The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-24-2007, 02:49 PM   #1
stope4
Registered User
 
Join Date: Jan 2006
Location: Houston
Posts: 434
One Piece Oil Pan Gasket

I have a 402 BB. It's a 1971 engine. What Felpro one piece oil pan gasket works with this? The one at O'Reillys has a thick front seal. I had them pull the four piece and it was very clear that the front and rear seals on the one piece were way thicker than the four piece. Looking for the felpro part number.
stope4 is offline   Reply With Quote
Old 12-24-2007, 03:26 PM   #2
Gray Ghost
Senior Member
 
Gray Ghost's Avatar
 
Join Date: Sep 2004
Location: Terrell, TX
Posts: 1,967
Re: One Piece Oil Pan Gasket

All of them are thicker...my Sbc has one on it right now and the builder said it was a pita to do. You will have to get longer screws to mount the pan.

I would guess the Fel-Pro Website might have that number for you. If not you might have to make a call when they re-open after XMAS.
__________________
Kelly
'05 GMC Sierra SLE Z71
Bone stock except for new bed rail caps.
Gray Ghost is offline   Reply With Quote
Old 12-24-2007, 06:59 PM   #3
sodak69c10
Registered User
 
sodak69c10's Avatar
 
Join Date: Mar 2007
Location: Rapid City, South Dakota
Posts: 285
Re: One Piece Oil Pan Gasket

i put one pieces on both my small blocks, both felpro's, they came with new bolts. had to drop the pans a long ways to get it in, rather expensive too, but worth it in my opinion less places to leak
__________________
,Clint
LOUD PIPES SAVE LIVES

69 C-10 short stepside 406 sbc, 02 YAMAHA WR250F, 07 SUZUKI SV650S, 81 Grand Prix 355 sbc, 81 XT 500 YAMAHA
sodak69c10 is offline   Reply With Quote
Old 12-25-2007, 03:41 AM   #4
mnunn454
Registered User
 
mnunn454's Avatar
 
Join Date: Dec 2006
Location: Rhode Island
Posts: 602
Re: One Piece Oil Pan Gasket

I used the 4 piece gaskets (plus a dab of silicone in the corners) on my 454 rebuild and it leaked from day 1. Swapped it for a 1-piece and the problem vanished.

I tossed the box so I can't find the P/N, but I got it from AutoZone for just over $40 as I recall.

I'll never use 4-piece gaskets again.
__________________
69 C-10 SWB Fleetside 454/TH400 (For Sale)
http://67-72chevytrucks.com/vboard/c...ct=1299&cat=12
70 El Camino 454 TH700
29 Model A 4-DR Sedan Deluxe
mnunn454 is offline   Reply With Quote
Old 12-25-2007, 05:06 AM   #5
stope4
Registered User
 
Join Date: Jan 2006
Location: Houston
Posts: 434
Re: One Piece Oil Pan Gasket

I used the one piece gasket on a small block 10 years ago and never had a leak afterwards. I know the gaskets are thicker, but need a part number for the bb. Don't want to remove the pan only to find out the gasket at the timing chain cover needed to be smaller. I have two part numbers FEL-OS-30061T and FPP1884R. O'Reilly's had the 61-T but didn't show they even sold the 1884R. I compared the 61-T to the four piece gasket. The front at the timing chain cover was about 3/16" to 1/4" thicker. The width was the same.
stope4 is offline   Reply With Quote
Old 12-25-2007, 05:38 AM   #6
jaros44sr
Senior Member
 
jaros44sr's Avatar
 
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,704
Re: One Piece Oil Pan Gasket

This part number came up on the jeg's site

375-1884R Fel pro BBC Check it out... J.
__________________
Semper Fi...Uncle Sam, you da man

All parts offered to help are free, unless otherwise noted

Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training
SAFETY FIRST

AS usual, off topic

They say your mind goes second, can't remember the first


Jim

Last edited by jaros44sr; 12-25-2007 at 05:39 AM.
jaros44sr is offline   Reply With Quote
Old 12-25-2007, 03:11 PM   #7
grayw0lf
Registered User
 
Join Date: Apr 2004
Location: Clanton, AL
Posts: 1,253
Re: One Piece Oil Pan Gasket

Here's another post to just say "well worth the $$!"
__________________
85' CUCV M1009!!! The newest addition!
6.2diesel, Th400, NP208, & only 36k miles!
70' C-10 LWB Fleetside - Looking good these days!
05' Dodge Neon
88' Winner Escape Sport 1750 - 4.3v6
94' Seadoo SP
84' Honda TRX200, bare nekkid. Just a frame & tires.

Always looking for another project or any good deal!

grayw0lf is offline   Reply With Quote
Old 12-25-2007, 03:33 PM   #8
FRENCHBLUE72
PROJECT 7DEUCE
 
FRENCHBLUE72's Avatar
 
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
Re: One Piece Oil Pan Gasket

I put a one piece on my 454 and it was a p.i.t.a. but its finally on there.
__________________
GO BIG GREEN GO DUCKS



MEMBER #6377

72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free.

Project "7DEUCE"

check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665



Tim Powell..R.I.P EastSideLowlife..... R.I.P..
FRENCHBLUE72 is offline   Reply With Quote
Old 12-26-2007, 05:28 AM   #9
1968SWBBigBlock
Active Member
 
1968SWBBigBlock's Avatar
 
Join Date: Oct 2006
Location: Ohio
Posts: 1,643
Re: One Piece Oil Pan Gasket

Buy longer bolts and the PITA will go away, I have changed mine on my truck twice _ other issues not the gasket- and no problems after you go to the longer bolts
__________________
1968 SWB
454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts
781 heads Ported with 2.19/1.88 SSTvalves
Lunati 60204 cam, Micro Trol lifters,
Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition
Holley 770 Street Avenger carb,Headers armor coated
Built by Watson Ruppel Performance in Sarahsville Ohio.
Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall
12 Bolt Eaton Posi 4.10 Richmond Gears moser axles
18.5" x 31" Hoosier Pro Street Radials
ET Classic 5 Wheels - polished
Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone)
Custom Paint & Body Work

Special thanks to my wife, my son and my money tree
1968SWBBigBlock is offline   Reply With Quote
Old 01-07-2008, 05:33 AM   #10
Gray Ghost
Senior Member
 
Gray Ghost's Avatar
 
Join Date: Sep 2004
Location: Terrell, TX
Posts: 1,967
Re: One Piece Oil Pan Gasket

Mine's leaking like a seive....the guy must have not put it in right. I have to go get this fixed now on a brand new motor!
__________________
Kelly
'05 GMC Sierra SLE Z71
Bone stock except for new bed rail caps.
Gray Ghost is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:53 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com