Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
06-16-2005, 12:36 AM | #1 |
Registered User
Join Date: Nov 2002
Location: Dallas
Posts: 92
|
67 - 72 frames the same????
I know drums or disks and leafs or coils... but are the bare frames the same for all model years?
|
06-16-2005, 12:45 AM | #2 |
Senior Member
Join Date: Jan 2005
Location: CA
Posts: 5,796
|
67 frame rails are slightly wider up by the engine than the other years. There's less room for headers. I guess some 67 frames don't have a dimple needed for a power steering gearbox, although the 67 frame I had did have the dimple.
The holes for the radiator support mounts are smaller on a 67. The mounting holes for the fuel and brake lines are different on a 72 because there are three fuel lines instead of one. The exhaust hangers are different, and mounted at slightly different heights on a 72. Four of the eight front suspension crossmember mounting holes that go through the sides of the frame rails are in slightly different positions on a 72 (about 1/8" difference). That's all I can think of. I'm sure there are more differences, but none of them are a really big deal as far as interchangeability goes. |
Bookmarks |
|
|