VA parting out a 70 non a/c swb stepside 72 frame. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 06-08-2011, 11:29 PM

this was a project truck with some new aftermarket parts.
i will post pics. and prices daily as i go threw it.
here are some things i remember it has with it.
large parts i would rather not ship.
new chrome aftermarket ft. & rear bumpers $275.00 for the pair.
2 of the best rust free dent free non spare tire orig. step bed fenders i have saw $700.00.
[will listen to reasonable offers on fenders & other parts.]
good driver shape ft. fenders $200.00 for the pair.
doors,5 lug ralleys,bed box,tailgate,power brake booster,power steering box,good driver grille, new door gaskets,new window gaskets, glove box incert,new vent window gaskets,battery tray,oak wood strips,and other parts watch tread daily for updates till i get it listed.

billsbowtie · 06-09-2011, 12:29 AM

bumpers

billsbowtie · 06-09-2011, 12:35 AM

here are most of the new parts.
chrome door seal plates.
glove box non a/c incert.
gas cap.
gas gasket.
heater rebuild kit.
mis. door & window gaskets.
looks like these parts cost around $200.00 in the lmc book.
i am asking $150.00 picked up or $165.00 shipped for everything.
would like to sale it altogether to get rid of it faster.

billsbowtie · 06-09-2011, 12:37 AM

nice pair of hood henges that have been cleaned up & painted $44.00 shipped. cheaper if picked up.

billsbowtie · 06-09-2011, 12:39 AM

i will be adding parts as i find them and get pic.s and prices,
i will try to keep all the parts with this truck in this tread.

**70STOVEBOLT** · 06-09-2011, 10:04 AM

Bill, where are you located in Virginia? I am going to be in the Williamsburg area in 2 weeks and may be able to pick up some things. Would you split the bumpers up? I really only need the front one.

Thanks,
Mark

Baby John · 06-09-2011, 10:22 AM

I'm interested in pricing for the tail gate, window seals and front bumper, but I didn't see whether this is a GMC or a Chevy.

I'm looking for a GMC front bumper that has the little notches or indentations or cut outs or whatever you call them for the front park lamps.

Also looking for a good repro tailgate...perferrably a blank one with no GMC or Chevrolet logo on it.

And for window seals...I really don't know. I know mine is a 72 with the large rear window and I think I've heard that there were two types of gaskets for the front...one with chrome trim and one without. I'm looking for the one without.

OLEBEATER · 06-09-2011, 04:50 PM

Were there any drop spindles or drop springs on the 72 frame?

ashley1972 · 06-09-2011, 05:25 PM

Interested in the back bumper shipped to 87532

laplander · 06-09-2011, 06:17 PM

I'll take the hood hinges...

billsbowtie · 06-09-2011, 09:38 PM

70STOVEBOLT if i split the bumpers up i would like to get $150.00 a piece for them. my zip code is 24281 i am on the very west tip of va. about 1 and 1/2 hours from knoxville tn.
Baby John it's a chevy so ft. bumper want work for you.the window gaskets i have are for the doors & door glasses.tailgate has a little rust but i didn't notice what it says chevy,gmc or anything yet.my lmc book says window gaskets fit 67/72.
OLEBEATER no drop spinal parts.
ashley1972 rear bumper would be $215.00 shipped to you.
laplander pm sent.

billsbowtie · 06-09-2011, 09:49 PM

here are some pic.s of the cab it may take a while for all of them to load. there is someone local looking interested in it . it has mostly had the bad spots fixed want need to much work.auto. colum,bake booster & dash pad are sold with cab. i will be asking $700.00 for it if local guy don't take it.the cab has a good driver windshield with new gasket new rear sliding glass with new gasket & new cab bolts,mounts,bushings that are included with cab those things will save someone over $300.00.
[CAB IS SOLD]

billsbowtie · 06-09-2011, 09:50 PM

billsbowtie · 06-09-2011, 09:52 PM

billsbowtie · 06-09-2011, 09:52 PM

billsbowtie · 06-09-2011, 09:53 PM

billsbowtie · 06-09-2011, 09:54 PM

billsbowtie · 06-09-2011, 09:55 PM

cab use to be on a 4wd. that is why the hole is there.

billsbowtie · 06-09-2011, 09:56 PM

billsbowtie · 06-09-2011, 09:57 PM

billsbowtie · 06-09-2011, 10:00 PM

billsbowtie · 06-09-2011, 10:04 PM

billsbowtie · 06-09-2011, 10:08 PM

billsbowtie · 06-09-2011, 10:13 PM

[IMG]http://i85.photobucket.com/albums/k61/tinyrulz/100_4230.jpg[/IMGthis is last pic. of cab. i will try to post some pics. of the rust free bed fenders.

billsbowtie · 06-09-2011, 10:38 PM

i will to post some more fri.

06-08-2011, 11:29 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	parting out a 70 non a/c swb stepside 72 frame. this was a project truck with some new aftermarket parts. i will post pics. and prices daily as i go threw it. here are some things i remember it has with it. large parts i would rather not ship. new chrome aftermarket ft. & rear bumpers $275.00 for the pair. 2 of the best rust free dent free non spare tire orig. step bed fenders i have saw $700.00. [will listen to reasonable offers on fenders & other parts.] good driver shape ft. fenders $200.00 for the pair. doors,5 lug ralleys,bed box,tailgate,power brake booster,power steering box,good driver grille, new door gaskets,new window gaskets, glove box incert,new vent window gaskets,battery tray,oak wood strips,and other parts watch tread daily for updates till i get it listed. __________________ i have 67/72 chevy truck parts f/s. Last edited by billsbowtie; 06-14-2011 at 10:58 AM.

