60/40 Bench Seat Price - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dave2953 · 02-21-2007, 02:58 PM

A neighbor of mine has a 91 or 92 Chevy 1500 that he is going to junk. The 60/40 bench seat in it is in great condition (no tears, rips, not faded, etc) He said he would take $150 for it. Is this about the going rate, or does it seem high? I can try and get a pic if it will help. Thanks in advance for your input.

bobthecop · 02-21-2007, 03:01 PM

Leather or cloth, leather ones around here go for $500.00

dave2953 · 02-21-2007, 03:09 PM

It's cloth.

Blue'72 · 02-21-2007, 03:20 PM

I'd steer clear of that seat if I were you! Just forget about it...
Where exactly is it again? I'll be right over!

That's not a bad deal if it's in great shape and a good color for you. I've had three trucks that I bought that seat for and got a smokin' deal each time, but they're hard to come by. I think each time I bought one it was $75, but if I found a real nice one now I wouldn't hesitate upping the ante ..

**John Fabris** · 02-21-2007, 03:10 PM

I have brought two sets of those seats, one for $100, other for $150, so it seems pretty fair to me.

dave2953 · 02-21-2007, 03:17 PM

I think I'll get it from him. I got a quote to have my factory bench recovered and the broken springs repaired and they wanted $225. I imagine this seat will be more comfortable than my repaired original. Don't the 60/40 seats have 4 brackets instead of two? Guess I'll have to drill some holes if I get it.

Blue'72 · 02-21-2007, 03:36 PM

The driver's side sits level on the floor and you'll need to drill out 3 of the holes for it if I remember right. You'll need to add an 1 1/2" spacer for the inside mount on the pass side. I bolted a piece of 2X8 to the floor and then bolted the seat mount to it.

**SactoJim** · 02-21-2007, 04:52 PM

I've had a late 80's 60/40 in my truck for years. It's sits in the truck well and is not too cushy or firm. worth the $$ in my opinion.

meathead95 · 02-21-2007, 05:40 PM

if hes gonna junk the truck id offer him $50 for it

dave2953 · 02-21-2007, 05:52 PM

I tried that, but didn't have any luck. I figured I could get it for cheap since he's getting rid of the truck anyway, but he said he would need $150. I decided to buy it from him and I'll post pics when I get it home.

PICKMUP · 02-22-2007, 12:38 AM

That sounds about right. I just bought another set for the same price. They fit good.
The low back buckets from that era are also cool seats.

brak · 02-22-2007, 01:01 AM

I keep finding them around here for $50.

it's the buckets that are impossible to find.

dan42 · 02-22-2007, 01:29 AM

I have some buckets that I got from a '96 Chevy extended cab, and they are pretty comfortable, but don't look right - I'm having a guy re-do by original bench, and try to spoon out the seats a little, but I'm not sure if it's going to work. Does anyone have any ideas on what is comfortable and looks fairly original? I have a '70 3/4 ton).

02-21-2007, 02:58 PM	#1
dave2953 Dave's not here, man Join Date: Jun 2004 Location: Winder, Georgia Posts: 2,000	60/40 Bench Seat Price A neighbor of mine has a 91 or 92 Chevy 1500 that he is going to junk. The 60/40 bench seat in it is in great condition (no tears, rips, not faded, etc) He said he would take $150 for it. Is this about the going rate, or does it seem high? I can try and get a pic if it will help. Thanks in advance for your input. __________________ - 2014 VW Jetta - 2015 VW Jetta - 1966 Ford F-250

02-21-2007, 03:01 PM	#2
bobthecop Senior Member Join Date: Nov 2006 Location: Yukon Oklahoma Posts: 2,647	Re: 60/40 Bench Seat Price Leather or cloth, leather ones around here go for $500.00 __________________ Happiness is towing your "new" truck home. 1972 C-10 1982 GMC (parts truck??) 1969 c10 parts truck 1969 C-10 ( my sons) 1992 Silverado 4X4 (now the boys truck)(now mine again) 2002 Tarus (my wife loves that car)

