DBW pedal mounting bracket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 06-03-2014, 01:31 PM

DBW mounting bracket for Corvette Pedal

$60 Shipped via USPS (updated 10/4/2022)

Paypal: robhartley@aol.com, enter "CPB" in message block.

I did an LS3 (Gen IV motor) installation in my 1968 C10 a while back. When I got to the point of mounting the DBW pedal, I fabbed up this pedal bracket that bolts to the firewall where the factory pedal used to mount. The bracket is made out of 1/4" steel and has the holes punched in them for ease of installation.

It is set up to use a 2005+ Corvette DBW pedal (GM Part # 25835421) that can be purchased on Ebay for around $50-75. The color code of the Corvette pedal is the same as the Gen IV truck DBW pedal, you just have to swap 2 wires (I'll look those up and post). The nice part about the Corvette pedal, is that the pad is exactly identical to the gas pedal pad in the 71-72 trucks. This allows you can to use the factory stainless trim on it giving you a clean factory look. The pedal bracket is $50 shipped. If you have any questions let me know.

Rob

**************
GEN III truck pedal brackets can be found here: http://67-72chevytrucks.com/vboard/s...d.php?t=651123
**************

SeTx67 · 06-04-2014, 07:21 PM

Does the pedal arm bottom out on the floorboard at wot? What's your paypal?

**Hart_Rod** · 06-05-2014, 01:10 PM

Quote:

Originally Posted by SeTx67

Does the pedal arm bottom out on the floorboard at wot? What's your paypal?

No interference. It is placed to get full throw on the pedal. PM sent.

SeTx67 · 06-05-2014, 01:29 PM

Thanks for the info and all your help. PM replied

neal64ss · 06-06-2014, 01:55 AM

Whats the part number on that corvette pedal?

jackyl9999 · 06-06-2014, 03:01 AM

I would like one of these brackets. Can you send me your paypal Info.

Also interested in the Corvette pedal p/n if anyone has it.

**Hart_Rod** · 06-06-2014, 09:28 AM

Quote:

Originally Posted by neal64ss

Whats the part number on that corvette pedal?

25835421

Quote:

Originally Posted by jackyl9999

I would like one of these brackets. Can you send me your paypal Info.

Also interested in the Corvette pedal p/n if anyone has it.

25835421

I added the part number to the my first post.

Paypal is robhartley@aol.com. I pick up a new batch early next week, so it will be toward the end of next week before I ship it out. Thanks,

Rob

jackyl9999 · 06-06-2014, 11:09 AM

That will work fine for me. Paypal payment sent.

KMC3420 · 06-06-2014, 12:21 PM

So you only have to switch 2 wires to run this on a 04 5.3 motor?

**Hart_Rod** · 06-06-2014, 12:48 PM

Quote:

Originally Posted by jackyl9999

That will work fine for me. Paypal payment sent.

Thanks!

Quote:

Originally Posted by KMC3420

So you only have to switch 2 wires to run this on a 04 5.3 motor?

If you want to use the Corvette pedal. Post a picture of your DBW plug.

KMC3420 · 06-08-2014, 09:32 AM

I don't have my pedal yet. I have an 04 5.3. Just trying to plan this out and the pedal you have is the best pedal I have seen so far.

mutt_1986 · 06-08-2014, 02:21 PM

I already have an 04 truck pedal. Will this bracket work

**Hart_Rod** · 06-08-2014, 08:22 PM

Quote:

Originally Posted by mutt_1986

I already have an 04 truck pedal. Will this bracket work

Can you post a picture of your pedal and the connector?

**Hart_Rod** · 06-11-2014, 09:44 AM

Quote:

Originally Posted by KMC3420

I don't have my pedal yet. I have an 04 5.3. Just trying to plan this out and the pedal you have is the best pedal I have seen so far.

I'm pretty sure the Corvette pedal will work, but I haven't tried it. Maybe do a little research on LS1Tech and see what you can find. I'll look also.

Quote:

Originally Posted by mutt_1986

I already have an 04 truck pedal. Will this bracket work

As is, if you mount the truck pedal to the bracket, I think it will push the pedal to far towards the driver. I'm going to do some more prototyping with the truck pedal to see what I can come up with.

Quote:

Originally Posted by jackyl9999

That will work fine for me. Paypal payment sent.

Steve - you pedal bracket will be shipped USPS today. Thanks,

**Hart_Rod** · 06-19-2014, 09:43 AM

Another picture of the setup.

jackyl9999 · 06-19-2014, 09:46 AM

Good Deal!

