OR Parting Chevy 67 trucks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chrisj930 · 09-18-2011, 03:38 PM

Parting out 2 67 Trucks

6-lug 3.73 posi rearend $250 - sold

SWB 2pc driveline with new carrier bearing $60

Front clip with minimal rust but needs some bodywork. Complete with core support, grille, hood, fenders. (no RH inner) $250

CST doors that are rusted out but have salvagable chrome vent wings and glass. $75

Stainless CST windsheild trim in good shape $40

Pretty solid factory A/C cab. Need driver outer rocker. Radio area is cut. $250

2 in cab gas tanks $75 each - 1 sold - 1 left

Saddle tanks $30 each - sold

Good complete doors - cut for speakers inside $100/pair

6-lug Ralleys with caps, rings and tires. Need to be cleaned up. $200

E-brake assemblies. $40

Gauges with bezel. $30

Glove box door - no emblem. $20

Bench seat - needs recovered. $50

AT TH400 steering column-indicator broken $75

Engine wiring harness. $30

Rear view mirror $20

Perfect blue sunvisers $40

Ok shape drivers fender $75

Pretty poor shape chrome front bumper with short chrome guards $50

Power steering box ( I think this is a 67 only part) $100

Power brake cylinder and booster $50

3/4 ton coil spring frame with axle and front suspension $200

Other parts available.

All prices plus shipping

I do not have any seatbelts, lighters, deluxe dash knobs, steering wheels, factory outside mirrors, CST side trim, rear bumper brackets or short bed available.

Make offers if my price is out of line. Don't want to put a bunch of effort into giving stuff away, but tired of looking at it nonetheless.

GobbleStalker · 09-18-2011, 03:51 PM

Were any of these truck 327 engine as I am looking for the vent on the back of the motor that hooks up to the carb. Also is the cab a small or large window cab?

Thanks
Kevin

chrisj930 · 09-18-2011, 03:53 PM

One was a 327.

You looking for the tube that bolts to the manifold? Pretty sure I have that.

chrisj930 · 09-18-2011, 03:53 PM

Quote:

Originally Posted by GobbleStalker

Were any of these truck 327 engine as I am looking for the vent on the back of the motor that hooks up to the carb. Also is the cab a small or large window cab?

Thanks
Kevin

Cab is a small window

chrisj930 · 09-18-2011, 04:06 PM

Quote:

Originally Posted by GobbleStalker

Were any of these truck 327 engine as I am looking for the vent on the back of the motor that hooks up to the carb. Also is the cab a small or large window cab?

Thanks
Kevin

These are the 2 that I have

GobbleStalker · 09-18-2011, 07:09 PM

Quote:

Originally Posted by chrisj930

These are the 2 that I have

How much for them both?

Shipped to 13601 NY

Where is the cab located?

chrisj930 · 09-18-2011, 10:27 PM

Quote:

Originally Posted by GobbleStalker

How much for them both?

Shipped to 13601 NY

Where is the cab located?

How about $30 shipped for both?

Cab is in Portland OR. Probably just about as far away from you as possible.

GobbleStalker · 09-19-2011, 12:07 AM

Quote:

Originally Posted by chrisj930

How about $30 shipped for both?

Cab is in Portland OR. Probably just about as far away from you as possible.

Perfect I'll take them. Paypal info?

Thanks
Kevin

gonnuts · 09-18-2011, 04:22 PM

Any seat belts? I know one was blue, what colour is the other?

chrisj930 · 09-18-2011, 04:26 PM

Quote:

Originally Posted by gonnuts

Any seat belts? I know one was blue, what colour is the other?

No seat belts. Sorry.
Posted via Mobile Device

70-Shorty · 09-18-2011, 05:50 PM

are you possibly going to part out the front clip? I need a decent 67 passenger side fender. Shipping to 91762, can pick up at local greyhound if that works.
Tim

chrisj930 · 09-18-2011, 06:20 PM

Quote:

Originally Posted by 70-Shorty

are you possibly going to part out the front clip? I need a decent 67 passenger side fender. Shipping to 91762, can pick up at local greyhound if that works.
Tim

Hi Tim

I have 2 drivers fenders that are decent but the pass fenders both need work.

