AL Part out of 1967 Open Road Camper - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**nlped** · 10-12-2014, 05:27 PM

Well after much diliberation, I've decided to part this one out.

1967 Chevrolet Open Road Campers INC motorhome.

I'm keeping the motor, complete doors for another project, but most everything else is available.

Lights, grille, any trim, brake & steering related pieces, TH400 trans, interior pieces etc.

There are additional pictures in my "Chubby" build thread.

Ask about pieces/parts here and I'll try and post pics as quickly as possible with a price.

Thanks...

All prices quoted are plus Paypal fees...

**nlped** · 10-12-2014, 05:29 PM

I've sold the roof air, generator, and the awning...

All windows, side door, rear sliding glass door are intact and functioning. So are the original camper interior propane lanterns by Humphrey.

Dirt's72 · 10-12-2014, 05:46 PM

Interested in the dash pad if original.

**nlped** · 10-12-2014, 06:07 PM

Quote:

Originally Posted by Dirt's72

Interested in the dash pad if original.

It certainly appears to be original. No damage that I can report. It is the same color as the dash and the interior color of the doors and any visible original paint...

Tough to get a good picture, but here are a few...

$65 plus shipping?

Dirt's72 · 10-12-2014, 06:51 PM

Quote:

Originally Posted by nlped

It certainly appears to be original. No damage that I can report. It is the same color as the dash and the interior color of the doors and any visible original paint...

Tough to get a good picture, but here are a few...

$65 plus shipping?

Sounds good. If you don't mind one more pic of the backside of it when you get it taken out. Also if you can get the defrost vents out without breaking the tabs let me know. Thank You.

**nlped** · 10-12-2014, 06:53 PM

Quote:

Originally Posted by Dirt's72

Sounds good. If you don't mind one more pic of the backside of it when you get it taken out. Thanks

No problem... It's raining here, so I'll wait to remove. I may melt

**nlped** · 10-13-2014, 08:13 PM

Quote:

Originally Posted by Dirt's72

Sounds good. If you don't mind one more pic of the backside of it when you get it taken out. Also if you can get the defrost vents out without breaking the tabs let me know. Thank You.

I got the dash pad and defrost vents out without much issue...
All tabs intact...

REEDS 72 · 10-12-2014, 06:02 PM

Pics of gauge cluster.

**nlped** · 10-12-2014, 06:08 PM

Quote:

Originally Posted by REEDS 72

Pics of gauge cluster.

You can see from the above pics... The cluster AIN'T original

I do have an original cluster from my '68 though...

**nlped** · 10-12-2014, 06:11 PM

This has a 4-speed high hump in it too

Undone · 10-12-2014, 06:30 PM

Condition and price of both fenders? Would you ship?

**nlped** · 10-12-2014, 06:35 PM

Quote:

Originally Posted by Undone

Condition and price of both fenders? Would you ship?

The fenders are in really good shape, but as you can see from the pics, the PO did drill a couple of holes in them for aftermarket trailer style parking lights

and the passenger one will have holes in it from the upright where the awning hardware is mounted...

I'd ship, but I have no idea how much shipping would run...

They are very solid with no visible rust, even in the super common passenger front cup.

$65 each?

**too much stuff** · 10-12-2014, 06:39 PM

Seat belts and glovebox door?

**nlped** · 10-12-2014, 06:42 PM

Quote:

Originally Posted by too much stuff

Seat belts and glovebox door?

Seat belts aren't original...some sort of aftermarket burgundy 3 point belts.

Glove box door would be $50 shipped?

Undone · 10-12-2014, 07:57 PM

Quote:

Originally Posted by nlped

The fenders are in really good shape, but as you can see from the pics, the PO did drill a couple of holes in them for aftermarket trailer style parking lights

and the passenger one will have holes in it from the upright where the awning hardware is mounted...

I'd ship, but I have no idea how much shipping would run...

They are very solid with no visible rust, even in the super common passenger front cup.

$65 each?

I am very interested pending shipping quote, possible Greyhound to Athens Ga. terminal.

**nlped** · 10-12-2014, 08:16 PM

Quote:

Originally Posted by Undone

I am very interested pending shipping quote, possible Greyhound to Athens Ga. terminal.

PM me an address and I'll check. I don't live ANYWHERE near a greyhound.

