SWB Fleet bed + 2 Cabs FS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C10Squared · 10-22-2003, 09:44 PM

FYI, I may work trades for stuff that I need like a rust free radiator support, rust free fenders, etc...

Cab #1. 1969 cab, needs corners, rockers, pans, and some cowl work. I'm not a body man, so I decided to swap cabs.
$100

Bed: Came off my truck as well. Sides look good, but the floor needs patch work as well as one wheel well. The cab panel also has a place that needs to be welded up.
$200
doesn't include tailgate ($50 more)

Both of the above are off my truck seen here:

Cab #2. 1970 cab, needs one corner and maybe a rocker on one side. Floors look good. The bad part is that it is off a wreck and the tranny tunnel is bent a bit causing a gap where the panels meet in the floor and the rear corner of the cab has some small dents where the bed hit it. This truck was restored before some thugs stole it and hit a tree. It sat for a year and a half before I bought it. There is also a small rust hole by the wiper motor.
$200 obo

LOTS of pics of all three here:
PARTS PICS

**BOSS** · 10-22-2003, 09:57 PM

if only you where closer,theres NO way i would be able to pick it up.Good luck sounds like some good prices.............

Als454 · 10-22-2003, 10:51 PM

I am very interested in the bed. Can you Email more information and possibly pictures? I am willing to drive to pick it up if I can use it.

slim shaney · 10-22-2003, 11:05 PM

if willing to sell parts off of bed let me know thanks

*Shane* · 10-22-2003, 11:40 PM

I have a rust free radiator support and a nice 69-70 model grille I would be willing to trade for the bed. I can have pics for ya this weekend.

Let me know if you are interested in doing some trading. We could arange some sort of meeting ... maybe halfway.

I got second dibs behind Als454 .... he was first.

zombie69 · 10-23-2003, 12:07 AM

i need a straight 69 grill

C10Squared · 10-23-2003, 12:05 PM

Guys, I PM'd Als454 and will get back with you if he doesn't want it.
Shane, gimme a price on the radiator support. I may be interested even if you don't get the bed.

Als454 · 10-23-2003, 09:51 PM

I PM'd you about the bed!!!!!!

C10Squared · 10-24-2003, 12:29 PM

Guys, JaquesDean stopped by this AM and dropped off my new bed floor, fenders, etc... and decided to take the bed off my hands. I'm sure he'll sell it if someone wants it from him. I just traded him for some of the stuff I needed.
Sorry,
Clay

Als454 · 10-24-2003, 12:37 PM

I PM'd Jaquesdean. I want this bed. I hope it is still available. At least it is now working it's way closer.

Als454 · 10-25-2003, 10:58 AM

TTT

10-22-2003, 10:51 PM	#3
Als454 Senior Member Join Date: Jan 2002 Location: Vienna, Ohio, USA Posts: 259	Truck bed I am very interested in the bed. Can you Email more information and possibly pictures? I am willing to drive to pick it up if I can use it. __________________ 72 Chevy A/C P/B P/S Tilt 454 Engine 400 TCI Trans C30 Frame C10 Suspension Short Wheel Base (Dually)

10-23-2003, 12:07 AM	#6
zombie69 Registered User Join Date: Sep 2003 Location: memphis Posts: 38	i need a straight 69 grill __________________ 1969 chevy c/10 lwb 250 six 3 on the floor

10-23-2003, 12:05 PM	#7
C10Squared Registered User Join Date: Sep 2003 Location: W. Atlanta, GA Posts: 180	Guys, I PM'd Als454 and will get back with you if he doesn't want it. Shane, gimme a price on the radiator support. I may be interested even if you don't get the bed. __________________ '72 Chevy Custom/10 Shortbed '77 2wd K5 “Halfbaked” '93 Indy pace truck ‘70 GMC Jimmy ‘76 K5 Blazer Follow me on instagram @C10squared

10-23-2003, 09:51 PM	#8
Als454 Senior Member Join Date: Jan 2002 Location: Vienna, Ohio, USA Posts: 259	I PM'd you about the bed!!!!!! __________________ 72 Chevy A/C P/B P/S Tilt 454 Engine 400 TCI Trans C30 Frame C10 Suspension Short Wheel Base (Dually)

10-24-2003, 12:29 PM	#9
C10Squared Registered User Join Date: Sep 2003 Location: W. Atlanta, GA Posts: 180	Guys, JaquesDean stopped by this AM and dropped off my new bed floor, fenders, etc... and decided to take the bed off my hands. I'm sure he'll sell it if someone wants it from him. I just traded him for some of the stuff I needed. Sorry, Clay __________________ '72 Chevy Custom/10 Shortbed '77 2wd K5 “Halfbaked” '93 Indy pace truck ‘70 GMC Jimmy ‘76 K5 Blazer Follow me on instagram @C10squared

10-22-2003, 09:44 PM	#1
C10Squared Registered User Join Date: Sep 2003 Location: W. Atlanta, GA Posts: 180	SWB Fleet bed + 2 Cabs FS FYI, I may work trades for stuff that I need like a rust free radiator support, rust free fenders, etc... Cab #1. 1969 cab, needs corners, rockers, pans, and some cowl work. I'm not a body man, so I decided to swap cabs. $100 Bed: Came off my truck as well. Sides look good, but the floor needs patch work as well as one wheel well. The cab panel also has a place that needs to be welded up. $200 doesn't include tailgate ($50 more) Both of the above are off my truck seen here: Cab #2. 1970 cab, needs one corner and maybe a rocker on one side. Floors look good. The bad part is that it is off a wreck and the tranny tunnel is bent a bit causing a gap where the panels meet in the floor and the rear corner of the cab has some small dents where the bed hit it. This truck was restored before some thugs stole it and hit a tree. It sat for a year and a half before I bought it. There is also a small rust hole by the wiper motor. $200 obo LOTS of pics of all three here: PARTS PICS __________________ '72 Chevy Custom/10 Shortbed '77 2wd K5 “Halfbaked” '93 Indy pace truck ‘70 GMC Jimmy ‘76 K5 Blazer Follow me on instagram @C10squared Last edited by C10Squared; 10-23-2003 at 12:06 PM.

10-22-2003, 09:57 PM	#2
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,893	if only you where closer,theres NO way i would be able to pick it up.Good luck sounds like some good prices............. __________________ Support our site Norwood Survivor

10-22-2003, 11:05 PM	#4
slim shaney Registered User Join Date: Aug 2003 Location: magazine arkansas Posts: 14	if willing to sell parts off of bed let me know thanks

10-22-2003, 11:40 PM	#5
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	I have a rust free radiator support and a nice 69-70 model grille I would be willing to trade for the bed. I can have pics for ya this weekend. Let me know if you are interested in doing some trading. We could arange some sort of meeting ... maybe halfway. I got second dibs behind Als454 .... he was first.

10-24-2003, 12:37 PM	#10
Als454 Senior Member Join Date: Jan 2002 Location: Vienna, Ohio, USA Posts: 259	I PM'd Jaquesdean. I want this bed. I hope it is still available. At least it is now working it's way closer. __________________ 72 Chevy A/C P/B P/S Tilt 454 Engine 400 TCI Trans C30 Frame C10 Suspension Short Wheel Base (Dually)

10-25-2003, 10:58 AM	#11
Als454 Senior Member Join Date: Jan 2002 Location: Vienna, Ohio, USA Posts: 259	TTT __________________ 72 Chevy A/C P/B P/S Tilt 454 Engine 400 TCI Trans C30 Frame C10 Suspension Short Wheel Base (Dually)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.