Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
10-09-2016, 10:20 PM | #1 |
Registered User
Join Date: Nov 2015
Location: Bucks, PA
Posts: 100
|
Extra Parts from Project
I have some extra parts I'd like to sell that I've accumulated.
Cab dolly. SOLD Set of 4 wheels and tires. 6x5.5 bolt pattern, 15" diameter. Tires are not road worthy in my opinion but they do hold air. All wheels are in similar condition. $50 New, unused 67-72 inner cowl patch panel. $150 1 radiator support. Sold One passenger side front fender. SOLD Passenger side door. Needs the bottom patched. $25 S10 blazer bucket seats.$40 Black lap belts. SOLD Stock D44 steering arm off a 1972 K20. This should also fit a K10. $25 Stock front springs off a 1972 K20. SOLD Rear drum brakes from Eaton HO52. One shoe is cracked, everything else looks good. Pulled for a disc brake swap. Most of the hardware has been sold leaving the backing plates, dust covers, and drums. $50 quadrajet carb. Was running when I pulled it to swap in a holley. $75 Headers for a 350 off a C10. $25 Short sm465 adapter and coupling from a 67 k series truck. Small crack in adapter. Coupling is in good condition. $25 Driveshaft for a shortbed C10 with a TH400. Sold Drivers side inner fender. SOLD Pictures for most of this will be in the link below. I also have some miscellaneous small parts so ask if you need it. All sheet metal is for 69-72 trucks. Also looking to sell my C10 air ride project either whole or in pieces.http://67-72chevytrucks.com/vboard/s...d.php?t=770522 Part out prices: cab: SOLD Original doors that need minimal work. SOLD Bare frame: $450 front 5 lug suspension, including the front crossmember, spindles, brakes, control arms, etc. I cleaned and painted most of these parts. $300 Rear tubular trailing arms from POL. SOLD 6 lug rear axle with 3.73 rear gears. SOLD 69-72 hood: $125 Outer cowl. $50 I also have a NoLimit panhard bar and rear shock relocator kit with the shocks. SOLD If you need pictures of specific spots on items let me know and I will get them. I want to get rid of all of this stuff and focus on another project so its no longer worth paying for storage of these items to me. I would much rather sell this stuff on here, I'm at the point where I would rather scrap things than continue to deal with Craigslist
__________________
Daily Driver: 1972 K20 Project: 1967 Buick GS 340 Last edited by 7071lwb; 02-03-2019 at 07:40 PM. Reason: Update |
10-30-2016, 09:29 PM | #2 |
Registered User
Join Date: Nov 2015
Location: Bucks, PA
Posts: 100
|
Re: Extra Parts from Project
Fenders and radiator support are now removed from the truck. Open to any reasonable offer since I need to make room.
__________________
Daily Driver: 1972 K20 Project: 1967 Buick GS 340 |
11-27-2016, 05:43 PM | #3 |
Registered User
Join Date: Nov 2015
Location: Bucks, PA
Posts: 100
|
Re: Extra Parts from Project
Still have everything available. Would really like to get rid of some of this before it starts snowing.
__________________
Daily Driver: 1972 K20 Project: 1967 Buick GS 340 |
02-19-2017, 11:54 AM | #4 |
Registered User
Join Date: Nov 2015
Location: Bucks, PA
Posts: 100
|
Re: Extra Parts from Project
Ttt
__________________
Daily Driver: 1972 K20 Project: 1967 Buick GS 340 |
02-20-2017, 09:14 AM | #5 |
Senior Member
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,616
|
Re: Extra Parts from Project
interested in fenders, will pm for info
__________________
Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim |
02-21-2017, 11:59 AM | #6 |
Registered User
Join Date: Jul 2010
Location: Willingboro, NJ
Posts: 489
|
Re: Extra Parts from Project
I'm out of the area but I'm interested in the seats. Do you hang any pictures of the passenger seat?
__________________
Retired USAF - No rockets, no mortars, no bad guys shooting...No stress!!! My Build Thread: Project 72' Green http://67-72chevytrucks.com/vboard/s...d.php?t=587932 |
02-24-2017, 10:48 PM | #7 |
Registered User
Join Date: Nov 2015
Location: Bucks, PA
Posts: 100
|
Re: Extra Parts from Project
I will post some pictures for you tomorrow.
__________________
Daily Driver: 1972 K20 Project: 1967 Buick GS 340 |
02-28-2017, 08:53 PM | #8 |
Registered User
Join Date: Sep 2013
Location: North Tonawanda, NY
Posts: 236
|
Re: Extra Parts from Project
How much for the drivers side fender shipped to 14120? Thanks
|
09-22-2018, 05:22 PM | #9 |
Registered User
Join Date: Nov 2015
Location: Bucks, PA
Posts: 100
|
Re: Extra Parts from Project
Recently updated.
__________________
Daily Driver: 1972 K20 Project: 1967 Buick GS 340 |
09-22-2018, 08:25 PM | #10 |
Senior Member
Join Date: Nov 2012
Location: BY THE CAROLINA SEA
Posts: 922
|
Re: Extra Parts from Project
Pictures of the lap belts?
