![]() |
|
![]() |
#1 |
Registered User
Join Date: Feb 2005
Location: Lincoln, NE
Posts: 3
|
Engine identification
I am currently working on a big chevy truck a 1969 C50. I have the VIN, the engine block casting number and the engine block stamp code. My problem is that none of the web sites list the numbers that I have. Can anyone direct me to a place where I can find out what engine I have.
VIN CE539 J 804473 casting # 3756518 Stamp code F0426PA Last edited by dj1028; 09-21-2009 at 01:24 PM. |
![]() |
![]() |
![]() |
#2 |
Moderator
![]() Join Date: May 2007
Location: Southern Cal
Posts: 20,004
|
Re: Engine identification
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man Last edited by leddzepp; 09-21-2009 at 01:40 PM. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Feb 2005
Location: Lincoln, NE
Posts: 3
|
Re: Engine identification
Thanks for the additional web site, however this web site gives me the same information that all the others have given me, for example my block casting number is 3756518 which is not listed. It does list a 3756519 which is a 58-62 283 2bolt main. Most of the websites have numbers listed which are for cars and pickups but evedently there is no one listing numbers for bigger trucks. I am still searching. Thanks again anyway!
|
![]() |
![]() |
![]() |
#4 |
Ex-Minitrucker
Join Date: Apr 2009
Location: Bushnell, FL
Posts: 301
|
Re: Engine identification
alot of the big trucks had the same motors our C50 had a 292 L6 Are you sure its a big block because it could very well be a 283 or other regular production motor. But they made a 366 and 427 tall decks exclusively for the big trucks.
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Feb 2005
Location: Lincoln, NE
Posts: 3
|
Re: Engine identification
Hey every one, I found out what engine I have and wanted to share my findings. As I stated above I have a BIG TRUCK not a BIG BLOCK. I have a small block with the stamp code in front of the right side cylinder head of "F0426PA". I could not find anywhere on the WWW what the PA stood for. I initially did not go to one of the local Chevy dealers because I didn't have the faith that there would be anyone old enough to know what I wanted or know where to look. I lucked out though, I found a guy that is older than me to help me. The suffix of "PA" stands for 283 task master engine 55-62. I will continue to find out what the "task master" means. This confirms my suspicion that I did not have an original engine, the truck is a 1969. He found this information in a book dated May 1979 entitled Chevrolet Truck Illistrated Parts Book, 1946-1972, 1 1/2- 2 1/2 ton series 40-50-60. He also had the same book for the 10-20-30 series. Old parts guys ROCK!
|
![]() |
![]() |
![]() |
Bookmarks |
|
|