Got Rust? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevyman63 · 06-19-2007, 10:49 AM

I DO.

These are my before pics, I've got another tub and an extra firewall, but have to become a metal surgeon to put it all together.

And so the saga begins.....

Drivers side...WOW!

Pass. side is much better...yeah right.

This is gonna be great!

**Yukon Jack** · 06-19-2007, 10:58 AM

Yikes! Good luck with getting it cut out and replaced.

RustyParts · 06-19-2007, 11:21 AM

I feel your pain.

Chevyman63 · 06-19-2007, 11:29 AM

Quote:

Originally Posted by RustyParts

I feel your pain.

I can only hope mine turns out as nice as yours has!

crzngmychvy · 06-19-2007, 11:57 AM

vtblazer · 06-19-2007, 12:56 PM

Pics of the donor truck?

Lots of threads on the board to work from/gather info.

2nd link in my siggy will show one way to graft on a windshield frame.

Post up your question's, we're here for ya.

**jaros44sr** · 06-19-2007, 05:01 PM

Quote:

Originally Posted by Chevyman63

I DO.

These are my before pics, I've got another tub and an extra firewall, but have to become a metal surgeon to put it all together.

And so the saga begins.....

This is gonna be great!

Dude, that is totally freakin' ugly, oh the flashbacks. Mine ends and yours begins. Watch the lower 'A' post and kick panel, I had serious problems there. Ended up making my own rocker backing plate to get the rocker low enuff to get the door to fit rite...

Have fun and post up lots of pics!!! So you musta got the sons 'vette done... J.

Chevyman63 · 06-19-2007, 08:25 PM

Quote:

Originally Posted by jaros44

Dude, that is totally freakin' ugly, oh the flashbacks. Mine ends and yours begins. Watch the lower 'A' post and kick panel, I had serious problems there. Ended up making my own rocker backing plate to get the rocker low enuff to get the door to fit rite...

Have fun and post up lots of pics!!! So you musta got the sons 'vette done... J.

The vette is ready to go to the painter, not close to done, but the boy is gone for the summer and then off to college and OBVIOUSLY I've got my hands full with this one, so Don the painter will take it from here.
BTW, how is progress on your Jimmy going?

RED72blazer · 06-19-2007, 09:20 PM

Quote:

Originally Posted by LUV2XCLR8

So does that tub pictured have a good rear floor?

Quote:

Originally Posted by Chevyman63

It has the usual rust...do you know someone that needs a floor section?

he is looking for one, IIRC.

LUV2XCLR8 · 06-19-2007, 09:57 PM

Quote:

Originally Posted by RED72blazer

he is looking for one, IIRC.

Correct

Quote:

Originally Posted by missilekounty

don't forget that goodmark sells complete floor pan assemblys for our trucks now.

Front yes, not the rear

**jaros44sr** · 06-20-2007, 05:53 AM

Quote:

Originally Posted by Chevyman63

The vette is ready to go to the painter, not close to done, but the boy is gone for the summer and then off to college and OBVIOUSLY I've got my hands full with this one, so Don the painter will take it from here.
BTW, how is progress on your Jimmy going?

It now has 2 swinging doors and floors, just have to finish up some welding and reassemble. will post up pics soon. Good luck with the project, I'll send you some cut proof gloves... J.

blazer bill · 01-23-2008, 09:15 AM

Man I Thought My Rocker Panels And Floor Pans Were Bad .the Worst Rust I Had On My 72 Blazer Was The Left Bed Side And The Hood.

LUV2XCLR8 · 06-19-2007, 05:03 PM

Quote:

Originally Posted by Chevyman63

I've got another tub and an extra firewall

So does that tub pictured have a good rear floor?

Chevyman63 · 06-19-2007, 07:31 PM

Quote:

Originally Posted by LUV2XCLR8

So does that tub pictured have a good rear floor?

It has the usual rust...do you know someone that needs a floor section?

missilekounty · 06-19-2007, 07:54 PM

don't forget that goodmark sells complete floor pan assemblys for our trucks now.

Chevyman63 · 06-20-2007, 10:07 PM

Quote:

Originally Posted by LUV2XCLR8

So does that tub pictured have a good rear floor?

Hey Luv, how much do you need? I checked it out tonight and found that the center looks pretty good, straight and no rust, but the outsides are wasted.
Let me know.

LUV2XCLR8 · 12-30-2007, 03:57 AM

Quote:

Originally Posted by Chevyman63

Hey Luv, how much do you need? I checked it out tonight and found that the center looks pretty good, straight and no rust, but the outsides are wasted.
Let me know.

TVM, But I need a complete floor

70rs/ss · 06-19-2007, 05:43 PM

Wow, I will never ever complain about my dime and nickle sized holes ever!!! I would walk right by those Blazers (Sorry, I do not mean to be rude). I am a certified welder and my skills are good (Not like some of the masters here, but I am into steel not sheetmetal, big difference!) and I'd still run away.

