also supposed to help with torque) the next thing that i will have to replace will probably have to be the rear end __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

05-01-2005, 01:05 PM	#4
tmcgrawlookalike Registered User Join Date: Jun 2004 Location: warr acres,oklahoma Posts: 650	did you decide to change cam also?

05-01-2005, 01:15 PM	#7
tmcgrawlookalike Registered User Join Date: Jun 2004 Location: warr acres,oklahoma Posts: 650	was remembering this from last week or so and i knew you were possibly considering a cam swap.bumping up that compression may in turn make your cam sound a little more nasty

05-01-2005, 02:24 PM	#9
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	Thoes heads look sweet. How do you like the manual brakes. I just picked up my new master Cyl. Kinda hope I don't regret going manual. I have to shoot it with torch red this week. __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

05-01-2005, 02:28 PM	#10
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	manual 4 wheel drum.......my legs are buff. i have all the disc stuff waiting to go on. __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

05-01-2005, 10:18 PM	#11
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	well today wasnt very productive. i had to hit up 2 part stores to find the part i needed to put my temp probe in the head. but i got my headers bolted on, temp probe in, plugs in intake on, dizzy in, carb spacer on, linkage and kick down cable on. now i moved on to the PS pump, it leaks and i bought a alan grove bracket for it so it wont use any head bolts, but i need to drill and tap two holes on the bolck and put the gasket kit on the pump. then hopefully it can go back together. __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

05-01-2005, 10:32 PM	#12
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Nice heads!!

05-01-2005, 10:39 PM	#13
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	thank ya __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

05-02-2005, 03:21 AM	#14
R@nger Psalm 23 Join Date: Apr 2005 Location: Utah Posts: 360	Very nice. Good lookin engine compartment. __________________ 71 GMC Fleetside C15(cab), 3/4 ton, 350, Holley Street Avenger 570cfm carb, TH350 trans, Leaf-springs, 2WD. "Peter are you sleeping on the job? No I have a bug in my eye and I'm trying to suffocate him." - Family Guy

05-02-2005, 10:51 PM	#15
mr402 Registered User Join Date: Jan 2004 Location: Elmira, Oregon Posts: 449	Whooo Hoooo! Looking nice. Can't wait to see it at our next get together. __________________ Enjoying life again. Time to get those big blocks rolling.

05-03-2005, 12:29 AM	#16
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	just more gizmos and gadgets. thanks guy __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler



Register or Log In To remove these advertisements.

05-04-2005, 01:11 AM	#17
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	well this PS pump is kicking my @$$ i bought aftermarket brackets for it and a seal kit since it leaks like a pig. well it was fun puting the seal kit in (not that hard) but then i put it back together and realized i needed to drill a hole in the case to get access to another threaded hole on the pump inside, well with the new "O" ring the pump did not want to come back apart. once i got it all back apart got the hole drilled and put today i started messing around with the brackets and tapping the block so it could be bolted on.then realized that my valve covers BOTH have a big hole (like where a cap would go but they arent threaded) and a PCV port. so now i have to figure out what to run in all the holes. one will be a PCV and the two big holes will be both breathers probably, but what about the other PCV size hole??? also had to go the the auto store twice to get the right size belt for the PS. and tomorrow i get to go to the dealership to find the gromets and stupid stuff. at this point i am frustrated with all the little issues and you can tell by the way the shop looks. Attached Images __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

05-04-2005, 01:12 AM	#18
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	and more Attached Images __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

05-04-2005, 01:38 AM	#19
68plus4sub Registered User Join Date: Jan 2004 Location: Portland, Oregon Posts: 210	YEAH man!! I like those heads as well; very cool. I think maybe I'll take a closer look sometime.....like maybe at your house.......like maybe about 2 in the morning....like maybe with a REALLY quiet air gun!!!!!!! I should get a thread going like this, it's cool. As little as I work on the burb, the thread would be gone in a matter of days!! __________________ 1972 Chevrolet Suburban ('68 front clip), 2wd, 350/350, factory tilt 2008 Kawasaki Concours 14 1997 Harley-Davidson Soft Tail Custom 1948 Chevrolet Coupe (project) 1972 Porsche 914 Last edited by 68plus4sub; 05-04-2005 at 01:39 AM.

05-04-2005, 09:01 AM	#20
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	we wont have the same valve covers anymore, these are center bolt __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

05-04-2005, 09:41 AM	#21
silvertonguedevil Senior Member Join Date: May 2004 Location: Seaside, Oregon Posts: 1,789	Nice work! Can't wait to check out the difference! __________________ -Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4

05-04-2005, 07:15 PM	#22
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	nice of you to join us, where ya been? __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

05-04-2005, 07:35 PM	#24
joelboxt 71 Cheyenne SWB Fleetside Join Date: Jan 2005 Location: Sarnia, Ontario, Canada Posts: 403	hey 68w/sbc406, you should post some more pictures of the complete engine with the intake on it. so we can see how nice it looks. joel __________________

05-04-2005, 08:09 PM	#25
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	Have considered Copper collector gaskets ? I have them in my 84 and they are great. No blow out's. __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

Register or Log In To remove these advertisements.