|
|
|
12-23-2007, 07:59 PM
|
#1 |
|
Long Fleet Club
Join Date: Aug 2006
Location: Deer Park, TX
Posts: 5,666
|
Vortec engines
Is there a difference in headers for the vortecs. Is it just the intake side that is different?
__________________
Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules |
|
|
|
12-23-2007, 08:08 PM
|
#2 |
|
yes, i do
Join Date: Jun 2007
Location: Spokane, wa
Posts: 2,734
|
Re: Vortec engines
as far as i know all the difference is in the intake style. but i think that the header style is still the same
__________________
ERROR 404....... SNAPPY COMEBACK NOT FOUND  _______________________________________________________________________________________________ -60 Chevy C10, dead 350/good th350 combo, sitting on a 76 c10 blazer frame, built from 11 different vehicles "the abomination" -07 gmt900 silverado 1500 lt xcab z71, granite blue -81 suzuki gs650g "shelah"- current project -81 kz1000m1 csr "sarge" -next project (just beautification) -07 kawasaki vulcan classic vn900 |
|
|
|
|
12-23-2007, 08:17 PM
|
#3 |
|
Long Fleet Club
Join Date: Aug 2006
Location: Deer Park, TX
Posts: 5,666
|
Re: Vortec engines
ok I'm about to get a set of headers now to get them ready for the new engine. I looked at a pic of a vortec and it looks the same. I just cant remember what engine had the bolt between the two middle pipes. Also jeg's don't list any differences. Just a precautionary question befor I spend $200
__________________
Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules |
|
|
|
|
12-23-2007, 08:50 PM
|
#4 |
|
yes, i do
Join Date: Jun 2007
Location: Spokane, wa
Posts: 2,734
|
Re: Vortec engines
i believe that it was the 305 heads that had the 7th bolt on both sides
__________________
ERROR 404....... SNAPPY COMEBACK NOT FOUND _______________________________________________________________________________________________ -60 Chevy C10, dead 350/good th350 combo, sitting on a 76 c10 blazer frame, built from 11 different vehicles "the abomination" -07 gmt900 silverado 1500 lt xcab z71, granite blue -81 suzuki gs650g "shelah"- current project -81 kz1000m1 csr "sarge" -next project (just beautification) -07 kawasaki vulcan classic vn900 |
|
|
|
|
12-23-2007, 08:57 PM
|
#5 |
|
Long Fleet Club
Join Date: Aug 2006
Location: Deer Park, TX
Posts: 5,666
|
Re: Vortec engines
The 305 that I had in my Camaro was the same as my 350. When I Finlay blew it up and upgraded to that
__________________
Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules |
|
|
|
|
12-24-2007, 08:34 AM
|
#6 |
|
yes, i do
Join Date: Jun 2007
Location: Spokane, wa
Posts: 2,734
|
Re: Vortec engines
there's certain 305 head castings that had 7 bolt holes. go to mortec.com and just look at the different casting numbers. you'd be surprised at the variety of heads that gm put out.
__________________
ERROR 404....... SNAPPY COMEBACK NOT FOUND _______________________________________________________________________________________________ -60 Chevy C10, dead 350/good th350 combo, sitting on a 76 c10 blazer frame, built from 11 different vehicles "the abomination" -07 gmt900 silverado 1500 lt xcab z71, granite blue -81 suzuki gs650g "shelah"- current project -81 kz1000m1 csr "sarge" -next project (just beautification) -07 kawasaki vulcan classic vn900 |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