06-09-2011, 12:29 AM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. bumpers __________________ i have 67/72 chevy truck parts f/s.

06-09-2011, 12:35 AM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. here are most of the new parts. chrome door seal plates. glove box non a/c incert. gas cap. gas gasket. heater rebuild kit. mis. door & window gaskets. looks like these parts cost around $200.00 in the lmc book. i am asking $150.00 picked up or $165.00 shipped for everything. would like to sale it altogether to get rid of it faster. __________________ i have 67/72 chevy truck parts f/s.

06-09-2011, 12:37 AM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. nice pair of hood henges that have been cleaned up & painted $44.00 shipped. cheaper if picked up. __________________ i have 67/72 chevy truck parts f/s.

06-09-2011, 12:39 AM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. i will be adding parts as i find them and get pic.s and prices, i will try to keep all the parts with this truck in this tread. __________________ i have 67/72 chevy truck parts f/s.

06-09-2011, 10:04 AM	#6
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,357	Re: parting out a 70 non a/c swb stepside 72 frame. Bill, where are you located in Virginia? I am going to be in the Williamsburg area in 2 weeks and may be able to pick up some things. Would you split the bumpers up? I really only need the front one. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

06-09-2011, 10:22 AM	#7
Baby John Registered User Join Date: Jul 2007 Location: Mendenhall MS Posts: 222	Re: parting out a 70 non a/c swb stepside 72 frame. I'm interested in pricing for the tail gate, window seals and front bumper, but I didn't see whether this is a GMC or a Chevy. I'm looking for a GMC front bumper that has the little notches or indentations or cut outs or whatever you call them for the front park lamps. Also looking for a good repro tailgate...perferrably a blank one with no GMC or Chevrolet logo on it. And for window seals...I really don't know. I know mine is a 72 with the large rear window and I think I've heard that there were two types of gaskets for the front...one with chrome trim and one without. I'm looking for the one without. __________________ Baby John & Tyler Shows My son and I are resto-rodding a '72 GMC Stepside

06-09-2011, 04:50 PM	#8
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: parting out a 70 non a/c swb stepside 72 frame. Were there any drop spindles or drop springs on the 72 frame?

06-09-2011, 05:25 PM	#9
ashley1972 Registered User Join Date: May 2011 Location: espanola,nm Posts: 61	Re: parting out a 70 non a/c swb stepside 72 frame. Interested in the back bumper shipped to 87532

06-09-2011, 06:17 PM	#10
laplander Registered User Join Date: Nov 2002 Location: NM Posts: 705	Re: parting out a 70 non a/c swb stepside 72 frame. I'll take the hood hinges...

06-09-2011, 09:38 PM	#11
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. 70STOVEBOLT if i split the bumpers up i would like to get $150.00 a piece for them. my zip code is 24281 i am on the very west tip of va. about 1 and 1/2 hours from knoxville tn. Baby John it's a chevy so ft. bumper want work for you.the window gaskets i have are for the doors & door glasses.tailgate has a little rust but i didn't notice what it says chevy,gmc or anything yet.my lmc book says window gaskets fit 67/72. OLEBEATER no drop spinal parts. ashley1972 rear bumper would be $215.00 shipped to you. laplander pm sent. __________________ i have 67/72 chevy truck parts f/s.

06-09-2011, 09:49 PM	#12
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. here are some pic.s of the cab it may take a while for all of them to load. there is someone local looking interested in it . it has mostly had the bad spots fixed want need to much work.auto. colum,bake booster & dash pad are sold with cab. i will be asking $700.00 for it if local guy don't take it.the cab has a good driver windshield with new gasket new rear sliding glass with new gasket & new cab bolts,mounts,bushings that are included with cab those things will save someone over $300.00. [CAB IS SOLD] __________________ i have 67/72 chevy truck parts f/s. Last edited by billsbowtie; 06-13-2011 at 05:06 PM.

06-09-2011, 09:50 PM	#13
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. __________________ i have 67/72 chevy truck parts f/s.

06-09-2011, 09:52 PM	#14
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. __________________ i have 67/72 chevy truck parts f/s.

06-09-2011, 09:53 PM	#16
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. __________________ i have 67/72 chevy truck parts f/s.



Register or Log In To remove these advertisements.

06-09-2011, 09:54 PM	#17
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. __________________ i have 67/72 chevy truck parts f/s.

06-09-2011, 09:55 PM	#18
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. cab use to be on a 4wd. that is why the hole is there. __________________ i have 67/72 chevy truck parts f/s.

06-09-2011, 09:56 PM	#19
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. __________________ i have 67/72 chevy truck parts f/s.

06-09-2011, 09:57 PM	#20
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. __________________ i have 67/72 chevy truck parts f/s.

06-09-2011, 10:00 PM	#21
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. __________________ i have 67/72 chevy truck parts f/s.

06-09-2011, 10:04 PM	#22
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. __________________ i have 67/72 chevy truck parts f/s.

06-09-2011, 10:08 PM	#23
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. __________________ i have 67/72 chevy truck parts f/s.

06-09-2011, 10:13 PM	#24
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. [IMG]http://i85.photobucket.com/albums/k61/tinyrulz/100_4230.jpg[/IMGthis is last pic. of cab. i will try to post some pics. of the rust free bed fenders. __________________ i have 67/72 chevy truck parts f/s.

06-09-2011, 10:38 PM	#25
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out a 70 non a/c swb stepside 72 frame. i will to post some more fri. __________________ i have 67/72 chevy truck parts f/s.

Register or Log In To remove these advertisements.