400 sbc and other parts

[Blue_71]

400 sbc shortblock "kit"
block: all new freeze plugs, one side clean enough to eat off of, gasket surfaces cleaned up, 4 of the cylinders have been honed, 2 bolt, includes main caps
(2 bolt is more desirable in the SBC 400, as the 4 bolt mains are weaker because of bolt placement)
pistons and rods: stock 400 bore and 5.625? rods
crank: stock main size, needs cleaned up and possibly turned, 3.75 stroke
flexplate: stock weighted
balancer: stock external balance
have a 350 crank that can be substituted in, but it for sure needs turned 010/010 (i had it checked)
$275 obo

292 chevy i6, mostly complete, unknown condition, got it in a trade but it has been put up in a building for about 6-7 years, $200 obo

70 chevy hood, no rust. i dont remember any dents last i looked at it. does have the outer chrome of the bowtie but no center $65

69 chevy hood bowtie, decent condition, center has been painted, $15

willing to trade for: 69-72 toolbox bed trim (little peice in front and rear of the box), right lower fender trim, 71/2 blue steering wheel, short water pump upper alt bracket, outter 71/2 4x4 front bumper brackets, 71 3 speed manual steering column, blue dash pad, blue 71 arm rest, 1969 green dash pad, 88-98 steering wheel, trailing arms, or make an offer (this goes for what i post tomarow also)

more to come tomarow! i have many more parts but i want to look them over and make a list of condition and price

if im out of line on any prices just make me an offer, im generally easy going and negotiable

[67mbsc]

Hey!!! I sent yall a PM about the 400

[Chevy Muscle]

Darn ... so far away.


What is the block casting number?

[Blue_71]

off the rear:
3951509

off the front:
F021ITLM
C71155801

i checked and both sides have been cleaned, but only one has been painted

[Chevy Muscle]

Put me in line for the 400.... if you are willing to ship it..... I'll need your zip so that I can check on shipping charges.

Is it standard bore, or has it been bored out already?

[Blue_71]

67 mbsc is checking on shipping to him, so your second in line

on the shipping, i'll make you the same deal as him. if you pay for all of it, pay for the materials for me to crate it, set up the shipment, and the company is decently close to me, i can do it if you dont care to be patient. i cant get things done quickly, but i also dont take forever. i would have to have time to get it all together and crated up before it was shipped.

my zip is glasgow, ky 42141.

the bore is still a virgin bore with no ridge, 4 cylinders are surface rusted but a finishing hone will clean them up just like it did the four i did.

[Inspector722]

I have the 88-98 leather wrapped steering wheel if you want one.Black spokes with dark blue leather wrap. Center horn button has the dark blue accent leather also.

[Blue_71]

how much do you want for the steering wheel inspector? i need a chevy center but if you dont have one i do...

heres some more of the stuff:
250 I6 re-ring kit, complete, never used, only opened to see what all it came with, $100 plus shipping

edelbrock chrome script valve covers, have had battery acid spilt on them, will clean up good for a beater or a driver with some sanding where it was spilt, $20 plus shipping

70 chevy grill, good driver condition imo $70

69-72 chevy black steel headlight bezels, $15

67-68 black headlight bezels, $20 sale pending

67-72 chrome wiper arms, no blades, $5 each

gauges and gauge bezels, $5-25 depending on what part, no tachs, no vac

powerglide CHROME gear indicator, came out of my 69 CST, will trade for TH350 gear indicator, preferbly also chrome

70 chevy left door, needs work on bottem, gutted, upper hinge needs some work $50

68 GMC right door, needs work on bottem, gutted, $60

[LUV2XCLR8]

DID YOU GET YOUR HOOD

[Blue_71]

sure did got it from eric on saturday at 9:30 am (i think he must think i like getting up early?? lol jk) its sitting in the back of my truck right now

[Inspector722]

$150 with horn button, $125 without horn button plus shipping. Or I am looking for a really nice 67 right front fender and inner fender.

[3quartertime]

Can I get shipping to 46158 on the valve covers?

Thanks.

[Blue_71]

i hate to but im gonna have to pass inspector, more then i can afford only fenders i have is a set off a 1970

3quartertime- for the valve cover shipping, giving myself a buck leway to be safe for guestimate weight and size, say $7 for shipping

[Blue_71]

ttt

[Inspector722]

Blue 71, What all do you have to rebuild a I6 250?

[Blue_71]

ive got:
standard size rod and main bearings
standard size ring set
full complete gasket kit, everythign all the way down to oil seals

ive got the parts in your signature also, $25 for oil pan, $20 for side plates, $15 for 12 bolt diff cover... all parts can be sandblasted for an extra fee

[Inspector722]

Are they steel or alum.?

[Chevy Muscle]

Take me out of line for the 400 sbc.

I'd love to have it, but by the time I pay shipping I would have too much into it.

Thanks

[Blue_71]

i assume you mean the oil pan, side plates and diff cover? they're all stock, so i guess steel

[CHEVYE]

dang josh, i sure would like to have that 400. lookin for any trades? i got alot of stuff.

[Blue_71]

pm sent to ya: atm your 2nd in line sence chevy muscle backed out.

[Blue_71]

Ttt

found a 6cyl HEI tonight, i think i have almost everything for it... only thing i think i may be missing, is the little tab that goes under the coil... cap and rotor looks good... $40 obo

[Blue_71]

ttt

[draino76]

This may be a dumb question but what the hell does ttt mean?

[Blue_71]

never a dumb question... ttt means to the top, which is a way of bringing your post back to the top of the page when you dont have any to say