Need Bench seat floor brackets... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Cochise · 10-07-2007, 06:01 PM

for a '70 C-10. I bought a "new" seat that was welded to another cab, so I used the brackets from the '89 chevy model's bench seat to bolt the "new" seat in, but the '89 model brackets make the seat too tall, and the holes are too close to each other in the floor. If the above post makes no sense I apologize, I no explain good.

**jamie72** · 10-07-2007, 06:09 PM

i got a set of bench seat brackets, 25.00 and shipping

Cochise · 10-07-2007, 08:21 PM

Have any pictures so I can make sure they'll work?

**jamie72** · 10-07-2007, 08:27 PM

sorry no pics

Cochise · 10-07-2007, 09:30 PM

Can ya get some?

teeitup · 10-08-2007, 07:40 PM

Here is a set I have. Thanks Randy

Cochise · 10-08-2007, 09:49 PM

It's dark now, so I can't check, but I don't think I have that. But maybe it's what I need. Like i said, I'll go check tomorrow.

Cochise · 10-08-2007, 09:59 PM

Mine had a single blade with a bolt hole at each end of it instead of the 2 on your picture. Maybe my seat is of a later model. Would it help if I posted a picture of my seat?

10-07-2007, 06:01 PM	#1
Cochise Junior Member Join Date: Apr 2006 Location: Rogers, AR Posts: 298	Need Bench seat floor brackets... for a '70 C-10. I bought a "new" seat that was welded to another cab, so I used the brackets from the '89 chevy model's bench seat to bolt the "new" seat in, but the '89 model brackets make the seat too tall, and the holes are too close to each other in the floor. If the above post makes no sense I apologize, I no explain good.

10-07-2007, 06:09 PM	#2
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,839	Re: Need Bench seat floor brackets... i got a set of bench seat brackets, 25.00 and shipping __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

10-07-2007, 08:21 PM	#3
Cochise Junior Member Join Date: Apr 2006 Location: Rogers, AR Posts: 298	Re: Need Bench seat floor brackets... Have any pictures so I can make sure they'll work?

10-07-2007, 08:27 PM	#4
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,839	Re: Need Bench seat floor brackets... sorry no pics __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

10-07-2007, 09:30 PM	#5
Cochise Junior Member Join Date: Apr 2006 Location: Rogers, AR Posts: 298	Re: Need Bench seat floor brackets... Can ya get some?

10-08-2007, 07:40 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Need Bench seat floor brackets... Here is a set I have. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-08-2007, 09:49 PM	#7
Cochise Junior Member Join Date: Apr 2006 Location: Rogers, AR Posts: 298	Re: Need Bench seat floor brackets... It's dark now, so I can't check, but I don't think I have that. But maybe it's what I need. Like i said, I'll go check tomorrow.

10-08-2007, 09:59 PM	#8
Cochise Junior Member Join Date: Apr 2006 Location: Rogers, AR Posts: 298	Re: Need Bench seat floor brackets... Mine had a single blade with a bolt hole at each end of it instead of the 2 on your picture. Maybe my seat is of a later model. Would it help if I posted a picture of my seat?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.