1972 opinion needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Steven Sellers · 10-23-2008, 04:12 PM

Hey guys I have a question, I am looking at this 72 with a 350/350 supposedly rebuilt within the last year.
The guy broke the bolt off in the head trying to install the upper alternator bracket, so when I go drive it I can only drive it around the block or so.
He states the floor pans and rockers have been replaced and new carpet installed, which he said he will be happy to pull up so I can inspect for any rust.

Now he is asking 1,500 for the truck and he is some financial trouble so I really believe I can get him down to 1,000. I have never replaced the bolt hes speakin of and originally I was lookin at maybe pickin this up to upgrade my 70, axles/brakes/motor/tranny, but I may juet fix this one and drive it.

So how big a deal is replacing this bolt and am I missing something cause this one seems like a bargain

Thanks
Steve

GOPAPA · 10-23-2008, 04:37 PM

Maybe as easy as a easy out as far as the broken bolt removal ,,but I must ask ,,the guy is in financial trouble ,,why not just give him the $1500 .. the truck would still be a great buy. Look how clean he kept it for you .. just saying ..

I guess I feel sorry for the folks ,,thats all ,, Papa

Hawker7 · 10-23-2008, 04:53 PM

That would be a steal at $1,500

Steven Sellers · 10-23-2008, 08:01 PM

Quote:

Originally Posted by GOPAPA

Maybe as easy as a easy out as far as the broken bolt removal ,,but I must ask ,,the guy is in financial trouble ,,why not just give him the $1500 .. the truck would still be a great buy. Look how clean he kept it for you .. just saying ..

I guess I feel sorry for the folks ,,thats all ,, Papa

I do agree with the way you are thinking, I will word it a lil better for you. Hes a fairly young guy that cant afford to pay for the gas milage on this truck and pay the vet bills for his dog :-(.

I also think its a screaming deal but I wanted to bounce it off you guys

GOPAPA · 10-23-2008, 08:16 PM

Streven ,, Now we know why he needs the money all the more .. I don't blame you for wanting it cheaper ,,heck No! I like great bargains too. As you see form the replies you are getting ,,You are one lucky guy to find a truck with a pretty fresh motor ,hardly any rust and looking good... I envy your talent to find such a deal .. papa gives you a high 5..

hdflstf · 10-23-2008, 08:21 PM

That's a good deal so long as he didn't have an idiot build the motor like the one in mine (another story for another thread..).

Get a nut and mig weld it through the hole to the broken bolt. Put a wrench on the nut and turn. It's the easiest broken bolt R&R method I've ever tried.

JohnnyBeagle · 10-23-2008, 05:02 PM

that's a sweet truck for $1500

chevguy7 · 10-23-2008, 05:12 PM

I would pay $1500 for it. We paid $1200 for my truck 5 years ago and it was definately not as nice as that one.

CheyenneShop · 10-23-2008, 05:22 PM

Merry X-mas to you! Buy, buy, buy! Thats a good deal. Enjoy

MrGoodpliers · 10-23-2008, 05:25 PM

Before the EZ out, you could try cramming a rag or paper towel in the hole and back the broken bolt out. It's worked for me before.

Mike J · 10-23-2008, 06:07 PM

I agree with everybody else, that looks like a nice truck for the price for sure

Longhorn Man · 10-23-2008, 08:49 PM

even with the engine NOT being rebuilt, it's still a steal.
Remember this though, if the guy has been fixing it up, then he has a clue as to what it is worth.
If he is able to doo floor boards and engine work, and recover seats... he has a clue what the labor is worth.
You p!ss him off by low baling him from his already bottom dollar, you may well not get the truck.
If it is a good deal, then give him what he's asking. That's my opinion, and granted, that's all it is... MY opinion.

Steven Sellers · 10-23-2008, 10:16 PM

Quote:

Originally Posted by Longhorn Man

even with the engine NOT being rebuilt, it's still a steal.
Remember this though, if the guy has been fixing it up, then he has a clue as to what it is worth.
If he is able to doo floor boards and engine work, and recover seats... he has a clue what the labor is worth.
You p!ss him off by low baling him from his already bottom dollar, you may well not get the truck.
If it is a good deal, then give him what he's asking. That's my opinion, and granted, that's all it is... MY opinion.