__________________
FRANKENTRUCK 1981 Chevrolet C10 Shortbed Stepside GRANDTRUCK 1968 Chevrolet C10 Stepside Longbed http://67-72chevytrucks.com/vboard/s...d.php?t=584617 PROJECT JIGSAW 1967 GMC C3500 GREAT WHITE 1986 Blazer M1009 454 engine w/700R4 transmission gas conversion |
09-22-2018, 10:57 PM | #11 |
Registered User
Join Date: Nov 2015
Location: Bucks, PA
Posts: 100
|
Re: Extra Parts from Project
I thought I had some on my phone but cannot find them. I will get some tomorrow morning.
__________________
Daily Driver: 1972 K20 Project: 1967 Buick GS 340 |
09-23-2018, 12:07 AM | #12 |
Registered User
Join Date: Nov 2017
Location: Lakewood, Ca
Posts: 143
|
Re: Extra Parts from Project
I am interested in the quadrajet carb? Can you provide the numbers on it?
|
09-23-2018, 10:28 AM | #13 |
Registered User
Join Date: Apr 2014
Location: Livingston, MT
Posts: 838
|
Re: Extra Parts from Project
2nd in line on the seat belts
Thanks Joe
__________________
Joe 1968 K20 1970 K20 Semper Fi |
09-23-2018, 12:02 PM | #14 |
Registered User
Join Date: Nov 2015
Location: Bucks, PA
Posts: 100
|
Re: Extra Parts from Project
Quadrajet.
top line of numbers appear to be 17080224 botton line is 0710 CZZ
__________________
Daily Driver: 1972 K20 Project: 1967 Buick GS 340 |
09-23-2018, 12:03 PM | #15 |
Registered User
Join Date: Nov 2015
Location: Bucks, PA
Posts: 100
|
Re: Extra Parts from Project
Seat Belts
__________________
Daily Driver: 1972 K20 Project: 1967 Buick GS 340 |
09-24-2018, 03:02 AM | #16 |
Registered User
Join Date: Nov 2017
Location: Lakewood, Ca
Posts: 143
|
Re: Extra Parts from Project
Thank you for the numbers. I’ll have to pass on it because I am looking for one manufactured in 1972.
|
09-24-2018, 08:44 AM | #17 |
Senior Member
Join Date: Nov 2012
Location: BY THE CAROLINA SEA
Posts: 922
|
Re: Extra Parts from Project
I will take the seatbelts pictured. PM sent.
__________________
FRANKENTRUCK 1981 Chevrolet C10 Shortbed Stepside GRANDTRUCK 1968 Chevrolet C10 Stepside Longbed http://67-72chevytrucks.com/vboard/s...d.php?t=584617 PROJECT JIGSAW 1967 GMC C3500 GREAT WHITE 1986 Blazer M1009 454 engine w/700R4 transmission gas conversion |
09-24-2018, 10:33 AM | #18 |
Registered User
Join Date: Jan 2017
Location: Panama City, FL
Posts: 120
|
Re: Extra Parts from Project
Wish you were closer, i need a radiator support
__________________
1972 K5 Blazer 350/350/PS/PB From GA but live in Panama City, FL |
09-24-2018, 07:46 PM | #19 |
Registered User
Join Date: Nov 2015
Location: Bucks, PA
Posts: 100
|
Re: Extra Parts from Project
Belts are sold to Highway by the Sea.
__________________
Daily Driver: 1972 K20 Project: 1967 Buick GS 340 |
09-24-2018, 07:50 PM | #20 |
Registered User
Join Date: Apr 2014
Location: Livingston, MT
Posts: 838
|
Re: Extra Parts from Project
Oh..well I guess I'm out then
__________________
Joe 1968 K20 1970 K20 Semper Fi |
09-27-2018, 06:30 PM | #21 |
Registered User
Join Date: Nov 2015
Location: Bucks, PA
Posts: 100
|
Re: Extra Parts from Project
ttt
__________________
Daily Driver: 1972 K20 Project: 1967 Buick GS 340 |
09-27-2018, 07:07 PM | #22 |
Senior Member
Join Date: Nov 2012
Location: BY THE CAROLINA SEA
Posts: 922
|
Re: Extra Parts from Project
Seat belts arrived today. LOVE them!!
__________________
FRANKENTRUCK 1981 Chevrolet C10 Shortbed Stepside GRANDTRUCK 1968 Chevrolet C10 Stepside Longbed http://67-72chevytrucks.com/vboard/s...d.php?t=584617 PROJECT JIGSAW 1967 GMC C3500 GREAT WHITE 1986 Blazer M1009 454 engine w/700R4 transmission gas conversion |
09-30-2018, 07:17 PM | #23 |
Registered User
Join Date: Nov 2015
Location: Bucks, PA
Posts: 100
|
Re: Extra Parts from Project
Glad I could help.
__________________
Daily Driver: 1972 K20 Project: 1967 Buick GS 340 |
12-24-2018, 12:52 PM | #24 |
Registered User
Join Date: Jan 2006
Location: omaha
Posts: 13
|
Re: Extra Parts from Project
Hi, I see this thread is old but was wondering if you still had the rear drum brakes and was the brake levers and brake struts were still there. If so I would be willing to buy these parts.
Thanks, |
12-24-2018, 05:32 PM | #25 |
Registered User
Join Date: Nov 2015
Location: Bucks, PA
Posts: 100
|
Re: Extra Parts from Project
Yes, I still have all the brake parts. Not sure what you mean by struts but I basically took all the parts off, unbolted the backing plate and put everything in a box.
__________________
Daily Driver: 1972 K20 Project: 1967 Buick GS 340 |
Bookmarks |
|
|