How many of you guys actually "use" your trucks.....check me out!(pics) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Zumo · 03-26-2003, 10:29 AM

Here I am this past Sat. with a load of sod. That can't be good for the axle.

**1970 CST Short Wide** · 03-26-2003, 10:33 AM

I use mine, but not THAT hard. Ouch LOL

dubie · 03-26-2003, 10:34 AM

MAN!!! I wish i had taken a pic of my 72 hauling a load of black dirt 2 years ago. The load was so big, it snapped both my rear coils and my step bumper was dragging on the ground. My ball hitch got caught on the damn rail crossing when i was going over it

*Randy70C-10* · 03-26-2003, 10:56 AM

Good thing there wasn't a train coming.

Alvin · 03-26-2003, 11:20 AM

How much of a drop is that in the back?

mtdave2 · 03-26-2003, 11:21 AM

stllookn · 03-26-2003, 11:30 AM

Dave, ouch...and it isn't even squatting!!! That must be one stiff ride without a load...LOL!

Old Chevy · 03-26-2003, 11:44 AM

Yep, unfortunately dont have photo's, but have carried grit, turf (very heavy), decking lumbar , etc in the back of mine. If your not going to use it, then why have it?

Cheers

Richard

mtdave2 · 03-26-2003, 11:53 AM

oh ya she is squating, but just a bit.. its not at bad of a ride as you might think.. but if you want a smooth ride you need about 1000 pounds in the back

cdowns · 03-26-2003, 12:19 PM

YES I DO!!! it's my everyday only vehicle in the past year i've done 30thousand miles i've hauled loads of model A&T bodies around the east coast and from Tn. and N.J. just a couple of weeks ago my friends electra-glide broke down during bikeweek and we loaded it up and drove him to N.C. !!! she may not be pretty but she's ready willing and able to go anywhere,anytime hauling ass or hauling a load IT'S A TRUCK!!!!

Lippyp · 03-26-2003, 12:36 PM

Mine regularly hauls loads of rubbish to the dump, garden rubbish, rubble etc (we are in the process of renovating our house) The other day it had our old 1965 horrible green three piece bathroom suite in the back, cast iron bath (man those things are heavy, nearly ended up toboganning down the stairs behind it!) washbasin and toilet on their way to the dump. Wish I'd taken a picture of it, the only truck with en-suite facilities!

My justification to my wife for owning a truck with a thirsty V8 when gas is $5 a gallon here is that it works for a living as well as going to show etc.

Woody · 03-26-2003, 01:15 PM

Yea,
I use mine as a truck! My 69 has been in the basement for a couple of years but it has hauled many, many loads of mulch, lumber and anything else I need to haul. Even pulled my brothers 96 F150 to the repair shop once. Got a pic of that at the Stoplight in front of Kmart!! Has him showing me I'm number 1 !!!LOL!!! Great pic you can see the tow strap!

The 68 I got because I needed a truck while I was working on the 69, It has hauled a couple campers (thanks FINE69), ATVs, pinewood derby track, firewood and like the 69 anything I need to haul. They are TRUCKS after all!

**Yukon Jack** · 03-26-2003, 01:23 PM

Here's a loader scoop of sand. Squats the truck down a bit, the shackle definitely gets pushed back more.

**Yukon Jack** · 03-26-2003, 01:23 PM

The shackle view.

mrein3 · 03-26-2003, 02:32 PM

Every time I see a lowered truck I think why would somebody take a perfectly good, usable truck and turn it into a ricer.

I've built mine to haul my bass boat around but in the off season it gets used all the time...
if the salt isn't too bad.

RON WOODGEARD · 11-10-2004, 02:28 PM

Quote:

Originally Posted by mrein3

Every time I see a lowered truck I think why would somebody take a perfectly good, usable truck and turn it into a ricer.

I've built mine to haul my bass boat around but in the off season it gets used all the time...
if the salt isn't too bad.

A RICER !!!! What, you don't know what American Muscle Is ?? And where do you think the Ricers got the Idea to make em faster ??? American Muscle was around when Ricers were still in Diapers, trying to get a 4 cylinder to run smooth..

vfrdude · 03-26-2003, 02:58 PM

I don't buy into that line of reasoning. Being lowered doesn't necessarily mean that you can't haul anything. I've used my truck many times as a 'work' truck - I used to do side work working for a roofing contractor. Now I didn't do anything crazy, like throw scrapes off the roof into the back of the truck, but I did haul a fair amount of material around.

1969 GMC · 03-26-2003, 03:02 PM

I've only had my truck for a few months of winter, so I haven't had to really carry much. The only big thing I've carried is the huge cardboard box with a body kit in it for my friend's 92 Honda Prelude Si. But, my truck is a 3/4 ton with HD front and rear suspension and overloads for a reason, lol. And it sure ain't for the smooth ride

XXL · 03-26-2003, 04:46 PM

I think I found your "squat"

oldsub86 · 03-26-2003, 05:16 PM

Factory half leaf over load springs work well.