Thats exactly what I thought when I saw the initial price, then he baited the hook and told me to come and take a look tomorrow and he would cut me a deal, so he could get his dog taken care of.

R.L. · 10-23-2008, 10:58 PM

I hate telling someone what to do in these cases but if the guy looked you in the eye after you tried to talk him down to 1k and said he had to have 2k I'd feel like that truck would still be worth it. If you can't remove the bolt your self you can get that removed easy enough. Thats a great find congrats, what ever you wind up giving for it IMO its worth it.

Steven Sellers · 10-24-2008, 02:46 PM

Well crap wouldnt you know it my wifes car started acting up today, of course it is her work car and it does have 236,000 on it and it appears a new motor/rebuild may be in order.
I cant do both so if anyone that lives near Virginia Beach, Va is interested in this truck I can give you the contact info, I doubt hell have it for long.

Steve

**El Jay** · 10-24-2008, 02:57 PM

Quote:

Originally Posted by Steven Sellers

Well crap wouldnt you know it my wifes car started acting up today, of course it is her work car and it does have 236,000 on it and it appears a new motor/rebuild may be in order.
I cant do both so if anyone that lives near Virginia Beach, Va is interested in this truck I can give you the contact info, I doubt hell have it for long.

Steve

Ahhhh, Man
That sucks.

That truck is truly a steal.
I mean, the worst case scenario would've been pulling the head & have an automotive machine shop extract the bolt; if nothing else worked.

Maybe the misses' car ain't as bad as you think & you can still snag the truck.

Good luck in whatever you decide/have to do.

Steven Sellers · 10-24-2008, 03:17 PM

Quote:

Originally Posted by El Jay

Ahhhh, Man
That sucks.

That truck is truly a steal.
I mean, the worst case scenario would've been pulling the head & have an automotive machine shop extract the bolt; if nothing else worked.

Maybe the misses' car ain't as bad as you think & you can still snag the truck.

Good luck in whatever you decide/have to do.

I hope so but man her work car has a lot of miles and it aint soundin good, Im going out to check it over and maybe to a compression check if needed. I may still see if I can convince her I need the truck to relax me after working on that right hand drive Subaru

rambler · 10-24-2008, 03:29 PM

I wish I was nearby, I would pick it up,, thats a deal! I broke the exact same bolt off redoing my truck, and I did the dump think,, broke the easyout as well. so had to drill it out and retap it.. pain, but got it working... heck buy the truck and make it her DD.

Dowdy · 10-25-2008, 09:34 AM

I would recommend pulling the head off to access the broken bolt. You may be able to turn it out with your fingers. This will also give you the opportunity to inspect the head and block surfaces, as well as look at the pistons and cylinder walls.

Blazer1970 · 10-26-2008, 07:10 AM

Quote:

Originally Posted by Dowdy

I would recommend pulling the head off to access the broken bolt. You may be able to turn it out with your fingers. This will also give you the opportunity to inspect the head and block surfaces, as well as look at the pistons and cylinder walls.

If you're gonna pull the head off, just pull them both off, switch them from side to side and forget about the broken bolt.

Longhorn Man · 10-26-2008, 08:25 AM

Quote:

Originally Posted by Dowdy

I would recommend pulling the head off to access the broken bolt. You may be able to turn it out with your fingers. This will also give you the opportunity to inspect the head and block surfaces, as well as look at the pistons and cylinder walls.

that is overkill of all overkill ideas I've heard.
Sorry, but in my opinion, it is pretty much a waste of time. There is no point in spending the afternoon rippin git apart, then spending close to $50 in gaskets to remove the broken bolt.
The fact of the matter is, that bolt can be removed almost as ieasily where the head is now.

Zappafan · 10-25-2008, 10:23 AM

What a great deal, why are they always so far away? At that price it should already be gone. Wouldn't your wife like a nice truck for her work vehicle?

ashx2 · 10-26-2008, 12:05 PM

Buy the truck! Then tell your wife that there's nothing hotter than a stellar babe in a classic truck.....unless of course that stellar babe is sitting beside you in that classic truck!

