1962 Chevy C40 factory rims or replacements

[62'C40]

I have a 1962 Chevy C40 that I had all 6 rims stolen off of. I haven't been able to locate the rims from any sources and was wanting to see what you guys have done to replace them. The truck is all original and I really don't want to swap out the front end unless unless it is my only option.

[geezer#99]

Refresh our foggy memory!
How big and how many lugs?
Post or find us a pic.

[paulspickupparts]

Also what is your goal in tire size. Lot of variables here. Split , non split tubeless etc

[Ken Cook]

We run a wrecker service. I once had an 1983 F600 rollback that had the locking ring wheels. No one wanted to work on them. The local truck parts place wanted $200 per wheel, the new style. I went to the International dealer and even though it was not an International, I was able to order them for $125 each. They just wanted the bolt pattern and rim size.

[DPowers]

Yes they are 8 lug.

[62'C40]

I need 10 lugs that look like that with the small center.

[mongocanfly]

like this?.....http://67-72chevytrucks.com/vboard/s...d.php?t=518025

[62'C40]

that is exactly what they looked like.

[mongocanfly]

this may or may not help...at about post 70...http://67-72chevytrucks.com/vboard/s...=384188&page=3

[DPowers]

Good to talk to you. Will keep my eyes open.

[62'C40]

They are the widow makers in 18 inch and 10 lug. I tried to give diameter and stud spacing to a few local semi dealers but nothing was available. That picture is exactly the rims I need. I would like to go back to those since the truck is all stock.

[mongocanfly]

62c40...the wheels in those pics are 8 lug...not 10