![]() |
|
![]() |
#1 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Not another build thread! Progress on my '67
Well, I think everyone likes build threads, so it's about time I start my own.
Background: I bought the '67 in 1996 from my uncle. I lived in a rural town in southwest NY and my uncle drove the truck up from SC. He decided to sell it and not drive it back home. I paid $1,400 for it with new brakes and tires all the way around. I basically added a stereo, some speakers, replaced the heater core, sanded the body down, my dad sprayed it with a primer with clear, and I drove it when there was no snow on the ground for the next 2 1/2 years. It had the stock 250 six popper, 3 speed converted to the floor, and 3.73 rear. It sat for the next 3 1/2 years while I attended Clemson University in Clemson, SC. I lived with the same uncle who sold me the truck in columiba SC in the summers when I wasn't at school. He trailered the truck down from NY for me and that summer I began a mild rebuild. The 250 and 3spd were tossed in favor of a rebuilt 350 from advance (quit laughing it was only $700 and I still had a year of school left) and a junkyard 700R4. I also pirated a complete power disk brake set up from a 71 GMC at a local 'yard. The suspension was tore down, cleaned, painted, and ALL NEW parts installed: rotors, calipers, brake lines, pads, ball joints, tie rods, bushings, etc... I got it all back together and running and ran out of money but I got to drive it to my last year of college...untill the trans blew in late February 2004. 2 years later I FINALLY have the money to finish it. UNFORTUNATELY I live in an apartment complex in Greenville, SC (2 hours from where my unlces house, and the truck, are in columbia.) So I have to "plan" weekends to work on it. What I've done recently: Purchased goodmark doors and fenders coated/painted them inside and out (the backside) with eastwoods rust encapsulator and topped that off with a coating of truck bedliner. Got a nice rust free set of rear fenders, need to start cleaning them up. I've installed a set of split bench seats from a 93 silverado and added insulation to the cab floor. I've also installed new cab mounts. I hope to get it back on the road by July of this year in a coat of Maui Blue paint. I'll keep this thread open for progress. Enjoy.
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
#2 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Not another build thread! Progress on my '67
The motor used to look pretty. I took the truck "muddin" a couple times and never cleaned it. That will change when she is painted all pretty.
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
#3 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Not another build thread! Progress on my '67
Some work and some parts....
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
#4 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Not another build thread! Progress on my '67
More parts........
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
#5 |
Born To Lose Club
![]() Join Date: Feb 2003
Location: Calgary, Alberta/Oxenden, Ontario, Great White North
Posts: 13,306
|
Re: Not another build thread! Progress on my '67
Looks Good...Always room for another build thread!
__________________
Brian Smith ![]() 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154. |
![]() |
![]() |
![]() |
#6 |
Registered User
![]() Join Date: Feb 2004
Location: Idaho
Posts: 4,034
|
Re: Not another build thread! Progress on my '67
Lookin good, wow that was a new york truck?
__________________
"Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!" |
![]() |
![]() |
![]() |
#7 | |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Not another build thread! Progress on my '67
Quote:
Nope, not originally. It was built in the St. Lous plant and ended up in Brownsfield, Tx for a few years. It then somehow made its way to Columbia, SC. My uncle drove it to NY (with my aunt complaining how hot it was the whole way ![]() ![]()
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 03-14-2006 at 03:39 PM. |
|
![]() |
![]() |
![]() |
#8 |
Post Whore
Join Date: Aug 2005
Location: Owensboro KY
Posts: 11,905
|
Re: Not another build thread! Progress on my '67
Go man, get that thing looking good!
__________________
Drew '71 Chevy 350/TH350 Hugger Orange Currently just a rolling frame, body work soon to follow!!! Check out my Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=212927 Daily Driver: 1997 Chevrolet S-10 with more gears than pistons ![]() |
![]() |
![]() |
![]() |
#9 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Not another build thread! Progress on my '67
Got some more stuff done this weekend. I got some of the dents straighter in my new "used" 67 rear step fenders with a hammer and dolly. They are completely rust free, so I can't complain too much. I also stripped all of the old undercoating from the rear fenders with a chemical stripper (that was a nasty mess). I cleaned up and painted the radiator overflow bottle and I painted my ECE 6 lug rotors and ECE sway bar.
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Apr 2003
Location: NB
Posts: 3,367
|
Re: Not another build thread! Progress on my '67
Nice cab mounts.......man I need to do that........
Good stuff...It looks like your hooked now....
