![]() |
|
![]() |
#1 |
Registered User
Join Date: Mar 2014
Location: pennylvania
Posts: 3
|
TH400 to SM465
hello. i recently purchased a 1987 gmc 2500. it has the turbo 400 trans and np208 transfer case. i am hoping to do a manual swap on it to a sm465 trans. what all would i need to do this? thanks
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: May 2010
Location: Lewis County, WA
Posts: 1,523
|
Re: TH400 to SM465
Besides the trans/transfer case, you'll need to decide if you want a mech or juice clutch...the pedal kits are different. You'll also need a flywheel, clutch, pedal box, floor hump (or cut yours), linkage or hydro components. You'll also likely need some driveshaft work done. Probably some stuff I've forgotten too.
__________________
'77 K35 - 454, SM465/NP205, 4.56 D60/14bFF |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Mar 2014
Location: pennylvania
Posts: 3
|
Re: TH400 to SM465
so not necessarily 'hard' , just finding all the parts to do it
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Dec 2012
Location: Hanston, KS
Posts: 94
|
Re: TH400 to SM465
Correct. It's easiest to have a donor truck. I would look for a transmission mated to an np205 with a fixed rear yoke. The slip yoke versions are also acceptable if you want less driveline hassle.
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,216
|
Re: TH400 to SM465
You will need a bell housing to go with the SM465. It has a larger center hole then the 3 speeds or earlier models.
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Mar 2014
Location: pennylvania
Posts: 3
|
Re: TH400 to SM465
what would be easier? a manual or hydraulic clutch?
|
![]() |
![]() |
![]() |
Bookmarks |
Tags |
1987, gmc 2500, sm465, th400 |
|
|