Thanks!!!

chevyguy_72 · 06-22-2014, 09:46 AM

I ordered one of these and it arrived promptly... Its a very nice heavy duty piece... plan on installing it with the vette pedal assembly this week

4x4k30 · 06-29-2014, 02:18 AM

do you have a bracket for the 73 up ? I got a 77 with a 6.0 dbw pedal mine sets to high

**Hart_Rod** · 06-29-2014, 05:15 PM

Quote:

Originally Posted by chevyguy_72

I ordered one of these and it arrived promptly... Its a very nice heavy duty piece... plan on installing it with the vette pedal assembly this week

Thanks!

Quote:

Originally Posted by jackyl9999

Good Deal!

Thanks!!!

Thank you!

Quote:

Originally Posted by 4x4k30

do you have a bracket for the 73 up ? I got a 77 with a 6.0 dbw pedal mine sets to high

Can you post pictures of where the pedal would mount?

4x4k30 · 06-29-2014, 09:08 PM

my pedal is even with the brake pedal and its a truck pedal with no sweivel my foot gets tired here are a couple fuzzy pics I used the factory 2500hd pedal mount I just lowered it a little and drilled new holes

**Hart_Rod** · 06-29-2014, 09:48 PM

Quote:

Originally Posted by 4x4k30

my pedal is even with the brake pedal and its a truck pedal with no sweivel my foot gets tired here are a couple fuzzy pics I used the factory 2500hd pedal mount I just lowered it a little and drilled new holes

Thanks for the pics. I'm going to have to find a local truck and do some measuring.

**Hart_Rod** · 02-16-2015, 09:33 AM

Quote:

Originally Posted by 4x4k30

do you have a bracket for the 73 up ? I got a 77 with a 6.0 dbw pedal mine sets to high

OK guys. I just picked up a clean one owner 86, so now I have a guinea pig to build a bracket. Who's still interested?

Houston Ben · 06-30-2014, 11:01 AM

Hey Hart Rod,
Was busy and didn't get a chance to take a pic of my 86' and now im out of town. I hope these work for the square body trucks!! Looking forward to your findings!

jackyl9999 · 07-21-2014, 04:21 AM

Hart rod,
Do you happen to have a link to the info for repinning the DBW plug so I can use the vette pedal?

I am about ready to dive into this part of the project. I have looked on here and Ls1tech and was not able to find anything.

**Hart_Rod** · 07-26-2014, 10:39 AM

Quote:

Originally Posted by Houston Ben

Hey Hart Rod,
Was busy and didn't get a chance to take a pic of my 86' and now im out of town. I hope these work for the square body trucks!! Looking forward to your findings!

I think they will but I just got back from a week long mission trip to Haiti, so I haven't had time to dig more into it. Hopefully this week or next.

Quote:

Originally Posted by jackyl9999

Hart rod,
Do you happen to have a link to the info for repinning the DBW plug so I can use the vette pedal?

I am about ready to dive into this part of the project. I have looked on here and Ls1tech and was not able to find anything.

I will try to get some pictures taken today or tomorrow to show the difference. Bump this to the top if I haven't by tomorrow evening.

06-03-2014, 01:31 PM	#1
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,859	DBW pedal mounting bracket DBW mounting bracket for Corvette Pedal $60 Shipped via USPS (updated 10/4/2022) Paypal: robhartley@aol.com, enter "CPB" in message block. I did an LS3 (Gen IV motor) installation in my 1968 C10 a while back. When I got to the point of mounting the DBW pedal, I fabbed up this pedal bracket that bolts to the firewall where the factory pedal used to mount. The bracket is made out of 1/4" steel and has the holes punched in them for ease of installation. It is set up to use a 2005+ Corvette DBW pedal (GM Part # 25835421) that can be purchased on Ebay for around $50-75. The color code of the Corvette pedal is the same as the Gen IV truck DBW pedal, you just have to swap 2 wires (I'll look those up and post). The nice part about the Corvette pedal, is that the pad is exactly identical to the gas pedal pad in the 71-72 trucks. This allows you can to use the factory stainless trim on it giving you a clean factory look. The pedal bracket is $50 shipped. If you have any questions let me know. Rob ************ GEN III truck pedal brackets can be found here: http://67-72chevytrucks.com/vboard/s...d.php?t=651123 ************ Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 10-04-2022 at 10:53 AM.

06-04-2014, 07:21 PM	#2
SeTx67 Registered User Join Date: May 2013 Location: Lumberton, TX Posts: 795	Re: DBW pedal mounting bracket Does the pedal arm bottom out on the floorboard at wot? What's your paypal? __________________ 67 SWB LS2/4l70e... http://67-72chevytrucks.com/vboard/s...d.php?t=587435

06-05-2014, 01:29 PM	#4
SeTx67 Registered User Join Date: May 2013 Location: Lumberton, TX Posts: 795	Re: DBW pedal mounting bracket Thanks for the info and all your help. PM replied __________________ 67 SWB LS2/4l70e... http://67-72chevytrucks.com/vboard/s...d.php?t=587435

06-06-2014, 01:55 AM	#5
neal64ss Registered User Join Date: Mar 2014 Location: Russellville, AR Posts: 81	Re: DBW pedal mounting bracket Whats the part number on that corvette pedal?

