IN Front tach/vac tins - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyMetalChevy · 06-05-2012, 08:43 PM

Nice I have a surplus of reg tacs and this one tach/vac setup. These tachs were punched by a professional dye and press. The bare metal is filed. no sharp edges...

[B]$51 dollars shipped[/B] OBO these do not come up for sale individually very often.

HeavyMetalChevy · 06-05-2012, 08:56 PM

Will cut deals on bulk.. I have about 2 dozen tach tins in stock now.

**gmc 2500 4x4** · 06-05-2012, 09:13 PM

i'll take one 40.00 shipped<<<my offer thanx

**1972BackInBlackC10** · 06-05-2012, 09:18 PM

i'll take the tac and vac tin

HeavyMetalChevy · 06-05-2012, 09:28 PM

Quote:

Originally Posted by 1972BackInBlackC10

i'll take the tac and vac tin

You got it.. I have some nice tach resto's coming up since I ran across a surplus of tins.

**1972BackInBlackC10** · 06-05-2012, 09:32 PM

thanks! and nice find i dont know where you guys find that stuff lol was that your only vac/tach tin?

HeavyMetalChevy · 06-05-2012, 09:28 PM

Quote:

Originally Posted by gmc 2500 4x4

i'll take one 40.00 shipped<<<my offer thanx

I might go that on the tachs... The tac/vac combos are really scarce and most will not even part with them. Look up the kit prices repop. And tins are not sold individually. You have to buy the whole kit.

71swb4x4 · 06-05-2012, 09:33 PM

Is that a stock tach tin or is that a punched non-tach tin? Not trying to poop on your thread, the tach hole looks a little different in the photo, may just be the photo though. The curves look more rounded and the edge looks cut.

HeavyMetalChevy · 06-05-2012, 09:41 PM

Quote:

Originally Posted by 71swb4x4

Is that a stock tach tin or is that a punched non-tach tin? Not trying to poop on your thread, the tach hole looks a little different in the photo, may just be the photo though. The curves look more rounded and the edge looks cut.

No it is punched.. You can tell by the slots around the outside as well. I thought I put that in original post. will do... The roll is exactly the same though. It was made by a professional dye and press.

PT'S 70 CST · 06-05-2012, 09:39 PM

That tin has been punched out. The hole is offset more rounded and you can see bare metal on the back side.

PT

HeavyMetalChevy · 06-05-2012, 09:42 PM

Quote:

Originally Posted by PT'S 70 CST

That tin has been punched out. The hole is offset more rounded and you can see bare metal on the back side.

PT

the hole is not more rounded just shadowing.

shawno72 · 06-05-2012, 09:43 PM

...
Posted via Mobile Device

HeavyMetalChevy · 06-05-2012, 10:01 PM

Quote:

Originally Posted by shawno72

...
Posted via Mobile Device

come again??? roger that??

HeavyMetalChevy · 06-05-2012, 10:28 PM

Most people should know that ALL of the top gauge holes are offset.. Not dead center...

And here you go... a stocker

HeavyMetalChevy · 06-05-2012, 10:41 PM

and here are some mock-ups

HeavyMetalChevy · 06-05-2012, 11:32 PM

and this

jeremiah king · 06-09-2012, 12:24 AM

looks good. I always wanted to find time to do this.

06-05-2012, 08:43 PM	#1
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Front tach/vac tins Nice I have a surplus of reg tacs and this one tach/vac setup. These tachs were punched by a professional dye and press. The bare metal is filed. no sharp edges... [B]$51 dollars shipped[/B] OBO these do not come up for sale individually very often. Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog Last edited by HeavyMetalChevy; 06-05-2012 at 09:43 PM.

06-05-2012, 08:56 PM	#2
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Front tach/vac tins Will cut deals on bulk.. I have about 2 dozen tach tins in stock now. __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

06-05-2012, 09:13 PM	#3
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,958	Re: Front tach/vac tins i'll take one 40.00 shipped<<<my offer thanx

06-05-2012, 09:18 PM	#4
1972BackInBlackC10 Senior Member Join Date: Jan 2012 Location: Estevan, Saskatchewan Posts: 1,025	Re: Front tach/vac tins i'll take the tac and vac tin

06-05-2012, 09:32 PM	#6
1972BackInBlackC10 Senior Member Join Date: Jan 2012 Location: Estevan, Saskatchewan Posts: 1,025	Re: Front tach/vac tins thanks! and nice find i dont know where you guys find that stuff lol was that your only vac/tach tin?

06-05-2012, 09:33 PM	#8
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Front tach/vac tins Is that a stock tach tin or is that a punched non-tach tin? Not trying to poop on your thread, the tach hole looks a little different in the photo, may just be the photo though. The curves look more rounded and the edge looks cut. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

06-05-2012, 09:39 PM	#10
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Front tach/vac tins That tin has been punched out. The hole is offset more rounded and you can see bare metal on the back side. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

06-05-2012, 09:43 PM	#12
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Front tach/vac tins ... Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

06-05-2012, 10:28 PM	#14
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Front tach/vac tins Most people should know that ALL of the top gauge holes are offset.. Not dead center... And here you go... a stocker Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

06-05-2012, 10:41 PM	#15
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Front tach/vac tins and here are some mock-ups Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

06-05-2012, 11:32 PM	#16
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Front tach/vac tins and this Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

06-09-2012, 12:24 AM	#17
jeremiah king Registered User Join Date: Apr 2008 Location: Julian, CA Posts: 696	Re: Front tach/vac tins looks good. I always wanted to find time to do this. __________________ Specializing in OEM 67-72 Chevy & GMC parts since 2001 1969 GMC Longhorn 396 1969 Chevy 3/4 ton LWB 396 1983 Toyota pickup 22R 2012 Toyota Scion Xb



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.