Primer over POR15 WRINKLED! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Huck · 08-21-2002, 12:56 PM

Jamie_72 sent me a note re. putting primer over some POR15 and it got all wrinkled. Can anyone with experience on this help him out with a follow-on to this Thread? When I have used POR15, it was usually in a spot that I didn't care if the cover paint wrinkled as long as it sealed the rust! Thanks---Huck

vfrdude · 08-21-2002, 01:09 PM

From the POR-15 web store:

PRIMING OVER POR-15:
Use POR-15 Tie-Coat Primer after POR-15 is dry, following directions on can. Tie-Coat Primer may be sprayed or brushed in multiple coats if desired. Sands to a perfect finish.

This information should have been included with the product...

**jamie72** · 08-21-2002, 05:37 PM

i used the tie coat primer over the por-15,just like it said,it was completly dry shot primer over it,and it just crumbled up....the places with no por-15 on it look great

can i just sand it off and ruff up the por-15 and shoot it again?????

vfrdude · 08-21-2002, 06:10 PM

I don't think you need to use another primer over the tie-coat..
If I were you, I would either call or send a note to the POR-15 people...

http://porstore.com/contact.htm

**jamie72** · 08-21-2002, 10:07 PM

well i e-mailed the por-15 people,we`ll see what they say,
i used another primer because the tie coat is light,and the red oxide primer is dark,didn1t know if it would change the color of the paint...
thanks for the replies

08-21-2002, 12:56 PM	#1
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Primer over POR15 WRINKLED! Jamie_72 sent me a note re. putting primer over some POR15 and it got all wrinkled. Can anyone with experience on this help him out with a follow-on to this Thread? When I have used POR15, it was usually in a spot that I didn't care if the cover paint wrinkled as long as it sealed the rust! Thanks---Huck

08-21-2002, 01:09 PM	#2
vfrdude Registered User Join Date: May 2002 Location: Oakley, Ca. USA Posts: 137	From the POR-15 web store: PRIMING OVER POR-15: Use POR-15 Tie-Coat Primer after POR-15 is dry, following directions on can. Tie-Coat Primer may be sprayed or brushed in multiple coats if desired. Sands to a perfect finish. This information should have been included with the product... __________________ Rudy Fierros '95 Honda VFR750F Used to have a '71 Chevy Stepside, Guards Red, Lowered 4" rear, 3" front, White Oak bed wood, 700R4 w/373 gears until some low life stole it!

08-21-2002, 05:37 PM	#3
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,839	i used the tie coat primer over the por-15,just like it said,it was completly dry shot primer over it,and it just crumbled up....the places with no por-15 on it look great can i just sand it off and ruff up the por-15 and shoot it again????? __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

08-21-2002, 06:10 PM	#4
vfrdude Registered User Join Date: May 2002 Location: Oakley, Ca. USA Posts: 137	I don't think you need to use another primer over the tie-coat.. If I were you, I would either call or send a note to the POR-15 people... http://porstore.com/contact.htm __________________ Rudy Fierros '95 Honda VFR750F Used to have a '71 Chevy Stepside, Guards Red, Lowered 4" rear, 3" front, White Oak bed wood, 700R4 w/373 gears until some low life stole it!

08-21-2002, 10:07 PM	#5
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,839	well i e-mailed the por-15 people,we`ll see what they say, i used another primer because the tie coat is light,and the red oxide primer is dark,didn1t know if it would change the color of the paint... thanks for the replies __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.