Need 3 hole gauge bezel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72 Pick Up · 01-12-2011, 11:45 PM

Looking for a 1968-72 3 hole gauge bezel/cluster for the steel backing plate so i can run a set of autometer gauges.

AirSpeed · 01-12-2011, 11:47 PM

Quote:

Originally Posted by 72 Pick Up

Looking for a 1968-72 3 hole gauge bezel for the steel backing plate so i can run a set of autometer gauges.

LMC and Classic Parts has them.

72 Pick Up · 01-12-2011, 11:54 PM

Quote:

Originally Posted by AirSpeed

LMC and Classic Parts has them.

They will not sale just the steel backing plate for the gauge cluster that is my problem.

maynardtruckin · 01-13-2011, 12:05 AM

I might have one that you could have your talking about the dummy gage setup right? I will look tomorrow If I remember and will let you know.

72 Pick Up · 01-13-2011, 12:10 AM

Quote:

Originally Posted by maynardtruckin

I might have one that you could have your talking about the dummy gage setup right? I will look tomorrow If I remember and will let you know.

I think so, just has speedo and gas gauge and blinkers in the middle. Thanks

maynardtruckin · 01-13-2011, 10:47 PM

crap forgot to check for that bezel put it on the top of my list for tomorrow first thing!

72 Pick Up · 01-13-2011, 11:38 PM

Quote:

Originally Posted by maynardtruckin

crap forgot to check for that bezel put it on the top of my list for tomorrow first thing!

Thanks hope you have one then I can stop checking ebay & craiglist.

PT'S 70 CST · 01-13-2011, 11:43 PM

I may have one and if so you can have it for the shipping cost. I will try and look tomorrow.

PT

72 Pick Up · 01-13-2011, 11:55 PM

[QUOTE=PT'S 70 CST;4409837]I may have one and if so you can have it for the shipping cost. I will try and look tomorrow.

That would be awesome.

maynardtruckin · 01-14-2011, 04:35 PM

well as of now I cant find the cluster, Figures! I will probably find it two weeks from now. if I do I will let you know if you have not got one yet.

72 Pick Up · 01-14-2011, 11:14 PM

Quote:

Originally Posted by maynardtruckin

well as of now I cant find the cluster, Figures! I will probably find it two weeks from now. if I do I will let you know if you have not got one yet.

Sounds good

PT'S 70 CST · 01-15-2011, 01:12 AM

I did not get a chance to look today and I am pulling 4 12 hr. shifts fri-mon. I will try and look when I get home in the am.

PT

68 SHORT-STEP'N · 01-15-2011, 02:48 AM

I have one for sale & I know where its at . lol let me know if your interested

72 Pick Up · 01-15-2011, 10:52 PM

Quote:

Originally Posted by 68 SHORT-STEP'N

I have one for sale & I know where its at . lol let me know if your interested

It looks like he found one for me. If it falls through I will get back to you. Thanks

PT'S 70 CST · 01-15-2011, 09:38 AM

I looked this morning and found one for you. Let me know if you want the whole cluster or the backing plate and bezel. It may save a little on shipping if you just want the bezel and plate, either way let me know. I will not be able to send it out until Tuesday.

PT

01-12-2011, 11:45 PM	#1
72 Pick Up Registered User Join Date: Mar 2007 Location: So Cal /OC Posts: 26	Need 3 hole gauge bezel Looking for a 1968-72 3 hole gauge bezel/cluster for the steel backing plate so i can run a set of autometer gauges. __________________ 72 Pick Up Last edited by 72 Pick Up; 01-13-2011 at 01:21 AM. Reason: add some word for better info.

01-13-2011, 12:05 AM	#4
maynardtruckin Registered User Join Date: Jan 2011 Location: Falcon \ Colorado Posts: 193	Re: Need 3 hole gauge bezel I might have one that you could have your talking about the dummy gage setup right? I will look tomorrow If I remember and will let you know. __________________ Chris 67 c10 swb build in progress 70 c10 lwb driver pending parts for drastic overhaul 70 c20 lwb parts truck for above mentioned drastic overhaul 71 k20 lwb building for off road use and towing

01-13-2011, 10:47 PM	#6
maynardtruckin Registered User Join Date: Jan 2011 Location: Falcon \ Colorado Posts: 193	Re: Need 3 hole gauge bezel crap forgot to check for that bezel put it on the top of my list for tomorrow first thing! __________________ Chris 67 c10 swb build in progress 70 c10 lwb driver pending parts for drastic overhaul 70 c20 lwb parts truck for above mentioned drastic overhaul 71 k20 lwb building for off road use and towing

01-13-2011, 11:43 PM	#8
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Need 3 hole gauge bezel I may have one and if so you can have it for the shipping cost. I will try and look tomorrow. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

01-13-2011, 11:55 PM	#9
72 Pick Up Registered User Join Date: Mar 2007 Location: So Cal /OC Posts: 26	Re: Need 3 hole gauge bezel [QUOTE=PT'S 70 CST;4409837]I may have one and if so you can have it for the shipping cost. I will try and look tomorrow. That would be awesome. __________________ 72 Pick Up

01-14-2011, 04:35 PM	#10
maynardtruckin Registered User Join Date: Jan 2011 Location: Falcon \ Colorado Posts: 193	Re: Need 3 hole gauge bezel well as of now I cant find the cluster, Figures! I will probably find it two weeks from now. if I do I will let you know if you have not got one yet. __________________ Chris 67 c10 swb build in progress 70 c10 lwb driver pending parts for drastic overhaul 70 c20 lwb parts truck for above mentioned drastic overhaul 71 k20 lwb building for off road use and towing

01-15-2011, 01:12 AM	#12
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Need 3 hole gauge bezel I did not get a chance to look today and I am pulling 4 12 hr. shifts fri-mon. I will try and look when I get home in the am. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

01-15-2011, 02:48 AM	#13
68 SHORT-STEP'N SLOW POKE Join Date: Nov 2010 Location: Tyro, VA Posts: 1,208	Re: Need 3 hole gauge bezel I have one for sale & I know where its at . lol let me know if your interested __________________ 68 SHORT-BED-STEP-SIDE piece by piece , day by day , I will restore this truck , before the 100th anniversary !!!

01-15-2011, 09:38 AM	#15
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Need 3 hole gauge bezel I looked this morning and found one for you. Let me know if you want the whole cluster or the backing plate and bezel. It may save a little on shipping if you just want the bezel and plate, either way let me know. I will not be able to send it out until Tuesday. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.