Going to see Tim Christian at Huntsville SuperChevy this weekend...NEED PARTS??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 05-16-2007, 11:11 PM

Going to the Super Chevy Show in Huntsville on Friday. Going to see Tim Christian and his awesome trailer full of parts. Anybody need parts brought to them???

5150 · 05-17-2007, 01:06 PM

any of you middle Tennessee guys or Southern KY guys need anything?

LUV2XCLR8 · 05-17-2007, 10:32 PM

Ask him if he got my bucket seat back screws in yet?

5150 · 05-17-2007, 11:02 PM

You got it

A few 72's · 05-17-2007, 11:08 PM

Spent the day there he was about 95% set up when I left.
Me and Deb should be there about 9:30am Friday, Call me or Tim when you get close.

onetonk5 · 05-17-2007, 11:31 PM

See if he has a complete floor with braces for me.
Thanks
Mark

*Shane* · 05-17-2007, 11:37 PM

looking for two nice 67 front fenders ... NO rust, minimal dings/dents ... also need some nice front inner fenders. Let me know if you guys can help. I'm very very close by and would love to come over and hang out with you guys.

I posted basically the same thing in JQ-72's post ... if either can help, I would owe you guys one.

A few 72's · 05-17-2007, 11:46 PM

Mark, I know he does not have it with him, but may have one at the shop.

Shane, Can't help you on those, I did see a set at the JYard but they had rust in the front cups. Maybe J.Q. can help.

5150 · 05-18-2007, 10:56 PM

Just got back. Didn't see any 67 fenders or inner fenders in the swap meet area. There might be a more people coming in on Sat though.

onetonk5-Tim didn't have any floors there. Try calling him on Tuesday(closed on Mon) at his store and see if he has any.

*Shane* · 05-19-2007, 06:40 PM

Picked up two new TriPlus front fenders from Tim .... GREAT GUY! I highly recommend him to anyone looking for parts. We spent as much time chewing the fat as we did talking trucks.

Met A few 72's and chatted with him as well another nice guy! Looked for Josh (JQ72) but didn't run up on him.

A few 72's · 05-19-2007, 11:59 PM

Shane,
I know we come close to meeting up a few years ago at the Athens show, but it was good to put a face to the name.
I started a post on the "Swap Meets, Shows and Events" page, with info on this years Athens show, July 14th. Maybe we can meet up again.

*Shane* · 05-20-2007, 12:06 AM

For sure we can meet up, I'll be there. Hoping I can drive the Heap by then ... getting closer all the time.

Opened the boxes up hoping all the horror stories of banged up new sheetmetal were not true. Much to my relief, the fenders were PERFECT! Not a scratch, ding or blemish anywhere to be seen.

Again, dang nice to meet you and looking forward to seeing you at the Delphi show in July!

A few 72's · 05-20-2007, 12:23 AM

Tim has always loaded his trailer to avoid damage, and I can only think of one or two times that have ever seen any damaged product in the years that I have known him. (3+ years x 5 - 6 shows a year x ???? items)

5150 · 05-20-2007, 08:03 AM

Sorry, I missed meeting you Shane would have liked too.

truknut · 05-20-2007, 10:49 PM

Nice meeting you guys.. (Afew72s and Tim) Maybe one of these days I'll be able to buy some parts. How much is fenders and inner fenders going for on a 72? Maybe I'll see yellow69 again at the july show. Later, Jeff.

5150 · 05-22-2007, 11:54 PM

Not going to be able to make that one Jeff. I'm scheduled for an Alaskan cruise with the in-laws. Kind of looking forward to it, but I'm sure they will ruin it.

05-16-2007, 11:11 PM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Going to see Tim Christian at Huntsville SuperChevy this weekend...NEED PARTS??? Going to the Super Chevy Show in Huntsville on Friday. Going to see Tim Christian and his awesome trailer full of parts. Anybody need parts brought to them??? __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

05-17-2007, 01:06 PM	#2
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Going to see Tim Christian at Huntsville SuperChevy this weekend...NEED PARTS??? any of you middle Tennessee guys or Southern KY guys need anything? __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

05-17-2007, 10:32 PM	#3
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Re: Going to see Tim Christian at Huntsville SuperChevy this weekend...NEED PARTS??? Ask him if he got my bucket seat back screws in yet? __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-17-2007, 11:02 PM	#4
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Going to see Tim Christian at Huntsville SuperChevy this weekend...NEED PARTS??? You got it __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

05-17-2007, 11:08 PM	#5
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 705	Re: Going to see Tim Christian at Huntsville SuperChevy this weekend...NEED PARTS??? Spent the day there he was about 95% set up when I left. Me and Deb should be there about 9:30am Friday, Call me or Tim when you get close. __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s

05-17-2007, 11:31 PM	#6
onetonk5 Cereal Killer Join Date: Jan 2006 Location: Montgomery, Alabama Posts: 639	Re: Going to see Tim Christian at Huntsville SuperChevy this weekend...NEED PARTS??? See if he has a complete floor with braces for me. Thanks Mark __________________ If I dont do it....somebody else will.

