Found this, thoughts? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*mickeymouse* · 12-18-2009, 10:18 PM

http://nh.craigslist.org/cto/1512484708.html

I will be stationed in Brunswick, ME shortly. Found this, any thoughts?

It would be easy to pick up in Jan.

white 67 · 12-18-2009, 10:30 PM

I was in brunswick the last 5 years. I would just say look it over really good rust is really bad up there.

*mickeymouse* · 12-18-2009, 10:38 PM

Quote:

Originally Posted by white 67

I was in brunswick the last 5 years. I would just say look it over really good rust is really bad up there.

Thanks, the ad says it's rust free.

**wancosc356** · 12-18-2009, 11:22 PM

Quote:

Originally Posted by mickeymouse

Thanks, the ad says it's rust free.

Looks like a nice project....but alot of money for a basket case IMO. Also, just because the owner says its rust free doesn't mean that its true. Check it out very thoroughly.

rsavage · 12-18-2009, 11:15 PM

Lots of nice parts but still a very large project that will require big dollars and time. Seems too high in price IMO.

*mickeymouse* · 12-18-2009, 11:32 PM

Quote:

Originally Posted by rsavage

Lots of nice parts but still a very large project that will require big dollars and time. Seems too high in price IMO.

What do you think it needs?

I talked with the guy, it comes with a wiring harness, interior and drive shafts.

He also said he used to be on this board and the guy that did the body work's still here, from VT.

unclewatts · 12-18-2009, 11:50 PM

He says the front end is damaged but is not honest enough to show it. It's also incomplete and in primer. $10,000? I don't think so...

*mickeymouse* · 12-19-2009, 12:10 PM

He sent me a link to the body work.

http://s639.photobucket.com/albums/u...20Tub/?start=0

What do y'all think I should offer?

dan42 · 12-19-2009, 12:33 PM

For me, I would make sure I have a shop to work on it in, and lots of time. After that, considering it needs a new front clip, and if you really want it, I would offer him $5,000 and give him your number, because if he's really burned out on projects like he says he is, he'll eventually consider your offer.

cdowns · 12-19-2009, 01:07 PM

Toooo much money

**fine69** · 12-19-2009, 01:55 PM

This Blazer pic is one i hauled a few months ago.

It sold for like $13K, give or take.

Almost a flawless blazer.

Deals already done are out there.

Why would you pay that much for peices? Hold out.

292farmer · 12-19-2009, 10:37 PM

this in my opinion is a better buy at least its a complete running vehicle and cheaper if i had the money id buy it maybe talk him down a little hope this helps if not u now know what i like lol plus u could probably make it 4wd for and still b under 10k and will probably easier and faster then trying to piece that truck together he may have major components buts its the little stuff that will nickle and dime that 10k rig up to 11-12k like bolts fastners plus replacing a hood and fenders new would be 700-900$? 2-300 used ontop of the 10k price just my 2 cents http://nh.craigslist.org/cto/1517921256.html

mr48chev · 12-19-2009, 01:49 PM

Way too much money for a crawler that is going to get banged up some time in it's life if it gets used. Way too many spendy parts to have to contend with if you intend to put it back to closer to stock/streetable.
Dollar wise it looks like he has a lot more then the asking price tied up in it but as the others said I'd make an offer and let him counteroffer if I wanted it.

I agree with dan42 in that if you don't have a shop lined up to work on it in it isn't a project you want to tackle and I have a feeling it won't fit in most attached garages on most houses.

67-C10 · 12-20-2009, 12:45 AM

i'm with Fine69, there are plenty vehicles out there done. and plenty of people that need to get rid of them for alot less than 10k. That big block truck has been on craigslist for bout 3 months already and priced the same. I've seen a few blazers on CL in new england runnning driving and in decent shape going for around 6k-8k. Its the middle of the winter just keep looking and you'll find a good deal. Just remeber that damn murphy's law, whatever you buy you'll find a better deal down the road.

**fine69** · 12-20-2009, 12:53 AM

Lots of great vehicles in the TRUCKS FOR SALE section here.

dirtyd_nd · 12-20-2009, 03:23 AM

Mickey-If you are heading up there now? All I can say is take a liking to the AWV's that are about to be sent up there!!!! (insert the most evil grin you have! I'm at VP-30) As far as the truck, check it out and make an offer. Also look and see if it is worth it to take a little "house hunting leave" and take a trip to pick something up. Hope it works out for ya.
Dale

*mickeymouse* · 12-21-2009, 02:23 PM

Thanks guys. He's throwing in repop sheet metal for the front.

I am interested enough to go look.

It also has a complete interior. I think I'd sell of the hard core stuff and put it back to stock.

Could have far less into it. BTW, I can do all the work required. It's fun to do it.

edit: yes, I am heading up there, due there on 14Jan2010.

12-18-2009, 10:18 PM	#1
mickeymouse Account Suspended Join Date: Nov 2005 Location: Where ever the Navy sends me. Posts: 116	Found this, thoughts? http://nh.craigslist.org/cto/1512484708.html I will be stationed in Brunswick, ME shortly. Found this, any thoughts? It would be easy to pick up in Jan.

12-18-2009, 10:30 PM	#2
white 67 Registered User Join Date: Oct 2009 Location: coupeville ,washington Posts: 348	Re: Found this, thoughts? I was in brunswick the last 5 years. I would just say look it over really good rust is really bad up there.

