who can recognize this motor for me? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oldblue1968chevy · 01-11-2009, 05:46 PM

What sbc v8 motor is this?

thanks!

red69ss · 01-11-2009, 05:59 PM

get the casting numbers which are located behind drivers side head and someone can tell you hard to tell just looking at one you can sometimes tell by looking at harmonic balancer

**El Jay** · 01-11-2009, 06:01 PM

www.mortec.com

**truckdude239** · 01-11-2009, 06:05 PM

looks like a 327

**LockDoc** · 01-11-2009, 06:53 PM

-
You need to hook the tube up from the back of the air cleaner to the valve cover. Looks like it is disconnected.

LockDoc

**70cst** · 01-11-2009, 06:57 PM

I know! Know!! It's a V8 Sorry..thats as far as I can go.

Tx Firefighter · 01-11-2009, 07:23 PM

I can narrow it down to either a 262, 265, 267, 283, 302, 305, 307, 327, 350, or a 400 from that picture.

*Cunit69* · 01-11-2009, 08:16 PM

Quote:

Originally Posted by Tx Firefighter

I can narrow it down to either a 262, 265, 267, 283, 302, 305, 307, 327, 350, or a 400 from that picture.

You can't tell without running the #'s

DB Smith · 01-11-2009, 08:21 PM

Quote:

Originally Posted by Cunit69

You can't tell without running the #'s

Even then you can't be ABSOLUTELY sure...it could have been stroked !! (but that would an unlikely combination with the stock intake)

Prostreet 72 · 01-17-2009, 01:37 AM

Quote:

Originally Posted by Tx Firefighter

I can narrow it down to either a 262, 265, 267, 283, 302, 305, 307, 327, 350, or a 400 from that picture.

Wow! That's what I was thinking too! Funny!

Sorry guys, It's late and I started on the wrong page of the tread. I have to get some sleep.........

Longhorn Man · 01-11-2009, 07:25 PM

I will guess it is a 305... but it'll be sold as a 350!

67_C-30 · 01-11-2009, 07:45 PM

Quote:

Originally Posted by Longhorn Man

I will guess it is a 305... but it'll be sold as a 350!

So true. In fact, I don't think I've ever seen a used 305. Where did they all go???

67_C-30 · 01-11-2009, 07:48 PM

In all seriousness, it appears have the 8" balancer most common with 350's, but even that doesn't mean anything. The pulley system is later than this generation truck, so it is likely a later model engine also. Looking up the casting numbers on he back of the block is the only way to know for sure. The driver's side dipstick dates it pre-1981.

Bus Ted Knuckle · 01-11-2009, 07:43 PM

I know the answer to this question...it is a small block chevrolet motor.

thirdstreettito · 01-11-2009, 07:58 PM

I'm thinking its a 350, just because ALL of it looks exactly like my 350. But I could be wrong.

tcb-1 · 01-11-2009, 08:06 PM

is it in the 68 in your avatar? if so, my bet is for a 327.

then again, I've been wrong a couple million times lately.......

primered_junk · 01-11-2009, 08:24 PM

Ooooohhhhh Is it one of them there 383 "stroker" motors every vehicle for sale has?

69-350 · 01-11-2009, 08:25 PM

never underestimate the power of mottled together-ed-ness.

Like my 72... 305 block, 2bbl 283-327 manifold, early 60's carb, pre 73 alternator brackets though, points distributor. Talk about a junkyard dog. PO's are crazy.

Anybody remember the years on the dipstick sides? Also, there should maybe be a prefix code on the front of the block. 305's have a seperate unique number, and if I remember right, the other prefixes don't really indicate which block, unless it's a 305. Can't remember how the rest go though.

One more thing. Sure it ain't one of them Corvette-option trucks' motors?

royo · 01-11-2009, 08:30 PM

see the plug in front of intake on the block . I say its a 350 ci that came in a truck. it has no emi or egr and ram horn mans so i say 69-72 350

chevymad · 01-11-2009, 08:39 PM

Considering that the 68 327 in my car is an 010 block.. same block as many 350s and some 302s.. Even the casting # won't tell you exclusively. I see mortec says the 010 block started in 69.. but I pulled the motor out of an original 1 owner 68 impala myself. So they appear to be a year off.