I'd rather keep it complete at this point.

Chris
Posted via Mobile Device

**michael bustamante** · 09-19-2011, 02:37 PM

You willing to sell the 2 vent windows in the pic? Hows the chrome?

chrisj930 · 09-19-2011, 11:55 PM

Quote:

Originally Posted by michael bustamante

You willing to sell the 2 vent windows in the pic? Hows the chrome?

Yes I sell separate. Chrome is OK. Definetely "driver" quality. Biggest issue is that the lower mount stud needs to be repaired on both sides.

**michael bustamante** · 09-19-2011, 02:38 PM

Also the cig lighter in the cab pic. Is it available? oh. nevermind I just saw your list of not avail. how about the window cranks handles? can I see a pic of what ones were in the 67s?

**PICKMUP** · 09-19-2011, 10:21 PM

Ttt

**michael bustamante** · 09-20-2011, 11:53 AM

Ill have to pass on the vents, sorry. how are the window crank handles? the door opener ones look good. if the 67 window crank handles look good I might have to take all 4 pieces

67mater · 09-20-2011, 05:59 PM

would you sell the pass side headlight bezel? dont have the drivers side do you?

chrisj930 · 09-21-2011, 01:00 AM

Quote:

Originally Posted by 67mater

would you sell the pass side headlight bezel? dont have the drivers side do you?

Posted via Mobile Device

chewychevy67 · 09-21-2011, 12:24 AM

did the 327 truck have a/c? i need the fan blade and the clutch. if you have could you post a pic? Rod.

chrisj930 · 09-21-2011, 01:02 AM

Quote:

Originally Posted by chewychevy67

did the 327 truck have a/c? i need the fan blade and the clutch. if you have could you post a pic? Rod.

Posted via Mobile Device

chrisj930 · 09-21-2011, 01:02 AM

I think I have 2 sets of bezels.

I'll check tomorrow night.
Posted via Mobile Device

chrisj930 · 09-21-2011, 01:04 AM

Yes, the 327 truck had AC. I will post a pic tomorrow.
Posted via Mobile Device

chewychevy67 · 09-21-2011, 11:56 PM

if it is the stock 1967 fan and clutch i will take it. pending pic's.

chrisj930 · 09-22-2011, 11:15 AM

Quote:

Originally Posted by chewychevy67

if it is the stock 1967 fan and clutch i will take it. pending pic's.

Here are a couple pics of the 2 that I have. Let me know if one of these is what you're after.

09-18-2011, 03:38 PM	#1
chrisj930 Registered User Join Date: Oct 2010 Location: portland, OR Posts: 79	Parting Chevy 67 trucks Parting out 2 67 Trucks 6-lug 3.73 posi rearend $250 - sold SWB 2pc driveline with new carrier bearing $60 Front clip with minimal rust but needs some bodywork. Complete with core support, grille, hood, fenders. (no RH inner) $250 CST doors that are rusted out but have salvagable chrome vent wings and glass. $75 Stainless CST windsheild trim in good shape $40 Pretty solid factory A/C cab. Need driver outer rocker. Radio area is cut. $250 2 in cab gas tanks $75 each - 1 sold - 1 left Saddle tanks $30 each - sold Good complete doors - cut for speakers inside $100/pair 6-lug Ralleys with caps, rings and tires. Need to be cleaned up. $200 E-brake assemblies. $40 Gauges with bezel. $30 Glove box door - no emblem. $20 Bench seat - needs recovered. $50 AT TH400 steering column-indicator broken $75 Engine wiring harness. $30 Rear view mirror $20 Perfect blue sunvisers $40 Ok shape drivers fender $75 Pretty poor shape chrome front bumper with short chrome guards $50 Power steering box ( I think this is a 67 only part) $100 Power brake cylinder and booster $50 3/4 ton coil spring frame with axle and front suspension $200 Other parts available. All prices plus shipping I do not have any seatbelts, lighters, deluxe dash knobs, steering wheels, factory outside mirrors, CST side trim, rear bumper brackets or short bed available. Make offers if my price is out of line. Don't want to put a bunch of effort into giving stuff away, but tired of looking at it nonetheless. Attached Images Last edited by chrisj930; 10-03-2011 at 11:01 PM.