05-17-2007, 11:37 PM	#7
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Going to see Tim Christian at Huntsville SuperChevy this weekend...NEED PARTS??? looking for two nice 67 front fenders ... NO rust, minimal dings/dents ... also need some nice front inner fenders. Let me know if you guys can help. I'm very very close by and would love to come over and hang out with you guys. I posted basically the same thing in JQ-72's post ... if either can help, I would owe you guys one.

05-17-2007, 11:46 PM	#8
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 705	Re: Going to see Tim Christian at Huntsville SuperChevy this weekend...NEED PARTS??? Mark, I know he does not have it with him, but may have one at the shop. Shane, Can't help you on those, I did see a set at the JYard but they had rust in the front cups. Maybe J.Q. can help. __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s

05-18-2007, 10:56 PM	#9
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Going to see Tim Christian at Huntsville SuperChevy this weekend...NEED PARTS??? Just got back. Didn't see any 67 fenders or inner fenders in the swap meet area. There might be a more people coming in on Sat though. onetonk5-Tim didn't have any floors there. Try calling him on Tuesday(closed on Mon) at his store and see if he has any. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4 Last edited by 5150; 05-18-2007 at 10:58 PM.

05-19-2007, 06:40 PM	#10
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Going to see Tim Christian at Huntsville SuperChevy this weekend...NEED PARTS??? Picked up two new TriPlus front fenders from Tim .... GREAT GUY! I highly recommend him to anyone looking for parts. We spent as much time chewing the fat as we did talking trucks. Met A few 72's and chatted with him as well another nice guy! Looked for Josh (JQ72) but didn't run up on him.

05-19-2007, 11:59 PM	#11
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 705	Re: Going to see Tim Christian at Huntsville SuperChevy this weekend...NEED PARTS??? Shane, I know we come close to meeting up a few years ago at the Athens show, but it was good to put a face to the name. I started a post on the "Swap Meets, Shows and Events" page, with info on this years Athens show, July 14th. Maybe we can meet up again. __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s

05-20-2007, 12:06 AM	#12
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Going to see Tim Christian at Huntsville SuperChevy this weekend...NEED PARTS??? For sure we can meet up, I'll be there. Hoping I can drive the Heap by then ... getting closer all the time. Opened the boxes up hoping all the horror stories of banged up new sheetmetal were not true. Much to my relief, the fenders were PERFECT! Not a scratch, ding or blemish anywhere to be seen. Again, dang nice to meet you and looking forward to seeing you at the Delphi show in July!

05-20-2007, 12:23 AM	#13
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 705	Re: Going to see Tim Christian at Huntsville SuperChevy this weekend...NEED PARTS??? Tim has always loaded his trailer to avoid damage, and I can only think of one or two times that have ever seen any damaged product in the years that I have known him. (3+ years x 5 - 6 shows a year x ???? items) __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s

05-20-2007, 08:03 AM	#14
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Going to see Tim Christian at Huntsville SuperChevy this weekend...NEED PARTS??? Sorry, I missed meeting you Shane would have liked too. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

05-20-2007, 10:49 PM	#15
truknut Registered User Join Date: Oct 2005 Location: Florence, AL (NW Alabama) Posts: 309	Re: Going to see Tim Christian at Huntsville SuperChevy this weekend...NEED PARTS??? Nice meeting you guys.. (Afew72s and Tim) Maybe one of these days I'll be able to buy some parts. How much is fenders and inner fenders going for on a 72? Maybe I'll see yellow69 again at the july show. Later, Jeff. __________________ 1990 Chevy Silverado (My DD) 1978 Chevy Bonanza LWB (My LWB to SWB 1 day project) 2015 Hyundai Sonata (Wife's DD)



Register or Log In To remove these advertisements.

05-22-2007, 11:54 PM	#16
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Going to see Tim Christian at Huntsville SuperChevy this weekend...NEED PARTS??? Not going to be able to make that one Jeff. I'm scheduled for an Alaskan cruise with the in-laws. Kind of looking forward to it, but I'm sure they will ruin it. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

Register or Log In To remove these advertisements.