CO Cab parts and cuts

[402Bowtie]

Cab cuts for sale.

All prices include shipping unless otherwise stated.

Price format is Fee-less payment method / PayPal Goods and Services method.


4) 69-72 Parking Brake Firewall holes and stamping - Excellent condition. $55/$75
5) Lower, outer cowl panel LH side - Solid. $55/$75
6) Lower, outer cowl panel RH side - Solid. $55/$75
7) Rear panel including driver side B pillar. One small ding in the middle section. Also some damage near/above the gas tank hole. $150 fee-less ($203 Paypal G&S) for the entire panel (no shipping). I could also cut the B pillar off separately. $75 plus shipping (fee-less) for B pillar.
8) Engine Firewall area (with green paint) - $20 plus shipping (fee-less) for any cut or all of the sheetmetal. Paypal G&S extra.
9) Rear passenger-side pillar. See post #8 for info and pics. $25 plus shipping (fee-less). Paypal G&S extra.
10) Courtesy light cab bumps - I think only some of the later year cabs had this stamped into the cab. So if you want to install courtesy lights on an older cab as GM did, you will need to add these to your cab. See post #9 for pics. $35/$48

Shipping outside CONUS extra.

Items that are sold or no longer available:
1) A/C Dash - no longer available.
2) A/C Firewall Box Section - Some heavy surface rust in one area as pictured. $75 shipped
3) Wiper Motor Mount cutout - Excellent condition. $65/$88

[402Bowtie]

#2 and #3

[402Bowtie]

#4, #5, #6

[402Bowtie]

#7

[402Bowtie]

#8

[402Bowtie]

Adding the passenger-side rear pillar. The cross-hatched area is dented. $30 for any portion plus shipping.

[402Bowtie]

Adding these courtesy light bumps to the thread. Great condition--surface rust only on the back side. Yellow ones are for sale. Pics of green ones for reference.

[greenbooger1972]

Take #8. I am also looking for the passenger toeboard. The whole right side from mid firewall to floor.
Posted via Mobile Device

[greenbooger1972]

Originally Posted by greenbooger1972

Take #8. I am also looking for the passenger toeboard. The whole right side from mid firewall to floor.
Posted via Mobile Device

Posted via Mobile Device

[greenbooger1972]

Originally Posted by greenbooger1972

Posted via Mobile Device

This is what I am looking for. I had it and it was accident ly thrown out!
Posted via Mobile Device

[greenbooger1972]

Originally Posted by greenbooger1972

Posted via Mobile Device

This is what I am looking for. I had it and it was accident ly thrown out!
Posted via Mobile Device

[402Bowtie]

Originally Posted by greenbooger1972

Take #8. I am also looking for the passenger toeboard. The whole right side from mid firewall to floor.
Posted via Mobile Device

A few more pics just to make sure you know exactly what you will receive. The previous owner wasn't exactly surgical with his cuts. I will remove the insulation and attached parts before shipping.

[greenbooger1972]

yes looks fine. send me the total

[402Bowtie]

Originally Posted by greenbooger1972

yes looks fine. send me the total

pm sent with the total.

[402Bowtie]

#8 is the center section of firewall. I have that.

Do you also want piece #2 for the area you have circled?

I don't have the passenger toeboard any more...

[402Bowtie]

New prices

[402Bowtie]

#3 sold. Ttt

[402Bowtie]

Upcoming road trip from Denver to Columbus, OH. Could meet along I-70.

[raggedjim]

If you made a deal with Oskar, how much for this cut from the rear panel? Shipped to 42071. Could be cut in half at dotted line for shipping.

[402Bowtie]

Originally Posted by raggedjim

If you made a deal with Oskar, how much for this cut from the rear panel? Shipped to 42071. Could be cut in half at dotted line for shipping.

I'm hoping to keep that piece whole for the moment at least...thought it might be valuable for a motorhome repair.

That said, I think I have your outlined piece from another cab. Does it have to be those two rectangles circled, or could it be any two rectangles? Looks like that outside rectangle is different from the others... I'll see what I have.

[raggedjim]

Originally Posted by 402Bowtie

I'm hoping to keep that piece whole for the moment at least...thought it might be valuable for a motorhome repair.

That said, I think I have your outlined piece from another cab. Does it have to be those two rectangles circled, or could it be any two rectangles? Looks like that outside rectangle is different from the others... I'll see what I have.

Actually I could use any two, doesn't have to be the outside one.

Thanks

[402Bowtie]

Originally Posted by raggedjim

Actually I could use any two, doesn't have to be the outside one.

Thanks

Here is what I have. They aren't full squares (obviously). My cut wasn't very straight, but at minimum the height measures 16.75 inches on each piece.

The 2-square piece has a few dings in one area on the center ridge. $25 plus shipping.

The 3-square piece is straight. It has a little undercoating in the one corner. $40 plus shipping.

I can cut either piece how you want.

[raggedjim]

2 square should do. I'll send you pm.

[raggedjim]

John, you should have Paypal.

Thanks, Rg

[402Bowtie]

Ttt