02-21-2007, 03:09 PM	#3
dave2953 Dave's not here, man Join Date: Jun 2004 Location: Winder, Georgia Posts: 2,000	Re: 60/40 Bench Seat Price It's cloth. __________________ - 2014 VW Jetta - 2015 VW Jetta - 1966 Ford F-250

02-21-2007, 03:20 PM	#4
Blue'72 Skinned knuckles Join Date: Oct 2006 Location: Longview, Washington Posts: 1,126	Re: 60/40 Bench Seat Price I'd steer clear of that seat if I were you! Just forget about it... Where exactly is it again? I'll be right over! That's not a bad deal if it's in great shape and a good color for you. I've had three trucks that I bought that seat for and got a smokin' deal each time, but they're hard to come by. I think each time I bought one it was $75, but if I found a real nice one now I wouldn't hesitate upping the ante .. __________________ '72 C-10 longbox soon to be short step! '72 Chevelle (sold in January) '07 Sebring '01 Ranger (I've gotta long commute..) If you try to fail, and succeed, which have you done? My build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=276904

02-21-2007, 03:10 PM	#5
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: 60/40 Bench Seat Price I have brought two sets of those seats, one for $100, other for $150, so it seems pretty fair to me. __________________ John Fabris 67 C10 SWB

02-21-2007, 03:17 PM	#6
dave2953 Dave's not here, man Join Date: Jun 2004 Location: Winder, Georgia Posts: 2,000	Re: 60/40 Bench Seat Price I think I'll get it from him. I got a quote to have my factory bench recovered and the broken springs repaired and they wanted $225. I imagine this seat will be more comfortable than my repaired original. Don't the 60/40 seats have 4 brackets instead of two? Guess I'll have to drill some holes if I get it. __________________ - 2014 VW Jetta - 2015 VW Jetta - 1966 Ford F-250

02-21-2007, 03:36 PM	#7
Blue'72 Skinned knuckles Join Date: Oct 2006 Location: Longview, Washington Posts: 1,126	Re: 60/40 Bench Seat Price The driver's side sits level on the floor and you'll need to drill out 3 of the holes for it if I remember right. You'll need to add an 1 1/2" spacer for the inside mount on the pass side. I bolted a piece of 2X8 to the floor and then bolted the seat mount to it. __________________ '72 C-10 longbox soon to be short step! '72 Chevelle (sold in January) '07 Sebring '01 Ranger (I've gotta long commute..) If you try to fail, and succeed, which have you done? My build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=276904

02-21-2007, 04:52 PM	#8
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: 60/40 Bench Seat Price I've had a late 80's 60/40 in my truck for years. It's sits in the truck well and is not too cushy or firm. worth the $$ in my opinion. __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

02-21-2007, 05:40 PM	#9
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: 60/40 Bench Seat Price if hes gonna junk the truck id offer him $50 for it __________________ 72 2wd blazer 72 swb 4x4

02-21-2007, 05:52 PM	#10
dave2953 Dave's not here, man Join Date: Jun 2004 Location: Winder, Georgia Posts: 2,000	Re: 60/40 Bench Seat Price I tried that, but didn't have any luck. I figured I could get it for cheap since he's getting rid of the truck anyway, but he said he would need $150. I decided to buy it from him and I'll post pics when I get it home. __________________ - 2014 VW Jetta - 2015 VW Jetta - 1966 Ford F-250

02-22-2007, 12:38 AM	#11
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,144	Re: 60/40 Bench Seat Price That sounds about right. I just bought another set for the same price. They fit good. The low back buckets from that era are also cool seats. Attached Images

02-22-2007, 01:01 AM	#12
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: 60/40 Bench Seat Price I keep finding them around here for $50. it's the buckets that are impossible to find. __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill

02-22-2007, 01:29 AM	#13
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: 60/40 Bench Seat Price I have some buckets that I got from a '96 Chevy extended cab, and they are pretty comfortable, but don't look right - I'm having a guy re-do by original bench, and try to spoon out the seats a little, but I'm not sure if it's going to work. Does anyone have any ideas on what is comfortable and looks fairly original? I have a '70 3/4 ton).



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.