09-18-2011, 03:51 PM	#2
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: Parting Chevy 67 trucks Were any of these truck 327 engine as I am looking for the vent on the back of the motor that hooks up to the carb. Also is the cab a small or large window cab? Thanks Kevin __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

09-18-2011, 03:53 PM	#3
chrisj930 Registered User Join Date: Oct 2010 Location: portland, OR Posts: 79	Re: Parting Chevy 67 trucks One was a 327. You looking for the tube that bolts to the manifold? Pretty sure I have that.

09-18-2011, 04:22 PM	#9
gonnuts Registered User Join Date: Sep 2010 Location: Langdon, Ab Posts: 348	Re: Parting Chevy 67 trucks Any seat belts? I know one was blue, what colour is the other? __________________ 67 Chev SWB, 400 SB .040 over, vortec heads, comp XE268 cam, performer EPS intake, edel. 650 AVS carb, 700R4

09-18-2011, 05:50 PM	#11
70-Shorty Registered User Join Date: Jul 2010 Location: Ontario CA Posts: 317	Re: Parting Chevy 67 trucks are you possibly going to part out the front clip? I need a decent 67 passenger side fender. Shipping to 91762, can pick up at local greyhound if that works. Tim __________________ Ontario CA•70 Chevy Shortbed Fleetside C-10 71 Chevy Longbed Fleetside C-20 (sold ) 63 Chevy II Nova SS 02 Ford F-150 Harley-Davidson supercharged 5.4 2000 Harley Roadking Hot Bike Baggers Mag Shoot http://s263.photobucket.com/albums/i...oot/?start=all some truck lettering & flame jobs http://www.flickr.com/photos/4950319...7602894916215/

09-19-2011, 02:37 PM	#13
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,850	Re: Parting Chevy 67 trucks You willing to sell the 2 vent windows in the pic? Hows the chrome? __________________ 1967custom

09-19-2011, 02:38 PM	#15
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,850	Re: Parting Chevy 67 trucks Also the cig lighter in the cab pic. Is it available? oh. nevermind I just saw your list of not avail. how about the window cranks handles? can I see a pic of what ones were in the 67s? __________________ 1967custom

09-19-2011, 10:21 PM	#16
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,134	Re: Parting Chevy 67 trucks Ttt __________________ Email: frankeham@comcast.net Phone: 360-956-7170

09-20-2011, 11:53 AM	#17
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,850	Re: Parting Chevy 67 trucks Ill have to pass on the vents, sorry. how are the window crank handles? the door opener ones look good. if the 67 window crank handles look good I might have to take all 4 pieces __________________ 1967custom

09-20-2011, 05:59 PM	#18
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: Parting Chevy 67 trucks would you sell the pass side headlight bezel? dont have the drivers side do you? __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

09-21-2011, 12:24 AM	#20
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,515	Re: Parting Chevy 67 trucks did the 327 truck have a/c? i need the fan blade and the clutch. if you have could you post a pic? Rod.

09-21-2011, 01:02 AM	#22
chrisj930 Registered User Join Date: Oct 2010 Location: portland, OR Posts: 79	Re: Parting Chevy 67 trucks I think I have 2 sets of bezels. I'll check tomorrow night. Posted via Mobile Device

09-21-2011, 01:04 AM	#23
chrisj930 Registered User Join Date: Oct 2010 Location: portland, OR Posts: 79	Re: Parting Chevy 67 trucks Yes, the 327 truck had AC. I will post a pic tomorrow. Posted via Mobile Device

09-21-2011, 11:56 PM	#24
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,515	Re: Parting Chevy 67 trucks if it is the stock 1967 fan and clutch i will take it. pending pic's.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.