72 c15 3-speed transmission mounts?

[jomatt20]

Hi guys, just curious if anyone would have pics of there trans mounts to the crossmember and if anyone would have a part no. For the mounts. The only ones I can seem to find look like they mount in the center of the crossmember which I do not have holes in mine too mount too...

[LockDoc]

Originally Posted by jomatt20

Hi guys, just curious if anyone would have pics of there trans mounts to the crossmember and if anyone would have a part no. For the mounts. The only ones I can seem to find look like they mount in the center of the crossmember which I do not have holes in mine too mount too...

I'm not familiar with the GMC's but I would think they would use the same bell housing mounts as the Chevys. No mount on the back of the transmission. It just hangs out in mid air....

LockDoc

[jomatt20]

Originally Posted by LockDoc

I'm not familiar with the GMC's but I would think they would use the same bell housing mounts as the Chevys. No mount on the back of the transmission. It just hangs out in mid air....

LockDoc

Yes there the same as the Chevys, do you have a part no. For the Chevy?

[frankslagoon]

So are you looking for the bellhousing mounts or the non excisting rear transmission mounts. are you replacing or changing to a different type tranny?

[jomatt20]

Originally Posted by frankslagoon

So are you looking for the bellhousing mounts or the non excisting rear transmission mounts. are you replacing or changing to a different type tranny?

Nope, staying original, I notice my crossmember has two oval holes that I'm assuming are for the mounts, also p/u my bell housing from my buds shop and noticed on the bottom of the bell housing on each corner there are threaded holes on each corner. When I was given the truck It was all apart so I was not able to see how it was mounted

[michael bustamante]

i have the 2 bolts and the pads and lockspacers if you need them. let me know and ill post pics

[jomatt20]

Originally Posted by michael bustamante

i have the 2 bolts and the pads and lockspacers if you need them.

Ship em over to big Louisiana!

[SS Tim]

The "rear engine mounts" are the four rubber parts needed. Do you have GM manuals for your truck? Here is a line drawing.

Where have you looked for the mounts and hardware?
Here is a clip from The Truck Shop's catalog to get you started.


* VIN/Model Decoders
* Power Team Charts (engine/transmission/gear ratio)
* Post Your Pickup SPID Blazer SPID Suburban/Panel SPID
* RTFM ... Read The Factory Manuals... download 'em here

[jomatt20]

Originally Posted by SS Tim

The "rear engine mounts" are the four rubber parts needed. Do you have GM manuals for your truck? Here is a line drawing.

Where have you looked for the mounts and hardware?
Here is a clip from The Truck Shop's catalog to get you started.


* VIN/Model Decoders
* Power Team Charts (engine/transmission/gear ratio)
* Post Your Pickup SPID Blazer SPID Suburban/Panel SPID
* RTFM ... Read The Factory Manuals... download 'em here

I've looked in lmc,eBay, rock auto,bumper to bumper and just couldn't find it. Only manual I have is an assy. Manual

[michael bustamante]

sure man i can that. ill pm you