WTB The Ruber end on bucket seat lever - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**70cst** · 04-29-2022, 12:57 PM

Just like the title says - I need two of the rubber pieces that goes on the bucket seat lever for adjusting seats. 1970
Thanks

**Accelo** · 04-29-2022, 03:31 PM

If you can't find original stuff here is an option that will likely look correct to all but the most disconcerting eye. It's made is different diameters.

3M 8460 Cold Shrink, Shield Adapter Kit, O.D. Range: 0.83" - 1.64"

Sold at electrical supply houses.

**70cst** · 05-12-2022, 10:29 PM

Bump

**70cst** · 05-23-2022, 02:52 PM

Still looking

35boulder · 05-23-2022, 04:19 PM

Are these different from the bench seat ends? I have one of those.

**70cst** · 05-24-2022, 09:16 AM

Quote:

Originally Posted by 35boulder

Are these different from the bench seat ends? I have one of those.

Good question...

I am not sure.

Maybe others will chime in?

Thanks

35boulder · 05-24-2022, 07:18 PM

Here is the "knob" that I have. I opened the pkg for these pics

**70cst** · 05-25-2022, 08:11 AM

Quote:

Originally Posted by 35boulder

Are these different from the bench seat ends? I have one of those.

I was told there is a difference between the two. Do you have the knob that goes on the lever?
Those might be the same. Thanks

35boulder · 05-25-2022, 08:23 AM

I have the knob in the above picture

**70cst** · 05-03-2022, 11:18 AM

Quote:

Originally Posted by Tmend

Morning,
I have these you may choose from. The 2 far right look to have the tips missing. Also the photo of track is an nos one I have. Just wanted to show the boot. It’s a little longer then the ones I have and in your photo but shorter then the bench set tracks ones that I also have. Just a reference photo. I’m sure they all very. Anyhow is as $27 shipped for the 2 of your choosing. Thanks much
Attachment 2189019

Attachment 2189020

Attachment 2189021

I am hoping to find NOS if possible for my restored truck.

Thanks

**Tmend** · 05-03-2022, 11:43 AM

Quote:

Originally Posted by 70cst

I am hoping to find NOS if possible for my restored truck.

Thanks

Yes sir ..

**70cst** · 05-05-2022, 07:10 PM

Bump

04-29-2022, 12:57 PM	#1
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,374	WTB The Ruber end on bucket seat lever Just like the title says - I need two of the rubber pieces that goes on the bucket seat lever for adjusting seats. 1970 Thanks Attached Images __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

04-29-2022, 03:31 PM	#2
Accelo Senior Member Join Date: Mar 2015 Location: washington Posts: 2,280	Re: WTB The Ruber end on bucket seat lever If you can't find original stuff here is an option that will likely look correct to all but the most disconcerting eye. It's made is different diameters. 3M 8460 Cold Shrink, Shield Adapter Kit, O.D. Range: 0.83" - 1.64" Sold at electrical supply houses. Attached Images

05-12-2022, 10:29 PM	#3
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,374	Re: WTB The Ruber end on bucket seat lever Bump __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

05-23-2022, 02:52 PM	#4
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,374	Re: WTB The Ruber end on bucket seat lever Still looking __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

05-23-2022, 04:19 PM	#5
35boulder Registered User Join Date: Oct 2015 Location: Dallas Texas Posts: 1,382	Re: WTB The Ruber end on bucket seat lever Are these different from the bench seat ends? I have one of those.

05-24-2022, 07:18 PM	#7
35boulder Registered User Join Date: Oct 2015 Location: Dallas Texas Posts: 1,382	Re: WTB The Ruber end on bucket seat lever Here is the "knob" that I have. I opened the pkg for these pics Attached Images

05-25-2022, 08:23 AM	#9
35boulder Registered User Join Date: Oct 2015 Location: Dallas Texas Posts: 1,382	Re: WTB The Ruber end on bucket seat lever I have the knob in the above picture

05-05-2022, 07:10 PM	#12
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,374	Re: WTB The Ruber end on bucket seat lever Bump __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.