**WorkinLonghorn** · 01-11-2009, 08:44 PM

BY THE WAY, you need to fix that rubber fuel line that is hanging over the exhaust manifold!!! Run as little (preferranly none) rubber on that line as possible but in any case keep it away from heat sources. WLH
PS. I say it's a 70's 350 but you never know.

oldblue1968chevy · 01-11-2009, 08:48 PM

its a rebuilt lil bit newer motor, so a few say 350? 327? i'll try to get the #'s asap..thanks for the replys

larry may · 01-11-2009, 08:50 PM

Best number is on the block under where the alternator is mounted . In front of the head stamped on the block providing the block has not been decked. Post that number and letters. This will give a better and closer ID of what you have posted . IMO

oldblue1968chevy · 01-11-2009, 08:52 PM

what does the term 'decked' mean, and so under the alterantor, i'll look there tomorow

**70cst** · 01-11-2009, 09:51 PM

You guys are good. I can only say it's not a 402BB.

01-11-2009, 05:46 PM	#1
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	who can recognize this motor for me? What sbc v8 motor is this? thanks! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-11-2009, 05:59 PM	#2
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: who can recognize this motor for me? get the casting numbers which are located behind drivers side head and someone can tell you hard to tell just looking at one you can sometimes tell by looking at harmonic balancer __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

01-11-2009, 06:01 PM	#3
El Jay Gone to greener pastures Join Date: May 2007 Location: Gateway to the Delta Posts: 7,354	Re: who can recognize this motor for me? www.mortec.com __________________ '69 Chevy 1/2 T LWB Stepper: Daily Beater '72 GMC 3/4 T Fleet: Another Daily Beater '72 Plymouth Gran Coupe: ? "Ah women. They make the highs higher and the lows more frequent." Friedrich Nietzsche "Never kick a fresh turd on a hot day." Harry S. Truman GUN CONTROL: Never having to say, "I missed you." Always fire two warning shots into your attacker's chest area before putting a bullet between his eyes. Paraphrased from Louis Awerbuck

01-11-2009, 06:05 PM	#4
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: who can recognize this motor for me? looks like a 327 __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

01-11-2009, 06:53 PM	#5
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,649	Re: who can recognize this motor for me? - You need to hook the tube up from the back of the air cleaner to the valve cover. Looks like it is disconnected. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

01-11-2009, 06:57 PM	#6
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,375	Re: who can recognize this motor for me? I know! Know!! It's a V8 Sorry..thats as far as I can go. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

01-11-2009, 07:23 PM	#7
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: who can recognize this motor for me? I can narrow it down to either a 262, 265, 267, 283, 302, 305, 307, 327, 350, or a 400 from that picture. __________________ I'm on the Instagram- @Gearhead_Kevin

01-11-2009, 07:25 PM	#11
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: who can recognize this motor for me? I will guess it is a 305... but it'll be sold as a 350!

01-11-2009, 07:48 PM	#13
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: who can recognize this motor for me? In all seriousness, it appears have the 8" balancer most common with 350's, but even that doesn't mean anything. The pulley system is later than this generation truck, so it is likely a later model engine also. Looking up the casting numbers on he back of the block is the only way to know for sure. The driver's side dipstick dates it pre-1981. __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! Last edited by 67_C-30; 01-11-2009 at 07:50 PM.

01-11-2009, 07:43 PM	#14
Bus Ted Knuckle Son of a gun Join Date: Jan 2007 Location: Hot Springs, Arkansas Posts: 1,636	Re: who can recognize this motor for me? I know the answer to this question...it is a small block chevrolet motor. __________________ Bill BEATERS ARE NEATER Last edited by Bus Ted Knuckle; 01-11-2009 at 07:44 PM.

01-11-2009, 07:58 PM	#15
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: who can recognize this motor for me? I'm thinking its a 350, just because ALL of it looks exactly like my 350. But I could be wrong. __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

01-11-2009, 08:06 PM	#16
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: who can recognize this motor for me? is it in the 68 in your avatar? if so, my bet is for a 327. then again, I've been wrong a couple million times lately....... __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson Last edited by tcb-1; 01-11-2009 at 08:20 PM.