__________________
1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD |
![]() |
![]() |
![]() |
#11 | |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Not another build thread! Progress on my '67
Quote:
I've been hooked for years.... looks like college is finally paying off.... I have $$$ to work on my truck after 9 years of not having any ![]()
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
|
![]() |
![]() |
![]() |
#12 |
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,477
|
Re: Not another build thread! Progress on my '67
![]()
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
![]() |
![]() |
![]() |
#13 |
Post Whore
![]() Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,684
|
Re: Not another build thread! Progress on my '67
Looks like a great project, keep after it!
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
![]() |
![]() |
![]() |
#14 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Not another build thread! Progress on my '67
Picked up some bling bling (old skewl style!) from the charlotte auto fair for my '67. I hope to head to columbia on friday to get the fenders and doors installed and lined up properly. Just for information purposes, I bought the repop tailgate for $150. It weighed 23 pounds and my stock gate weighed 25 pounds. The metal looks thick and solid. I had to carry it about a mile and a half back to my truck (and no, I'm not exagerating).... I'm sore as heck today....
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 04-09-2006 at 05:33 PM. |
![]() |
![]() |
![]() |
#15 |
Senior Member
Join Date: Nov 2004
Location: Cleveland, Texas
Posts: 298
|
Re: Not another build thread! Progress on my '67
how'd the goodmark metal work for you? Does it fit good?
__________________
2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn) |
![]() |
![]() |
![]() |
#16 |
State of Confusion!
![]() ![]() Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,929
|
Re: Not another build thread! Progress on my '67
It's looking good there. So how do those seats ride for ya?
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
![]() |
![]() |
![]() |
#17 |
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,738
|
Re: Not another build thread! Progress on my '67
Nice project
![]() Nice load of chrome there! I love seeing nice parts in the house ![]() |
![]() |
![]() |
![]() |
#18 | |||
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Not another build thread! Progress on my '67
Quote:
Won't know until this weekend. Hopefully it will fit well ![]() Quote:
With only 2 gears the truck can't go too fast, but they feel nice riding around the yard! Quote:
![]() I had to stay away from the American Racing booth at the show.... I would have REALLY come home broke!
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
|||
![]() |
![]() |
![]() |
#19 |
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,738
|
Re: Not another build thread! Progress on my '67
My chassis, cab and FESM are in the garage. The Bed and everything else is in my basement
![]() |
![]() |
![]() |
![]() |
#20 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Not another build thread! Progress on my '67
I headed out to Columbia early friday morning to get some work done on the '67. After a 2 hour drive I fired "faith" up and drove her around to the garage. She purred like a kitten, even after sitting for almost a month. I dove right into work. Here's how she started friday:
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
#21 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Not another build thread! Progress on my '67
I cleaned up a few things.... I removed all of the old sealant from the cab with a wire wheel and then cleaned it up with some "rust encapsulator" and then put some new seam stuff back in. I also rebuilt the door hinges.
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
#22 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Not another build thread! Progress on my '67
Before mounting my new goodmark sheetmetal I spent a lot of time with eastwoods rust encapsulator painting every crevice on the backsides and insides of the doors and fenders. I then topped of the inside of the fenders with some truck bed coating and the inside of the doors with some rubberized undercoating. This was all done weeks ago so all I had to do this weekend was put the stuff on. I also rechecked my cab to make sure it didn't shift when I installed the new cab mounts. To my shock it was dead on! I WAS expecting to have to adjust it. That really made me happy. I also painted the front of the door jams and front of the doors with spray can blue because once this stuff is on, it's not coming back off! Don't forget to install new radiator support mounts!
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 04-16-2006 at 08:20 PM. |
![]() |
![]() |
![]() |
#23 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Not another build thread! Progress on my '67
On to the good stuff. The goodmark stuff. You can see from the pics that it all fit nicely in the end, what you don't see is the entire day I had to spend installing it to get it that way! I am happy with the fit and finish. I am confident others can get it to fit this nice too. I am NOT A BODY MAN, just a hobbyist with patience. How did I get this stuff to fit? IT DOES NOT FIT OUT OF THE BOX! I had to bend the window frames about a half inch out on both sides. I used the old 2x4 method (charlie did the same thing on the '56 for American Hot Rod). I also had to enlarge existing holes to get the fenders to fit where I wanted and use spacers. I also had to apply a few taps from a body hammer here and there as well. I did not have the time or energy to finish the hood and cowl install. I did this all by myself and was comepletely exhausted today. The hood and cowl (original pieces, NOT goodmark) are sitting in place and look like they will fit well with some play. Here are some pics of the fit I got, you be the judge on Goodmark quality.
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
#24 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Not another build thread! Progress on my '67
Some more.....
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
#25 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Not another build thread! Progress on my '67
The hardest part of the weekend to install
![]()
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
Bookmarks |
|
|