55.2-59 Cab Mount Brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kartch1 · 03-26-2021, 01:57 PM

Does anyone make the cab mount brackets? I'm starting to design a frame for my 56 and am only finding the cab mount kit and not the brackets themselves. Worse case I can cut the ones off my existing OEM frame but would rather start with some new ones.
Thanks!

MiraclePieCo · 03-26-2021, 09:34 PM

Sorry, I'm not familiar with TF cab mount brackets, but for my AD I just fabricated some out of 2x4 steel turned on end:

dsraven · 03-27-2021, 09:46 PM

I just gave away a set or I would get some dimensions for you. like miracle says, just fab a set from some rectangular tubing and carry on. easy peasy. check a few frame sites and see what they use......rect tubing. welded om or flanged and bolted on.
frame dimensions and lots of other pertinent info is in here. good to download a copy

https://www.trifive.com/d1/55-59Assy.pdf

**Rickysnickers** · 03-28-2021, 10:18 AM

MPC, did you do the welding there? Those are really nice!!!

MiraclePieCo · 03-28-2021, 04:56 PM

Quote:

Originally Posted by Rickysnickers

MPC, did you do the welding there? Those are really nice!!!

Yeah, sometimes I get lucky ;-)

NorCalGal · 03-28-2021, 02:21 PM

Page 33 of Art Morrison’s catalog https://cms.artmorrison.com/assets/8...64d9f?download

Kartch1 · 03-30-2021, 11:38 PM

Thanks everyone! This is very helpful. Will probably just fab some up.
Posted via Mobile Device

03-26-2021, 01:57 PM	#1
Kartch1 Registered User Join Date: Jun 2013 Location: Tucson, AZ Posts: 44	Cab Mount Brackets Does anyone make the cab mount brackets? I'm starting to design a frame for my 56 and am only finding the cab mount kit and not the brackets themselves. Worse case I can cut the ones off my existing OEM frame but would rather start with some new ones. Thanks!

03-26-2021, 09:34 PM	#2
MiraclePieCo Registered User Join Date: Sep 2014 Location: USA Posts: 2,249	Re: Cab Mount Brackets Sorry, I'm not familiar with TF cab mount brackets, but for my AD I just fabricated some out of 2x4 steel turned on end: Attached Images __________________ 1951 Chevy Panel Truck

03-27-2021, 09:46 PM	#3
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,207	Re: Cab Mount Brackets I just gave away a set or I would get some dimensions for you. like miracle says, just fab a set from some rectangular tubing and carry on. easy peasy. check a few frame sites and see what they use......rect tubing. welded om or flanged and bolted on. frame dimensions and lots of other pertinent info is in here. good to download a copy https://www.trifive.com/d1/55-59Assy.pdf

03-28-2021, 10:18 AM	#4
Rickysnickers Senior Member Join Date: Oct 2014 Location: Eagle, ID Posts: 3,028	Re: Cab Mount Brackets MPC, did you do the welding there? Those are really nice!!!

03-28-2021, 02:21 PM	#6
NorCalGal Registered User Join Date: Nov 2014 Location: Yuba City, CA. Posts: 678	Re: Cab Mount Brackets Page 33 of Art Morrison’s catalog https://cms.artmorrison.com/assets/8...64d9f?download __________________ Jan's 53

03-30-2021, 11:38 PM	#7
Kartch1 Registered User Join Date: Jun 2013 Location: Tucson, AZ Posts: 44	Re: Cab Mount Brackets Thanks everyone! This is very helpful. Will probably just fab some up. Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.