I must be doing something wrong. The photo does not show up - just the box with the red x - but if I right click on the box and tell it I want to see the picture, up it comes. Hope it works for others.

Zumo · 03-26-2003, 06:04 PM

I saw it, I right clicked and copied the url to the image into a new browser window and it came up. I don't think your image hosting site allows "image linking" on other site such as this one.

68CST327 · 03-26-2003, 06:29 PM

This thread reminds me I need to work on getting my C20 leveled out in the back

Maybe some 3" drop springs; now if only I could find a place that sells heavy duty 3/4 ton 3" drop springs...

Fred T · 03-26-2003, 06:41 PM

No pics, but one time I hauled 4300 lb of fill sand in my 74 1/2 ton. The loader just wouldn't stop dumping, and after I got of the scales I shoveled as much as I could to the front of the bed. Crawled home, about a mile & a half. Last year I was hauling topsoil, and it was $40 a pickup load. Had my 52 3/4 ton with the bed full, around 2 tons, going down the interstate at 40-45 mph. That was a ride.

**Palf70Step** · 03-26-2003, 10:05 PM

I didn't quite work mine like some of you folks did/do, but it does get used. Even when I get it back together it still going to be used as a truck.

Project1970 · 03-26-2003, 10:20 PM

Mine's lowered...I've personally never done any obscene amounts of hauling, but with ECE's 4" drop leaves, I've been able to still haul plenty of things just fine...loads of furniture, my THM400, tools...

Even as full as I've ever gotten it, it still drives fine and feels the same. I've never taken any pics of it loaded, but I don't think I've ever had any serious squat...

Last time it ever did have any serious squat, the exhaust pipe hit the brake line and the rear brakes went out with a full load and some of manure in the bed! And that was with the original leaves...

03-26-2003, 10:29 AM	#1
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	How many of you guys actually "use" your trucks.....check me out!(pics) Here I am this past Sat. with a load of sod. That can't be good for the axle. __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles

03-26-2003, 10:33 AM	#2
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,165	I use mine, but not THAT hard. Ouch LOL __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

03-26-2003, 10:34 AM	#3
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	MAN!!! I wish i had taken a pic of my 72 hauling a load of black dirt 2 years ago. The load was so big, it snapped both my rear coils and my step bumper was dragging on the ground. My ball hitch got caught on the damn rail crossing when i was going over it __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

03-26-2003, 11:20 AM	#5
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	How much of a drop is that in the back? __________________ Ethel - The Legend Continues... Ethel has been sold.

03-26-2003, 11:21 AM	#6
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	Attached Images __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

03-26-2003, 10:56 AM	#4
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Good thing there wasn't a train coming.

03-26-2003, 11:30 AM	#7
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Dave, ouch...and it isn't even squatting!!! That must be one stiff ride without a load...LOL! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

03-26-2003, 11:44 AM	#8
Old Chevy Registered User Join Date: Jan 2000 Location: Tulsa, Oklahoma Posts: 498	Yep, unfortunately dont have photo's, but have carried grit, turf (very heavy), decking lumbar , etc in the back of mine. If your not going to use it, then why have it? Cheers Richard __________________ Broken Arrow, OK. 1977 Corvette, ZZ4 Crate, new interior, new suspension, new driveline, you get the picture, (new project / daily driver)

03-26-2003, 11:53 AM	#9
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	oh ya she is squating, but just a bit.. its not at bad of a ride as you might think.. but if you want a smooth ride you need about 1000 pounds in the back __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

03-26-2003, 12:19 PM	#10
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	YES I DO!!! it's my everyday only vehicle in the past year i've done 30thousand miles i've hauled loads of model A&T bodies around the east coast and from Tn. and N.J. just a couple of weeks ago my friends electra-glide broke down during bikeweek and we loaded it up and drove him to N.C. !!! she may not be pretty but she's ready willing and able to go anywhere,anytime hauling ass or hauling a load IT'S A TRUCK!!!! __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

03-26-2003, 12:36 PM	#11
Lippyp English Chevy Owner Join Date: May 2002 Location: Shropshire, UK/ Lot, France Posts: 1,848	Mine regularly hauls loads of rubbish to the dump, garden rubbish, rubble etc (we are in the process of renovating our house) The other day it had our old 1965 horrible green three piece bathroom suite in the back, cast iron bath (man those things are heavy, nearly ended up toboganning down the stairs behind it!) washbasin and toilet on their way to the dump. Wish I'd taken a picture of it, the only truck with en-suite facilities! My justification to my wife for owning a truck with a thirsty V8 when gas is $5 a gallon here is that it works for a living as well as going to show etc. __________________ Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission

03-26-2003, 01:15 PM	#12
Woody Registered User Join Date: Feb 2000 Location: Georgetown, KY, USA Posts: 631	Yea, I use mine as a truck! My 69 has been in the basement for a couple of years but it has hauled many, many loads of mulch, lumber and anything else I need to haul. Even pulled my brothers 96 F150 to the repair shop once. Got a pic of that at the Stoplight in front of Kmart!! Has him showing me I'm number 1 !!!LOL!!! Great pic you can see the tow strap! The 68 I got because I needed a truck while I was working on the 69, It has hauled a couple campers (thanks FINE69), ATVs, pinewood derby track, firewood and like the 69 anything I need to haul. They are TRUCKS after all!

