![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Mar 2005
Location: Arizona
Posts: 260
|
![]()
I am looking at a 69 Chevrolet (I think its a GMC because of the grill but its advertised as a Chevy. My question is, the owner says it has a 350 with a 4 speed manual. Any ideas on what kind of tranny, are they good, how can i tell if it is a 350 and determine tranny type/#? Also, isn't this rare or did they even make this combo in this year?
95 s320 01 Civic (yep, a rice burner) |
![]() |
![]() |
![]() |
#2 |
Questionable
Join Date: Mar 2005
Location: Atlanta
Posts: 13,376
|
I have a '69 3spd tranny in my '68 C-10. The numbers for the tranny are located on the driver's side. There are some pictures of the side plate and the tranny in my signature under "engine swap". I think if the side plate has 7-bolts, it's a Saginaw 3spd synchro'd. Post some pics, someone will tell you.
__________________
If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Feb 2003
Location: The Rubber City
Posts: 5,498
|
if its stock, its an SM465 truck 4 speed. although New Process 4 speeds were optional equipment, they are fairly uncommon. check the top cover, if its iron = 465, if its aluminum = NP435.
of course something else could have been swapped in over the years, but as far as stock, the above two are it.
__________________
1969 GMC K2500 ![]() 1996 Honda Accord 2007 Kawasaki KLR 650 |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2005
Location: Arizona
Posts: 260
|
Are both of those good, any major problems. I had a Turbo 400 in my 69 longbed w/350. I rebuilt the engine but never had to touch the tranny. Very reliable to me. This time I want a manual but don't know anything about them.
Thanks for the info above, I will try to check it out today. |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jan 2005
Location: Colorado Springs
Posts: 693
|
The M465 is a real strong transmission, very dependable and easy to rebuild. The rare NP435 is also a good/reliable transmission just not as strong.
__________________
1971 GMC K1500 SWB Fleetside, 4" skyjacker softride and, 14 Bolt FF, HD Dana 44 4.10's 1970 K5 TBI conversion lifted etc SOLD 1968 C20 camper truck SOLD “To ban guns because criminals use them is to tell the innocent and law-abiding that their rights and liberties depend not on their own conduct, but on the conduct of the guilty and the lawless.” Jeff Snyder |
![]() |
![]() |
![]() |
#6 |
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,450
|
Welcome to the board from South Mississippi!
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. ![]() We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
![]() |
![]() |
![]() |
Bookmarks |
|
|