06-06-2014, 03:01 AM	#6
jackyl9999 Registered User Join Date: Feb 2003 Location: Paragould, Ar Posts: 571	Re: DBW pedal mounting bracket I would like one of these brackets. Can you send me your paypal Info. Also interested in the Corvette pedal p/n if anyone has it. __________________ 1970 Gmc Grande Sierra Swb 2wd LSX (LQ4/4L80e) 1990 K1500 Daily

06-06-2014, 11:09 AM	#8
jackyl9999 Registered User Join Date: Feb 2003 Location: Paragould, Ar Posts: 571	Re: DBW pedal mounting bracket That will work fine for me. Paypal payment sent. __________________ 1970 Gmc Grande Sierra Swb 2wd LSX (LQ4/4L80e) 1990 K1500 Daily

06-06-2014, 12:21 PM	#9
KMC3420 Registered User Join Date: Dec 2012 Location: Harrison, AR Posts: 1,069	Re: DBW pedal mounting bracket So you only have to switch 2 wires to run this on a 04 5.3 motor? __________________ Keagan 68 SWB C-10 original 350 A/C 503 Mean Green

06-08-2014, 09:32 AM	#11
KMC3420 Registered User Join Date: Dec 2012 Location: Harrison, AR Posts: 1,069	Re: DBW pedal mounting bracket I don't have my pedal yet. I have an 04 5.3. Just trying to plan this out and the pedal you have is the best pedal I have seen so far. __________________ Keagan 68 SWB C-10 original 350 A/C 503 Mean Green

06-08-2014, 02:21 PM	#12
mutt_1986 Registered User Join Date: Jul 2008 Location: El Dorado, Ar Posts: 10	Re: DBW pedal mounting bracket I already have an 04 truck pedal. Will this bracket work

06-19-2014, 09:43 AM	#15
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,859	Re: DBW pedal mounting bracket Another picture of the setup. Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

06-19-2014, 09:46 AM	#16
jackyl9999 Registered User Join Date: Feb 2003 Location: Paragould, Ar Posts: 571	Re: DBW pedal mounting bracket Good Deal! Thanks!!! __________________ 1970 Gmc Grande Sierra Swb 2wd LSX (LQ4/4L80e) 1990 K1500 Daily

06-22-2014, 09:46 AM	#17
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Broomfield, CO Posts: 956	Re: DBW pedal mounting bracket I ordered one of these and it arrived promptly... Its a very nice heavy duty piece... plan on installing it with the vette pedal assembly this week __________________ Current Rides: Vintage Evil - 72 Chevy C10 (Always a work in progress) Vintage Evil Build Thread EvilK5 - 71 K5 Blazer Evil Twin - 2006 Suzuki M109R EvilDmax- 2018 GMC 2500 Denali Duramax

06-29-2014, 02:18 AM	#18
4x4k30 Registered User Join Date: Jun 2003 Location: ga Posts: 630	Re: DBW pedal mounting bracket do you have a bracket for the 73 up ? I got a 77 with a 6.0 dbw pedal mine sets to high __________________ 4x4k30 if trouble was money i would have plenty

06-29-2014, 09:08 PM	#20
4x4k30 Registered User Join Date: Jun 2003 Location: ga Posts: 630	Re: DBW pedal mounting bracket my pedal is even with the brake pedal and its a truck pedal with no sweivel my foot gets tired here are a couple fuzzy pics I used the factory 2500hd pedal mount I just lowered it a little and drilled new holes Attached Images __________________ 4x4k30 if trouble was money i would have plenty Last edited by 4x4k30; 06-29-2014 at 09:13 PM.

06-30-2014, 11:01 AM	#23
Houston Ben Registered User Join Date: May 2013 Location: Houston Texas Posts: 713	Re: DBW pedal mounting bracket Hey Hart Rod, Was busy and didn't get a chance to take a pic of my 86' and now im out of town. I hope these work for the square body trucks!! Looking forward to your findings!



Register or Log In To remove these advertisements.

07-21-2014, 04:21 AM	#24
jackyl9999 Registered User Join Date: Feb 2003 Location: Paragould, Ar Posts: 571	Re: DBW pedal mounting bracket Hart rod, Do you happen to have a link to the info for repinning the DBW plug so I can use the vette pedal? I am about ready to dive into this part of the project. I have looked on here and Ls1tech and was not able to find anything. __________________ 1970 Gmc Grande Sierra Swb 2wd LSX (LQ4/4L80e) 1990 K1500 Daily

Register or Log In To remove these advertisements.