![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Nov 2000
Location: Wheatfield IN, USA
Posts: 1,113
|
PS Inverted Flare Fittings - 5/8'' -11/16'' to AN
Man I've struggled for the last hour trying to find the right power steering box fittings - running hydroboost setup and I'm looking to run some ptfe black hose.
I am looking for the two ps box fittings - I believe they are 11/16''-18 IFM - Inverted Flare Male and a 5/8''-18 IFM. I can find the straight style fittings but those will not work due the clearance of the inner fender. What i need ( or believe I need) are 90 degree fittings that come off the box but I cannot for the life of me find them. Any help guys ? Picture is just because everyone likes pics ...............
__________________
1972 K5 Build - plans - LS3-6L80e-One Tons..... 1971 CREWMAX Build.....at body shop for couple more years ![]() |
![]() |
![]() |
![]() |
#2 | |
Always on the hunt...
![]() Join Date: Sep 2006
Location: Portland, OR.
Posts: 5,604
|
Re: PS Inverted Flare Fittings - 5/8'' -11/16'' to AN
Quote:
![]() .
__________________
***For any return/past customers & friends*** Before sending of any funds, please wait for a confirmed total and instructions for sending as our payment account info has been changed as of Jan. 2023. Thanks... |
|
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Dec 1999
Location: Southern California
Posts: 2,804
|
Re: PS Inverted Flare Fittings - 5/8'' -11/16'' to AN
Maybe something like this would work for you with the straight fittings? https://www.ebay.com/itm/28357639929...Cclp%3A2047675
Am using -6 hoses myself on all lines except res to pump return which is -12. From my initial observation the standard -6 90 degree hose ends will work out fine in my case.
__________________
Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746 |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Nov 2000
Location: Wheatfield IN, USA
Posts: 1,113
|
Re: PS Inverted Flare Fittings - 5/8'' -11/16'' to AN
Richard - I agree those would work if they had an inverted flare on the end however that is what I am struggling to find. I'm surprised there isn't more options for inverter flare fittings in a 90 degree .....
Classic Bowtie - nice work - I wonder if you could make you metal line just like you have it but once past the inner fender put an AN flare fitting on the end ??
__________________
1972 K5 Build - plans - LS3-6L80e-One Tons..... 1971 CREWMAX Build.....at body shop for couple more years ![]() |
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() Join Date: Dec 1999
Location: Southern California
Posts: 2,804
|
Re: PS Inverted Flare Fittings - 5/8'' -11/16'' to AN
Understand I said to use them with the straight inverted flare adapters. Just looking at pic posted, top of steering box looks 1.25-1.5" to top of frame. If those fittings threaded right into box the lines would not go over the frame. Bet the combo would get the -6 lines real close to top of frame.
__________________
Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746 |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Nov 2000
Location: Wheatfield IN, USA
Posts: 1,113
|
Re: PS Inverted Flare Fittings - 5/8'' -11/16'' to AN
Forgot I had this flaring kit - might try to make some up if I can find some 3/8'' tubing lying around
Any you are correct about 1-1/2'' plus a little ......
__________________
1972 K5 Build - plans - LS3-6L80e-One Tons..... 1971 CREWMAX Build.....at body shop for couple more years ![]() |
![]() |
![]() |
![]() |
#7 |
Senior Member
![]() Join Date: Mar 2015
Location: washington
Posts: 2,236
|
Re: PS Inverted Flare Fittings - 5/8'' -11/16'' to AN
I purchased the factory hose and cut the rubber part off. Then attached the new hose to the factory bent steel fitting. First attempt was using a crimping tool for air conditioning.
That one leaked, so I ended up using a hydraulic flair tool. The biggest issue was finding the sleeve that is crimped. I ended up making on the lathe. I believe the only reason the air-conditioning crimp didn't work was because I machined the ferrule a little too thick on the wall diameter. Yes, it was a PITA. Something I just couldn't find. Took me a week to get it leak free. |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Nov 2000
Location: Wheatfield IN, USA
Posts: 1,113
|
Re: PS Inverted Flare Fittings - 5/8'' -11/16'' to AN
Classic Bowtie - Can you make the hose with a 18Mx1.5 end on it for my hydroboost ? I really was wanting AN fittings and PTFE Black hose to match everything else but if rubber will work I'll settle for that. I would have you make the other
__________________
1972 K5 Build - plans - LS3-6L80e-One Tons..... 1971 CREWMAX Build.....at body shop for couple more years ![]() |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Nov 2000
Location: Wheatfield IN, USA
Posts: 1,113
|
Re: PS Inverted Flare Fittings - 5/8'' -11/16'' to AN
Any one by chance know the height on this - hate to spend the dollars if its too tall ....
__________________
1972 K5 Build - plans - LS3-6L80e-One Tons..... 1971 CREWMAX Build.....at body shop for couple more years ![]() |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Nov 2020
Location: Berlin, nj
Posts: 65
|
Re: PS Inverted Flare Fittings - 5/8'' -11/16'' to AN
Call these guys up. I bought all my stuff through them. It’s a real pain in the ass. But it’ll be worth it in the end.
They have bare hoses and ends. So you can make your own. That’s what I did. https://www.anplumbing.com/
__________________
Please be patient. I’m a ford guy. This is my 1st Chevy. Previous cars: 1973 mustang convertible 2003 mustang Mach 1 Now building resto mod 68 C10 step |
![]() |
![]() |
![]() |
#11 | |
Senior Member
![]() Join Date: Apr 2013
Location: Houston,Tx
Posts: 780
|
Re: PS Inverted Flare Fittings - 5/8'' -11/16'' to AN
Quote:
__________________
1966 C10 Mary 1972 C10 Cheyenne "Betty" https://67-72chevytrucks.com/vboard/...d.php?t=847364 1976 C35 Sierra Grande "Mr. Harvey" 1979 C10 Silverado "The BIG TEN" https://67-72chevytrucks.com/vboard/...d.php?t=841339 1982 C10 Silverado "Lucy" C10 Club Texas -HMIC |
|
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Nov 2020
Location: Berlin, nj
Posts: 65
|
Re: PS Inverted Flare Fittings - 5/8'' -11/16'' to AN
They are! I made a order of power steering hoses and return lines, they called me up and redid my order and saved me a lot of money.
__________________
Please be patient. I’m a ford guy. This is my 1st Chevy. Previous cars: 1973 mustang convertible 2003 mustang Mach 1 Now building resto mod 68 C10 step |
![]() |
![]() |
![]() |
Bookmarks |
|
|