03-26-2003, 01:23 PM	#13
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Here's a loader scoop of sand. Squats the truck down a bit, the shackle definitely gets pushed back more. Attached Images __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

03-26-2003, 01:23 PM	#14
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	The shackle view. Attached Images __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

03-26-2003, 02:32 PM	#15
mrein3 Registered User Join Date: Feb 2000 Location: Center City, MN, USA Posts: 3,253	Every time I see a lowered truck I think why would somebody take a perfectly good, usable truck and turn it into a ricer. I've built mine to haul my bass boat around but in the off season it gets used all the time... if the salt isn't too bad. __________________ '70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN



Register or Log In To remove these advertisements.

03-26-2003, 02:58 PM	#17
vfrdude Registered User Join Date: May 2002 Location: Oakley, Ca. USA Posts: 137	I don't buy into that line of reasoning. Being lowered doesn't necessarily mean that you can't haul anything. I've used my truck many times as a 'work' truck - I used to do side work working for a roofing contractor. Now I didn't do anything crazy, like throw scrapes off the roof into the back of the truck, but I did haul a fair amount of material around. __________________ Rudy Fierros '95 Honda VFR750F Used to have a '71 Chevy Stepside, Guards Red, Lowered 4" rear, 3" front, White Oak bed wood, 700R4 w/373 gears until some low life stole it!

03-26-2003, 03:02 PM	#18
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	I've only had my truck for a few months of winter, so I haven't had to really carry much. The only big thing I've carried is the huge cardboard box with a body kit in it for my friend's 92 Honda Prelude Si. But, my truck is a 3/4 ton with HD front and rear suspension and overloads for a reason, lol. And it sure ain't for the smooth ride __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

03-26-2003, 04:46 PM	#19
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	I think I found your "squat" Attached Images __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

03-26-2003, 05:16 PM	#20
oldsub86 Registered User Join Date: Dec 2002 Location: Canada Posts: 695	Factory half leaf over load springs work well. I must be doing something wrong. The photo does not show up - just the box with the red x - but if I right click on the box and tell it I want to see the picture, up it comes. Hope it works for others. __________________ 1968 Chevy - 292 with a powerglide Last edited by oldsub86; 03-26-2003 at 05:22 PM.

03-26-2003, 06:04 PM	#21
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	I saw it, I right clicked and copied the url to the image into a new browser window and it came up. I don't think your image hosting site allows "image linking" on other site such as this one. __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles Last edited by Zumo; 03-27-2003 at 12:36 PM.

03-26-2003, 06:29 PM	#22
68CST327 Registered User Join Date: Aug 2002 Location: USA Posts: 443	This thread reminds me I need to work on getting my C20 leveled out in the back Maybe some 3" drop springs; now if only I could find a place that sells heavy duty 3/4 ton 3" drop springs...

03-26-2003, 06:41 PM	#23
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	No pics, but one time I hauled 4300 lb of fill sand in my 74 1/2 ton. The loader just wouldn't stop dumping, and after I got of the scales I shoveled as much as I could to the front of the bed. Crawled home, about a mile & a half. Last year I was hauling topsoil, and it was $40 a pickup load. Had my 52 3/4 ton with the bed full, around 2 tons, going down the interstate at 40-45 mph. That was a ride. __________________ Fred There is no such thing as too much cam...just not enough engine.

03-26-2003, 10:05 PM	#24
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	I didn't quite work mine like some of you folks did/do, but it does get used. Even when I get it back together it still going to be used as a truck. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

03-26-2003, 10:20 PM	#25
Project1970 14.1 @ 96MPH Join Date: Jul 2001 Location: Mesa, AZ Posts: 2,811	Mine's lowered...I've personally never done any obscene amounts of hauling, but with ECE's 4" drop leaves, I've been able to still haul plenty of things just fine...loads of furniture, my THM400, tools... Even as full as I've ever gotten it, it still drives fine and feels the same. I've never taken any pics of it loaded, but I don't think I've ever had any serious squat... Last time it ever did have any serious squat, the exhaust pipe hit the brake line and the rear brakes went out with a full load and some of manure in the bed! And that was with the original leaves... __________________ Project1970 - LS1 Swap Complete!

Register or Log In To remove these advertisements.