10-23-2008, 04:12 PM	#1
Steven Sellers Registered User Join Date: Jan 2002 Location: North Carolina Posts: 692	1972 opinion needed Hey guys I have a question, I am looking at this 72 with a 350/350 supposedly rebuilt within the last year. The guy broke the bolt off in the head trying to install the upper alternator bracket, so when I go drive it I can only drive it around the block or so. He states the floor pans and rockers have been replaced and new carpet installed, which he said he will be happy to pull up so I can inspect for any rust. Now he is asking 1,500 for the truck and he is some financial trouble so I really believe I can get him down to 1,000. I have never replaced the bolt hes speakin of and originally I was lookin at maybe pickin this up to upgrade my 70, axles/brakes/motor/tranny, but I may juet fix this one and drive it. So how big a deal is replacing this bolt and am I missing something cause this one seems like a bargain Thanks Steve Attached Images __________________ 2008 Buick Enclave(wifes new non wrecked) 1996 Jeep Cherokee 2002 2500HD 6.0L (traded) 1998 Jeep Grand Cherokee(wifes/wrecked) 1977 DJ5 postal jeep(mmm lots of fun) 1988 Toyota 2wd p/u(DD, blewup 199,000) 1991 Toyota 2ed p/u (sry just cant break these things) 1997 XR70 Honda 1991 Z50(FOR SALE) 1972 Z50 Honda 1970 SWB 350/knucklebuster "The adventure begins and I am confident that there will be no end".

10-23-2008, 04:37 PM	#2
GOPAPA Senior Member Join Date: Oct 2007 Location: Nampa Idaho Posts: 7,551	Re: 1972 opinion needed Maybe as easy as a easy out as far as the broken bolt removal ,,but I must ask ,,the guy is in financial trouble ,,why not just give him the $1500 .. the truck would still be a great buy. Look how clean he kept it for you .. just saying .. I guess I feel sorry for the folks ,,thats all ,, Papa __________________ When you learn a thing a day you store up smart.

10-23-2008, 04:53 PM	#3
Hawker7 Registered User Join Date: Jan 2008 Location: Raleigh, NC Posts: 321	Re: 1972 opinion needed That would be a steal at $1,500

10-23-2008, 08:16 PM	#5
GOPAPA Senior Member Join Date: Oct 2007 Location: Nampa Idaho Posts: 7,551	Re: 1972 opinion needed Streven ,, Now we know why he needs the money all the more .. I don't blame you for wanting it cheaper ,,heck No! I like great bargains too. As you see form the replies you are getting ,,You are one lucky guy to find a truck with a pretty fresh motor ,hardly any rust and looking good... I envy your talent to find such a deal .. papa gives you a high 5.. __________________ When you learn a thing a day you store up smart.

10-23-2008, 08:21 PM	#6
hdflstf Registered User Join Date: Oct 2007 Location: Desert Southwest Posts: 540	Re: 1972 opinion needed That's a good deal so long as he didn't have an idiot build the motor like the one in mine (another story for another thread..). Get a nut and mig weld it through the hole to the broken bolt. Put a wrench on the nut and turn. It's the easiest broken bolt R&R method I've ever tried.

10-23-2008, 05:02 PM	#7
JohnnyBeagle Registered User Join Date: Oct 2008 Location: Austin, TX Posts: 44	Re: 1972 opinion needed that's a sweet truck for $1500

10-23-2008, 05:12 PM	#8
chevguy7 Registered User Join Date: Oct 2006 Location: Washington Posts: 316	Re: 1972 opinion needed I would pay $1500 for it. We paid $1200 for my truck 5 years ago and it was definately not as nice as that one. __________________ 1970 C10 - ECE 3.5/5 drop, dual exhaust with turbo mufflers, front discs http://67-72chevytrucks.com/vboard/s...d.php?t=272458 2000 Buick Regal GS - Supercharged 3.8 V6 240hp, 1/4 mile 15 seconds

10-23-2008, 05:22 PM	#9
CheyenneShop Registered User Join Date: Feb 2008 Location: Arizona Posts: 638	Re: 1972 opinion needed Merry X-mas to you! Buy, buy, buy! Thats a good deal. Enjoy __________________ 72 Cheyenne shorty "*CheyLow" 72 3/4 long 4X4 69 SWB "Prospector" 68 C/10 shorty - "Picacho"* http://67-72chevytrucks.com/vboard/s...d.php?t=428379 *sold to "93redsled"* Have you heard about *C10 Talk? C10 Talk* is a podcast all about C10 Trucks, the builders, the vendors, and most importantly the C10 Community. Check us out online at www.c10talk.com

10-23-2008, 05:25 PM	#10
MrGoodpliers Registered User Join Date: May 2002 Location: Gainesville, Georgia Posts: 704	Re: 1972 opinion needed Before the EZ out, you could try cramming a rag or paper towel in the hole and back the broken bolt out. It's worked for me before. __________________ We made Oklahoma a little after 3, Randy & his brother Bob & my old GMC...

