![]() |
|
![]() |
#1 |
Registered User
Join Date: May 2007
Location: San Francisco, Ca
Posts: 30
|
how do i fix this?
i removed the window and seems fine behind the seal. but has the same problem on the drivers side.
![]() |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Feb 2005
Location: milford,ne.
Posts: 51
|
![]()
cut that nasty brown out and weld in some new
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jun 2002
Location: Knoxville Tenn.
Posts: 3,058
|
Re: how do i fix this?
And use seam sealer.
__________________
56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer |
![]() |
![]() |
![]() |
#4 |
Official Site Guitar Shredder
Join Date: May 2006
Location: Oz
Posts: 3,955
|
Re: how do i fix this?
not only seam sealer,but when useing seam sealer use a good epoxy primer before hand. most seam sealers do not have very good adheasive to bare metal. i would fix the area. use a etch primer,and a good epoxy then seam seal. hope this helps
|
![]() |
![]() |
![]() |
Bookmarks |
|
|