P.S. pump pully? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ron's68 · 11-08-2002, 01:12 AM

Has anyone ever removed the pressed on power steering pump pully? How do you do this? Mine is from an 87 truck with a serpintine pully and I need to put on a V-belt pully. I would like some input before I start putting it on the press. Is the allen head on the end of the shaft something that needs to come off first? Thanks.

Mike C · 11-08-2002, 11:29 AM

You need a PS pump pulley remover. You can get one from Harbor Freight for between $10 and $20 depending on what they have in stock or on sale.

gangforward · 11-08-2002, 05:27 PM

My local Carquest autoparts store had the tool. I just brought in the pump and we yanked the old one off and put the new one on. I forced a $fiver on him as a tip - they were real nice about it.

Good Luck.

Ron's68 · 11-09-2002, 01:05 AM

Thanks for the replies. I'll be trying it this weekend. Hope it works, if not, oh well. A trip to pick&pull is always fun.

Ron's68 · 11-13-2002, 08:00 AM

Just an update. I got a remover/installer kit from Harbor Frieght for $10. It worked great. Easy to remove when I have the right tool.

Thanks again for the info.

11-08-2002, 01:12 AM	#1
Ron's68 Registered User Join Date: Mar 2001 Location: Modesto, ca Posts: 143	P.S. pump pully? Has anyone ever removed the pressed on power steering pump pully? How do you do this? Mine is from an 87 truck with a serpintine pully and I need to put on a V-belt pully. I would like some input before I start putting it on the press. Is the allen head on the end of the shaft something that needs to come off first? Thanks. __________________ 68 LWB, .040 over 350 with 10:1 pistons, balanced, vortec heads,comp 270H cam, air gap RPM manifold, holley 750, 4.10 posi and gear drive to annoy the neighbors.

11-08-2002, 11:29 AM	#2
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,715	You need a PS pump pulley remover. You can get one from Harbor Freight for between $10 and $20 depending on what they have in stock or on sale. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

11-09-2002, 01:05 AM	#4
Ron's68 Registered User Join Date: Mar 2001 Location: Modesto, ca Posts: 143	Thanks for the replies. I'll be trying it this weekend. Hope it works, if not, oh well. A trip to pick&pull is always fun. __________________ 68 LWB, .040 over 350 with 10:1 pistons, balanced, vortec heads,comp 270H cam, air gap RPM manifold, holley 750, 4.10 posi and gear drive to annoy the neighbors.

11-13-2002, 08:00 AM	#5
Ron's68 Registered User Join Date: Mar 2001 Location: Modesto, ca Posts: 143	Just an update. I got a remover/installer kit from Harbor Frieght for $10. It worked great. Easy to remove when I have the right tool. Thanks again for the info. __________________ 68 LWB, .040 over 350 with 10:1 pistons, balanced, vortec heads,comp 270H cam, air gap RPM manifold, holley 750, 4.10 posi and gear drive to annoy the neighbors.

11-08-2002, 05:27 PM	#3
gangforward Hootis is as Hootis does... Join Date: Nov 2002 Location: Southern Georgia Posts: 500	My local Carquest autoparts store had the tool. I just brought in the pump and we yanked the old one off and put the new one on. I forced a $fiver on him as a tip - they were real nice about it. Good Luck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.