Disc/suspension question... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bjohn3x · 03-19-2005, 10:42 PM

Can someone please tell me if you can use the 69 1/2 ton DRUM lower control arm with a '72 disc spindle? If so, is there any disc-specific hardware I need?

69 longhorn · 03-19-2005, 10:49 PM

Yes you can.......go for the yr of the spindle for the proper balljoints, & note that you may need to grind the steer stops on the spindle , to correct the turning radius(stops are a tad different on the a arms). .......

L

03-19-2005, 10:42 PM	#1
bjohn3x Registered User Join Date: Dec 2003 Location: Beaverton, OR Posts: 49	Disc/suspension question... Can someone please tell me if you can use the 69 1/2 ton DRUM lower control arm with a '72 disc spindle? If so, is there any disc-specific hardware I need?

03-19-2005, 10:49 PM	#2
69 longhorn Registered User Join Date: Aug 2001 Location: rock island,il,usa Posts: 5,382	Yes you can.......go for the yr of the spindle for the proper balljoints, & note that you may need to grind the steer stops on the spindle , to correct the turning radius(stops are a tad different on the a arms). ....... L __________________ http://community.webshots.com/user/hotrodhorn



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.