|
|
|
09-14-2005, 10:01 PM
|
#1 |
|
Active Member
Join Date: Jun 2005
Location: Idaho
Posts: 263
|
Speedo cable noise
Hey guys, I ripped the old granny gear tranny out of my 72 4x4 and re-hooked up my speedo cable and now occasionally I get a chittering noise coming from my dash and the speedo needle is bouncing around....do I need to lube this? also my speedo is registering about 7 miles per hour off. I got the parts (trans and transfer case) from a truck with the same gear ratio (3:73)...................so does this require a good lube..and what? or what else??
|
|
|
|
09-14-2005, 10:15 PM
|
#2 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
take the cable out of the housing wash it off with thinner or similar stuff//get speedocable lube==a dry graphite powder lube cable and reassemble
the dry graphite actually works as like a polishing compound and polishes the inside of the cable housingand cable assy
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