**nlped** · 10-14-2014, 09:04 AM

Quote:

Originally Posted by Undone

I am very interested pending shipping quote, possible Greyhound to Athens Ga. terminal.

PM sent...

**DaHos** · 10-12-2014, 10:55 PM

Quote:

Originally Posted by nlped

The fenders are in really good shape, but as you can see from the pics, the PO did drill a couple of holes in them for aftermarket trailer style parking lights

and the passenger one will have holes in it from the upright where the awning hardware is mounted...

I'd ship, but I have no idea how much shipping would run...

They are very solid with no visible rust, even in the super common passenger front cup.

$65 each?

In line for the pr pending shipping to 48912 Business or Greyhound.

**nlped** · 10-13-2014, 08:30 AM

Quote:

Originally Posted by DaHos

In line for the pr pending shipping to 48912 Business or Greyhound.

Ok

Undone · 10-16-2014, 07:47 PM

Quote:

Originally Posted by nlped

The fenders are in really good shape, but as you can see from the pics, the PO did drill a couple of holes in them for aftermarket trailer style parking lights

and the passenger one will have holes in it from the upright where the awning hardware is mounted...

I'd ship, but I have no idea how much shipping would run...

They are very solid with no visible rust, even in the super common passenger front cup.

$65 each?

Payment sent.

**nlped** · 10-16-2014, 07:48 PM

Quote:

Originally Posted by Undone

Payment sent.

Got it... I'll get them off this weekend and get them out next week. PM me your shipping address.

Thanks

**jabborabbo** · 10-12-2014, 06:39 PM

Wipers/lights knobs/switches and heater/defroster control unit shipped to 75801?

Thanks!

**nlped** · 10-12-2014, 06:48 PM

Quote:

Originally Posted by jabborabbo

Wipers/lights knobs/switches and heater/defroster control unit shipped to 75801?

Thanks!

The wiper and headlight switches both work properly, and the heater control slides as it should.

$65 shipped?

**jabborabbo** · 10-12-2014, 07:01 PM

Quote:

Originally Posted by nlped

The wiper and headlight switches both work properly, and the heater control slides as it should.

$65 shipped?

Sounds good! PM me payment info!

**nlped** · 10-12-2014, 08:22 PM

Quote:

Originally Posted by jabborabbo

Wipers/lights knobs/switches and heater/defroster control unit shipped to 75801?

Thanks!

SOLD!!! Thanks Jere

10-12-2014, 05:27 PM	#1
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Part out of 1967 Open Road Camper Well after much diliberation, I've decided to part this one out. 1967 Chevrolet Open Road Campers INC motorhome. I'm keeping the motor, complete doors for another project, but most everything else is available. Lights, grille, any trim, brake & steering related pieces, TH400 trans, interior pieces etc. There are additional pictures in my "Chubby" build thread. Ask about pieces/parts here and I'll try and post pics as quickly as possible with a price. Thanks... All prices quoted are plus Paypal fees... Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha Last edited by nlped; 10-12-2014 at 06:48 PM.

10-12-2014, 05:29 PM	#2
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Part out of 1967 Open Road Camper I've sold the roof air, generator, and the awning... All windows, side door, rear sliding glass door are intact and functioning. So are the original camper interior propane lanterns by Humphrey. __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

10-12-2014, 05:46 PM	#3
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,106	Re: Part out of 1967 Open Road Camper Interested in the dash pad if original.

10-12-2014, 06:02 PM	#8
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: Part out of 1967 Open Road Camper Pics of gauge cluster.

10-12-2014, 06:11 PM	#10
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Part out of 1967 Open Road Camper This has a 4-speed high hump in it too __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

10-12-2014, 06:30 PM	#11
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 896	Re: Part out of 1967 Open Road Camper Condition and price of both fenders? Would you ship?

10-12-2014, 06:39 PM	#13
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,769	Re: Part out of 1967 Open Road Camper Seat belts and glovebox door? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-12-2014, 06:39 PM	#22
jabborabbo Senior Member Join Date: Apr 2013 Location: Podunk, Texas Posts: 752	Re: Part out of 1967 Open Road Camper Wipers/lights knobs/switches and heater/defroster control unit shipped to 75801? Thanks!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.