10-23-2008, 06:07 PM	#11
Mike J vw guy & now c-10 guy Join Date: Sep 2008 Location: Louisville,KY Posts: 483	Re: 1972 opinion needed I agree with everybody else, that looks like a nice truck for the price for sure __________________ '68 long fleet Finally made some progress on the build!!! My Build Thread

10-23-2008, 08:49 PM	#12
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: 1972 opinion needed even with the engine NOT being rebuilt, it's still a steal. Remember this though, if the guy has been fixing it up, then he has a clue as to what it is worth. If he is able to doo floor boards and engine work, and recover seats... he has a clue what the labor is worth. You p!ss him off by low baling him from his already bottom dollar, you may well not get the truck. If it is a good deal, then give him what he's asking. That's my opinion, and granted, that's all it is... MY opinion.

10-23-2008, 10:58 PM	#14
R.L. Registered User Join Date: Sep 2008 Location: Mobile, Al. Posts: 687	Re: 1972 opinion needed I hate telling someone what to do in these cases but if the guy looked you in the eye after you tried to talk him down to 1k and said he had to have 2k I'd feel like that truck would still be worth it. If you can't remove the bolt your self you can get that removed easy enough. Thats a great find congrats, what ever you wind up giving for it IMO its worth it.

10-24-2008, 02:46 PM	#15
Steven Sellers Registered User Join Date: Jan 2002 Location: North Carolina Posts: 692	Re: 1972 opinion needed Well crap wouldnt you know it my wifes car started acting up today, of course it is her work car and it does have 236,000 on it and it appears a new motor/rebuild may be in order. I cant do both so if anyone that lives near Virginia Beach, Va is interested in this truck I can give you the contact info, I doubt hell have it for long. Steve __________________ 2008 Buick Enclave(wifes new non wrecked) 1996 Jeep Cherokee 2002 2500HD 6.0L (traded) 1998 Jeep Grand Cherokee(wifes/wrecked) 1977 DJ5 postal jeep(mmm lots of fun) 1988 Toyota 2wd p/u(DD, blewup 199,000) 1991 Toyota 2ed p/u (sry just cant break these things) 1997 XR70 Honda 1991 Z50(FOR SALE) 1972 Z50 Honda 1970 SWB 350/knucklebuster "The adventure begins and I am confident that there will be no end".

10-24-2008, 03:29 PM	#18
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	Re: 1972 opinion needed I wish I was nearby, I would pick it up,, thats a deal! I broke the exact same bolt off redoing my truck, and I did the dump think,, broke the easyout as well. so had to drill it out and retap it.. pain, but got it working... heck buy the truck and make it her DD. __________________ No matter where you are..... There you are... Buckaroo Banzi

10-25-2008, 09:34 AM	#19
Dowdy Registered User Join Date: Dec 2006 Location: Oviedo, Florida Posts: 11	Re: 1972 opinion needed I would recommend pulling the head off to access the broken bolt. You may be able to turn it out with your fingers. This will also give you the opportunity to inspect the head and block surfaces, as well as look at the pistons and cylinder walls.



Register or Log In To remove these advertisements.

10-25-2008, 10:23 AM	#22
Zappafan Registered User Join Date: Jan 2008 Location: Sidney, British Columbia Posts: 104	Re: 1972 opinion needed What a great deal, why are they always so far away? At that price it should already be gone. Wouldn't your wife like a nice truck for her work vehicle?

10-26-2008, 12:05 PM	#23
ashx2 Registered User Join Date: Aug 2008 Location: Graham, Texas Posts: 239	Re: 1972 opinion needed Buy the truck! Then tell your wife that there's nothing hotter than a stellar babe in a classic truck.....unless of course that stellar babe is sitting beside you in that classic truck!

Register or Log In To remove these advertisements.