Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
10-16-2016, 06:10 PM | #1 |
Registered User
Join Date: Apr 2008
Location: Sacramento, CA
Posts: 201
|
Installation of Headlight Left On Warning Buzzer Kit
Hello all, recently I have been driving my truck more and I've been noticing that without the luxuries of modern vehicles I have been leaving my headlights on. Of course having a dead battery is the lame, so instead of tying a string around my finger I decided to install a warning buzzer.
The part number and the website are: Scott Drake C6AZ-14931-AR http://www.cjponyparts.com/scott-dra...1967/p/HW2259/ https://www.summitracing.com/parts/s...5HIaAvXS8P8HAQ |
10-16-2016, 06:18 PM | #2 |
Registered User
Join Date: Apr 2008
Location: Sacramento, CA
Posts: 201
|
Re: Installation of Headlight Left On Warning Buzzer Kit
I chose this kit because it had all of the connectors required for the install and it was easy to mount. However, the kit and instructions are designed for a mustang so I had to figure out where it should be wired in. See below... All in all it took less than an hour to install.
Black = Ground Yellow = Ignition on from ignition switch Red = Headlight on from headlight switch I have included pictures below referencing the correct wires to spice into, the blue circles are the correct wires. I hope this helps anyone else out there that has the same issue |
10-16-2016, 07:09 PM | #3 |
Registered User
Join Date: Apr 2008
Location: Sacramento, CA
Posts: 201
|
Re: Installation of Headlight Left On Warning Buzzer Kit
I forgot to include a picture of the kit's content, see below.
|
Bookmarks |
|
|