Porterbuilt Direct

[PBFAB.COM]

Through Porterbuilt Direct, we will be expanding our product line, and offering these products to forum members at a discounted price, but with the same quality Porterbuilt customer service! We will also begin running "monthly specials" on select Porterbuilt products. Let us know if there are any specials you would like to see and we will see what we can do!

Thanks,
- Porterbuilt Direct

for questions on Porterbuilt Specials PM or Email
porterbuiltdirect@gmail.com

[rob32472]

great I need a set of firewall panels and a rear cab filler for my 68..... price with shipping to 30157

[BuiltwithIvy]

HUGE DISCOUNTS FOR BOLT ON BODY DROPS!!! They look fantastic, I just can't afford them

[Kylepat07]

Looking forward to seeing the specials...sooner the better lol

[PBFAB.COM]

Originally Posted by rob32472

great I need a set of firewall panels and a rear cab filler for my 68..... price with shipping to 30157

PM sent

[PBFAB.COM]

Let Us know what you guys would like to see! right now we are running a special on a few CPP products but as for our manufactured Items we may let you guys decide :-)

[nds1968]

I have been patiently waiting for your tubular A-arms to come on sale

[PBFAB.COM]

Originally Posted by nds1968

I have been patiently waiting for your tubular A-arms to come on sale

PM sent

[74baggedbug]

Can you post a picture of The filler that goes being the bench seat for a 68 thanks
Posted via Mobile Device

[PBFAB.COM]

Originally Posted by 74baggedbug

Can you post a picture of The filler that goes being the bench seat for a 68 thanks
Posted via Mobile Device

Originally we made the rear panels in 3 pieces (the middle and then two ends), but have since switched to 5 pieces. It makes the two end capes easier to install that way. The main panel bolts in at the bottom using bosses in the floor where the fuel tank mmounts used to be.

Keep in mind, we don't provide any mounting hardware. It isn't difficult to install, but will require you to make some mounting provisions.

Here's another member who is installing them (post# 145):

http://67-72chevytrucks.com/vboard/s...=475791&page=6

[mistertrose]

Perfect timing! This is the year my 68 rebuild kicks in to high gear!!! Looking at full front and rear dropmember options, firewall patch panels, and who knows what else....

[PBFAB.COM]

Originally Posted by mistertrose

Perfect timing! This is the year my 68 rebuild kicks in to high gear!!! Looking at full front and rear dropmember options, firewall patch panels, and who knows what else....

PM sent

[rhd_c10]

67-72 hood hinges w/gas shocks

[PBFAB.COM]

Originally Posted by rhd_c10

67-72 hood hinges w/gas shocks

PM sent

[gofast68c20]

Hey Nate How about a special on the mild dropmember front that I soooo badly need to match my rear.. Jerimiah
Posted via Mobile Device
Posted via Mobile Device

[VA72C10]

cool! Glad to see your business continue to grow!

[lolife99]

Any plans to sell the CPP Modular spindles?

EDIT:
Nevermind,... you are already doing it here in the Vendor Marketplace!
http://67-72chevytrucks.com/vboard/s....php?p=5135106

[Bennett68C10]

Nate I already sent you a PM on the tubular control arms. Looking for price shipped to 08724. Have a couple questions about them too.

[Bennett68C10]

Originally Posted by Bennett--G4L

Nate I already sent you a PM on the tubular control arms. Looking for price shipped to 08724. Have a couple questions about them too.

Placed my order today , Thanks again Nate and Jon for great customer service.

[classicchev]

So what is the story with "american pastimes" in the vendor section, now there is a "direct" ??

[PBFAB.COM]

Originally Posted by classicchev

So what is the story with "american pastimes" in the vendor section, now there is a "direct" ??

American Pastimes is a business out of California that buys and re-sells some of our parts.... just like many other companies. They are not a part of Porterbuilt.

On the other hand, "Porterbuilt Direct" is a part of Porterbuilt, and it's specific purpose and intent is to assist me in the on-line marketing and on-line sales. It's just a name I liked, and figured it would help differentiate between my personal username.

In the past, I have not personally been able to spend the appropriate amount of time to focus on the on-line marketing/sales. I have done a prettyy good job keeping up with answering questions on the forums, via e-mail, through text messages, and call-backs.

In an effort to market my products on-line, and also other companies products that we sell, I figured now was a good time to get some more help and focus on the on-line marketing. We will also be running ads in the magazines and will begin attending shows as well.

Hopefully this answers your questions, and feel free to ask if there are any more.

Nate

[classicchev]

Originally Posted by porterbuilt

American Pastimes is a business out of California that buys and re-sells some of our parts.... just like many other companies. They are not a part of Porterbuilt.

On the other hand, "Porterbuilt Direct" is a part of Porterbuilt, and it's specific purpose and intent is to assist me in the on-line marketing and on-line sales. It's just a name I liked, and figured it would help differentiate between my personal username.

In the past, I have not personally been able to spend the appropriate amount of time to focus on the on-line marketing/sales. I have done a prettyy good job keeping up with answering questions on the forums, via e-mail, through text messages, and call-backs.

In an effort to market my products on-line, and also other companies products that we sell, I figured now was a good time to get some more help and focus on the on-line marketing. We will also be running ads in the magazines and will begin attending shows as well.

Hopefully this answers your questions, and feel free to ask if there are any more.

Nate

Friendly competition... And your pretty much in control, thats good marketing! Now you can mass produce a few popular things, and move them to vendors.

BTW, is my stuff ready to ship?? Still waiting on the rims, but should be soon.

Darren

[PBFAB.COM]

Originally Posted by classicchev

Friendly competition... And your pretty much in control, thats good marketing! Now you can mass produce a few popular things, and move them to vendors.

BTW, is my stuff ready to ship?? Still waiting on the rims, but should be soon.

Darren

I think it will work out well... only time will tell.

Just let me know when the wheels are ready, and we will make it so it all arrives at the same time!

Nate

[taank]

trailing arm crossmember for 68 c10

[taank]

Originally Posted by taank

trailing arm crossmember for 68 c10

55033