01-11-2009, 08:24 PM	#17
primered_junk ASE master tech/machinist Join Date: May 2008 Location: Blue Mound Texas Posts: 303	Re: who can recognize this motor for me? Ooooohhhhh Is it one of them there 383 "stroker" motors every vehicle for sale has? __________________ "I sit here and I pray in my broken down Chevrolet....."

01-11-2009, 08:25 PM	#18
69-350 Oil trash and damn proud of it Join Date: Aug 2005 Location: Williston, ND Posts: 1,993	Re: who can recognize this motor for me? never underestimate the power of mottled together-ed-ness. Like my 72... 305 block, 2bbl 283-327 manifold, early 60's carb, pre 73 alternator brackets though, points distributor. Talk about a junkyard dog. PO's are crazy. Anybody remember the years on the dipstick sides? Also, there should maybe be a prefix code on the front of the block. 305's have a seperate unique number, and if I remember right, the other prefixes don't really indicate which block, unless it's a 305. Can't remember how the rest go though. One more thing. Sure it ain't one of them Corvette-option trucks' motors? __________________ Mark 1997 K1500 Z71, 14 bolt SF 3.73 posi, Bright Blue Metallic. 6" Superlift 1972 C-10, toolbox, p/s, 350/TH350/3.73 open, black int., bronze 2008 Dodge MegaCab. H&S tuned 6.7 Cummins. Fast Four Tons Some of my pics http://s107.photobucket.com/albums/m294/69-350/ Last edited by 69-350; 01-11-2009 at 08:32 PM.

01-11-2009, 08:30 PM	#19
royo Registered User Join Date: Feb 2007 Location: knoxville tn Posts: 1,013	Re: who can recognize this motor for me? see the plug in front of intake on the block . I say its a 350 ci that came in a truck. it has no emi or egr and ram horn mans so i say 69-72 350 __________________ nickle and dime Last edited by royo; 01-11-2009 at 08:32 PM.



Register or Log In To remove these advertisements.

01-11-2009, 08:39 PM	#20
chevymad Registered User Join Date: Jan 2001 Location: skamokawa, WA, USA Posts: 527	Re: who can recognize this motor for me? Considering that the 68 327 in my car is an 010 block.. same block as many 350s and some 302s.. Even the casting # won't tell you exclusively. I see mortec says the 010 block started in 69.. but I pulled the motor out of an original 1 owner 68 impala myself. So they appear to be a year off. __________________ 70 C10 long fleet, 355/200 4r, 6 lug disc conversion, 3" drop 70 gmc changed to 67/8 chevy, 454 with voodoo cam, th400, all 74 running gear.. in progress

01-11-2009, 08:44 PM	#21
WorkinLonghorn Senior Member Join Date: Dec 2006 Location: Studio City, Calif. Posts: 2,883	Re: who can recognize this motor for me? BY THE WAY, you need to fix that rubber fuel line that is hanging over the exhaust manifold!!! Run as little (preferranly none) rubber on that line as possible but in any case keep it away from heat sources. WLH PS. I say it's a 70's 350 but you never know. __________________ '69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, stereo speakers, 2nd owner, Work-Truck supreme.

01-11-2009, 08:48 PM	#22
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: who can recognize this motor for me? its a rebuilt lil bit newer motor, so a few say 350? 327? i'll try to get the #'s asap..thanks for the replys __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-11-2009, 08:50 PM	#23
larry may Senior Member Join Date: Jul 2005 Location: MISSOURI Posts: 3,256	Re: who can recognize this motor for me? Best number is on the block under where the alternator is mounted . In front of the head stamped on the block providing the block has not been decked. Post that number and letters. This will give a better and closer ID of what you have posted . IMO __________________ The biggest problem people have, is other people Thou shalt be cool and not hassle Be a site supporter. The heart of the wise inclines to the right, but the heart of the fool inclines to the left." Ecclesiastes 10:2 Last edited by larry may; 01-11-2009 at 08:51 PM.

01-11-2009, 08:52 PM	#24
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: who can recognize this motor for me? what does the term 'decked' mean, and so under the alterantor, i'll look there tomorow __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-11-2009, 09:51 PM	#25
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,375	Re: who can recognize this motor for me? You guys are good. I can only say it's not a 402BB. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

Register or Log In To remove these advertisements.