project (sweet pea)

[bad6772]

Finally my own build thread. i have had this truck for about ten years now. And i have been looking at some of these trucks on here,some very nice trucks i might add. And the bug bit me again. When i did this truck in 97/98 i was a wee lad in the whole hot rod world. . i started with a good truck then, original owner never touched and had been in a barn for ten years. i did the normal stuff then . new door skins, new fenders grille bumpers. you get the idea. but this time around i am going take it all the way down. powder coat the frame, media blast everything, paint everything . i am going with new doors. core support . and i found that my cab supports were in a little attetion so i will be replacing all four of them also . not many customs things going on. shaved handles. drip rails ( I THINK ) shave the fire wall. and pretty much make everything smooth. engine wise i got a good foundation, ZZ3 Trans Wise , i have a new TCI 350 turbo with a 3000 stahl. well enough of me rambling . heres some pics . oh one more thing i am going to paint everything, under the cab edge everything .so i thinking of two toning it . maybe a light green and silver. im so tired of the torch red .ANY IDEAS WOULD BE APPRICATED.................THANKS TONY

[bad6772]

more pics




oh i couldnt forget my trusty tow vehicle. its a 70 gravely. they last forever

[Retro68]

Originally Posted by bad6772

more picsAttachment 279205

Attachment 279206

Attachment 279207
oh i couldnt forget my trusty tow vehicle. its a 70 gravely. they last forever
Attachment 279208

That looks a lot like a Wheel Horse Tractor.

[bad6772]

Originally Posted by Retro68

That looks a lot like a Wheel Horse Tractor.

Its a 77 Gravely that has a 26 H.P Kawasaki V twin .It runs really well.lol.Its my snow bandit....lol

[allen123]

Originally Posted by bad6772

more picsAttachment 279205

Attachment 279206

Attachment 279207
oh i couldnt forget my trusty tow vehicle. its a 70 gravely. they last forever
Attachment 279208

What are those seats out of sorry if its already been asked

[1Ton]

Looks like a good project. Way to keep the old iron going.

[bad6772]

thanks any idea s on paint ?

[Bishops Trucks]

Nice project. I also like to see some pics of your 2 future projects.

[bad6772]

the 29 and 36 are in my father in laws barn. i will get some pics next time we go up there. i cant wait to start on the 36, i only have a body but it was free so right now im only in it for gas to go get it . i got pretty much all the body pieces though , i am missing the left rear fender, but i have both fronts , from what i have been told they are the same all away around the left front is the right rear and the right front is the left rear???? so if this is the case i wont be running front fenders at all. i am going to run a 350 350 . when i get a frame. it should be a cool rat rod

[Bishops Trucks]

Sounds like a fun project. You might have to build a frame for that one.

[bad6772]

well i am ready to remove the cab. got alot done for as little time i spent on it this weekend. cab all stripped . i am soaking down the cab bolts with pb blaster so wish me luck. this ole thing has stayed in pretty good shap there are only two little spots in the floor. ill get pics today. passenger side footwell right above the floor support and in the passenger side rear. where the jack is or was. hopefully it will come off alright. i amd going to try and get it off the frame on the 4th....any tips on getting those cab bolts out ?? thanks tony

[bad6772]

well i hate posting back to back. but...figured i give and update.. i got the engine and tranny out this week end (BY MYSELF) that sucked !! as well as the core support and the bed. everything has gone pretty smooth so far. i have little time through out the week to work on it maybe an hour or two a night if im lucky, im still waiting on my sole called (BUDDIES) to come over and help get the cab off, i did notice something that i wasnt looking forward to, the inner rocker on the driver side is looking bad. i dont think i can save it??? when you buy inner rockers how far does is go to the floor????? i am getting my garage re-wired next week end.. so no more hand tools . and as soon as i get the cab off i am going to have it and the frame media blasted so im just wondering on what to order for the floor. i am going to replace all cab supports . and the passenger side front and rear sections. both rockers and i already have new cab corners. my rockers and cab corners look great but you never know till when its gets blasted. any ways this is being a slower build than i thaught it would be, the wife got laid off at delco remy last week so . i am being put on a budget now. any help on the inner rockers would be awsome. tony

[john]

Inspiration for the 36 IH project.


http://www.chooseyouritem.com/classi...00/106725.html

[bad6772]

wow john that thing is nice, was it yours? if so i have a ton of questions

[bad6772]

well i thaught i would post some of the recent work i have gotten done . got it down to the bare frame so far. just need to get the rear end out today, have been cleaning alot and welding up holes. this has been a slow build for me . i am still exiceted about doing a frame off, so the fun is still there . the wife just got a new job so that will help out on the fun money. ( Moderators) i have tried posting all my build threads together . but i am having no luck, ? could you tell me what i am doing wrong..? thank you in advance tony

[bad6772]

i tried to find my last posts on this but couldnt? but i have been doing a little work here and there to my 72. I ve been working on the frame now for about 4 weekends time permiting, and today i finally got it all painted up. It wasnt easy lots of elbow grease to get it her... only because i am a tight a$$ and didnt want to spend the money to have it blasted , so i had to clean everything by hand . weld up all un used holes and so on....... im going to be adding drop spindels, to my 2 inch coils..and i doing 2 inch shackels in the rear to my flip kit.. i am hoping to get it to set right this time??? im also going with new stainless brake lines and all around new everything suspesion wise...anyways here are some pics.........would like some feed back: edit : forgot to add the wife helped me with it....metal:

[bad6772]

more pics

[samwise68]

thats one pretty frame!

and the fact you did it with elbow grease, i dig it even more.

can't wait to see even more progress! keep it up!

-Sam.

[ChevyDude]

That frame looks...well...De-Lish!!! Nice job!

[gringoloco]

Looks good! Two things to consider: Your rear flip is about a 5.5" drop, so it should be about perfect with a 4.5" drop up front. If you do decide to do shackles out back, 2" will probably be too long and will contact the bed cross-sill.

[bad6772]

Thanks guys.... these picture i will say do it no justice. i did the primer and POR 15 paint first, all over , then the chassis black, then three coats of black base, four coats of clear.....long weekend none the less, but i had the wife helping,,she can paint our house walls , so whats the differance in my frame,lol she stuck throught the whole day, till i got the base out...she was gone, and when i was clearing i thaught she fell of the earth..no where in sight............. couldnt have gotten it done so fast with out her

[L0WRIDE]

nice dude

[72BlckButy]

That thing looks beautiful! Excellent work!

[bad6772]

getting ready to install the front suspension.. just got to get the ok from the wife on a few parts....thanks for the comments.......it makes it worth it that much more... more updates this weekend

[Rawpower420]

Great job, cant wait to see more.