![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Mar 2001
Location: springfield ill
Posts: 836
|
how to remove steering bearing
i have the steering wheel off,and i can see the bearing,but the turn signal canceller off,i also remove the 3 screws from it,its seem to be stuck on the right side.i think the harard button is holding it up.also is it a special bearing i have to order or can it be bought at a hardware store.
__________________
springfield illinois 2003 custom (harley)built from scratch 68 swb |
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Sep 2003
Location: DFW
Posts: 765
|
pull the hazard switch button, then the signal switcg should pull up, is the bearing bad? you can pick up the bearing from the dealer, and I belive the newer coulum bearings will work in the older coulums. also make sure there is a tapered race for the top of that bearing. if you got a camera post a picture of the parts you have, you may have parts missing if the shaft is loose.
__________________
The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself? |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Mar 2001
Location: springfield ill
Posts: 836
|
how does the hazard button come out
__________________
springfield illinois 2003 custom (harley)built from scratch 68 swb |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
![]()
If it is not a tilt wheel the hazard button does not have to come off. Make sure the button is in and then tip the switch and work it out.
Jim |
![]() |
![]() |
![]() |
Bookmarks |
|
|