12-18-2009, 11:15 PM	#5
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: Found this, thoughts? Lots of nice parts but still a very large project that will require big dollars and time. Seems too high in price IMO. __________________ 1961 C1 Corvette 1959 El Camino 350 TPI, 9" 4 w disc 69 Blazer K5 - sold July '20 2021 Durango RT 5.7

12-18-2009, 11:50 PM	#7
unclewatts 70 Chevrolet=Obsession Join Date: Jun 2009 Location: nice ca Posts: 1,067	Re: Found this, thoughts? He says the front end is damaged but is not honest enough to show it. It's also incomplete and in primer. $10,000? I don't think so... __________________ I'm Just like my truck. Old, Ugly and Grouchy. Except my truck starts easily in the morning and doesn't smoke! IT'S NOT EASY BEING GREEN! -Kermit the frog 1970 Chevrolet C-10 Longbed Stepside : 350, Muncie M20, 3.08 GM corp. positraction Forest green exterior/light green interior(Where all my money goes) 1996 Toyota Corolla (Parts runner)

12-19-2009, 12:10 PM	#8
mickeymouse Account Suspended Join Date: Nov 2005 Location: Where ever the Navy sends me. Posts: 116	Re: Found this, thoughts? He sent me a link to the body work. http://s639.photobucket.com/albums/u...20Tub/?start=0 What do y'all think I should offer?

12-19-2009, 12:33 PM	#9
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: Found this, thoughts? For me, I would make sure I have a shop to work on it in, and lots of time. After that, considering it needs a new front clip, and if you really want it, I would offer him $5,000 and give him your number, because if he's really burned out on projects like he says he is, he'll eventually consider your offer. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

12-19-2009, 01:07 PM	#10
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Found this, thoughts? Toooo much money __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

12-19-2009, 01:55 PM	#11
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	Re: Found this, thoughts? This Blazer pic is one i hauled a few months ago. It sold for like $13K, give or take. Almost a flawless blazer. Deals already done are out there. Why would you pay that much for peices? Hold out. Attached Images __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

12-19-2009, 10:37 PM	#12
292farmer Registered User Join Date: Nov 2009 Location: stoddard nh Posts: 693	Re: Found this, thoughts? this in my opinion is a better buy at least its a complete running vehicle and cheaper if i had the money id buy it maybe talk him down a little hope this helps if not u now know what i like lol plus u could probably make it 4wd for and still b under 10k and will probably easier and faster then trying to piece that truck together he may have major components buts its the little stuff that will nickle and dime that 10k rig up to 11-12k like bolts fastners plus replacing a hood and fenders new would be 700-900$? 2-300 used ontop of the 10k price just my 2 cents http://nh.craigslist.org/cto/1517921256.html Last edited by 292farmer; 12-19-2009 at 10:42 PM.

12-19-2009, 01:49 PM	#13
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,433	Re: Found this, thoughts? Way too much money for a crawler that is going to get banged up some time in it's life if it gets used. Way too many spendy parts to have to contend with if you intend to put it back to closer to stock/streetable. Dollar wise it looks like he has a lot more then the asking price tied up in it but as the others said I'd make an offer and let him counteroffer if I wanted it. I agree with dan42 in that if you don't have a shop lined up to work on it in it isn't a project you want to tackle and I have a feeling it won't fit in most attached garages on most houses.

12-20-2009, 12:45 AM	#14
67-C10 Registered User Join Date: Jul 2008 Location: Taunton, MA Posts: 224	Re: Found this, thoughts? i'm with Fine69, there are plenty vehicles out there done. and plenty of people that need to get rid of them for alot less than 10k. That big block truck has been on craigslist for bout 3 months already and priced the same. I've seen a few blazers on CL in new england runnning driving and in decent shape going for around 6k-8k. Its the middle of the winter just keep looking and you'll find a good deal. Just remeber that damn murphy's law, whatever you buy you'll find a better deal down the road. __________________ 67 C10 2wd Stepside (to be fleetside), Factory AC truck, Big Back Window, just got a 6.0/6l90e to jam in it now..... Needed: paint and lots of it. and i'm sure lots more misc. parts. Project 67 short step Build Thread 01 Sierra Crew 6.0 2015 Ford F150 Work gave me truck i really wouldn't buy a ford.

12-20-2009, 12:53 AM	#15
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	Re: Found this, thoughts? Lots of great vehicles in the TRUCKS FOR SALE section here. __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

12-20-2009, 03:23 AM	#16
dirtyd_nd Registered User Join Date: Jul 2006 Location: JACKSONVILLE, FL Posts: 112	Re: Found this, thoughts? Mickey-If you are heading up there now? All I can say is take a liking to the AWV's that are about to be sent up there!!!! (insert the most evil grin you have! I'm at VP-30) As far as the truck, check it out and make an offer. Also look and see if it is worth it to take a little "house hunting leave" and take a trip to pick something up. Hope it works out for ya. Dale

12-21-2009, 02:23 PM	#17
mickeymouse Account Suspended Join Date: Nov 2005 Location: Where ever the Navy sends me. Posts: 116	Re: Found this, thoughts? Thanks guys. He's throwing in repop sheet metal for the front. I am interested enough to go look. It also has a complete interior. I think I'd sell of the hard core stuff and put it back to stock. Could have far less into it. BTW, I can do all the work required. It's fun to do it. edit: yes, I am heading up there, due there on 14Jan2010. Last edited by mickeymouse; 12-21-2009 at 02:24 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.