NONHOG · 06-19-2007, 06:05 PM

Aw pchssssit that'll buff out !

**jaros44sr** · 06-19-2007, 06:27 PM

Quote:

Originally Posted by 70rs/ss

Wow, I will never ever complain about my dime and nickle sized holes ever!!! I would walk right by those Blazers (Sorry, I do not mean to be rude). I am a certified welder and my skills are good (Not like some of the masters here, but I am into steel not sheetmetal, big difference!) and I'd still run away.

semperfidoordie · 06-19-2007, 08:11 PM

I feel your pain too

FRENCHBLUE72 · 06-19-2007, 09:27 PM

Makes my rust look good... Keep us posted as we know you can do it..

FarmTruk · 06-19-2007, 10:06 PM

I feel lucky...this is as bad as FarmTruk has anywhere...

hgs_notes · 06-19-2007, 10:38 PM

Mines worse...

I'm not proud of that, but I know this is not a restoration project. My new floor will likely be diamond plate from the firewall to the tailgate.

Good luck with your project.

florida4x4 · 06-19-2007, 10:57 PM

Guys, I have been there, done that and I thought I was crazy. Good to see I'm in good company!

06-19-2007, 10:49 AM	#1
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Got Rust? I DO. These are my before pics, I've got another tub and an extra firewall, but have to become a metal surgeon to put it all together. And so the saga begins..... Drivers side...WOW! Pass. side is much better...yeah right. This is gonna be great! __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

06-19-2007, 10:58 AM	#2
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Re: Got Rust? Yikes! Good luck with getting it cut out and replaced. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

06-19-2007, 11:21 AM	#3
RustyParts Registered User Join Date: May 2006 Location: Wyman, Kentucky Posts: 403	Re: Got Rust? I feel your pain. Attached Images __________________ 1972 GMC Jimmy, 4WD, 454 CI, 350 Turbo, 4" lift, 35" tires The math teacher said my son "Bubba" could be a mathmatical genius. cause he's got 13 fingers!

06-19-2007, 11:57 AM	#5
crzngmychvy "1972 C5" Join Date: Jul 2004 Location: SoCal Posts: 729	Re: Got Rust? __________________ - 72 2wd Blazer ...sold... 2wd Blazer Page

06-19-2007, 12:56 PM	#6
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Re: Got Rust? Pics of the donor truck? Lots of threads on the board to work from/gather info. 2nd link in my siggy will show one way to graft on a windshield frame. Post up your question's, we're here for ya. Last edited by vtblazer; 06-19-2007 at 12:57 PM.

01-23-2008, 09:15 AM	#12
blazer bill Registered User Join Date: Jan 2008 Location: indian mound tn. Posts: 16	Re: Got Rust? Man I Thought My Rocker Panels And Floor Pans Were Bad .the Worst Rust I Had On My 72 Blazer Was The Left Bed Side And The Hood.

06-19-2007, 07:54 PM	#15
missilekounty Registered User Join Date: Jun 2007 Location: pittsfield NH Posts: 15	Re: Got Rust? don't forget that goodmark sells complete floor pan assemblys for our trucks now.

06-19-2007, 05:43 PM	#18
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: Got Rust? Wow, I will never ever complain about my dime and nickle sized holes ever!!! I would walk right by those Blazers (Sorry, I do not mean to be rude). I am a certified welder and my skills are good (Not like some of the masters here, but I am into steel not sheetmetal, big difference!) and I'd still run away.

06-19-2007, 06:05 PM	#19
NONHOG Registered User Join Date: Feb 2007 Location: Marana, Arizona Posts: 3,446	Re: Got Rust? Aw pchssssit that'll buff out ! __________________ "I feel the need for speed!"... as soon as I am done with my nap.

06-19-2007, 08:11 PM	#21
semperfidoordie Fix It Till It's Broke Join Date: Apr 2007 Location: 29 Palms, CA Posts: 1,616	Re: Got Rust? I feel your pain too __________________ Tony Black Beauty: 85 C-10 SOLD! Great White: 69 LWB Custom Camper/20 SOLD! Blue Dragon: 72 K-10 SOLD! The Tank 77 K-10 KIA panhandler62: Just don't search for "trannys" no matter how hard yours shifts -- you just won't get what you are looking for. I Made The Official So Cal Board Meet Last edited by semperfidoordie; 06-19-2007 at 08:14 PM.

06-19-2007, 09:27 PM	#22
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Got Rust? Makes my rust look good... Keep us posted as we know you can do it.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-19-2007, 10:06 PM	#23
FarmTruk In Memoriam... Join Date: Nov 2006 Location: Wallburg, NC Posts: 1,216	Re: Got Rust? I feel lucky...this is as bad as FarmTruk has anywhere... __________________ '68 C10 SWB 307ci 2BBL *FarmTruk Pics Here* *"You know, doing what is right is easy. The problem is knowing what is right."*

06-19-2007, 10:38 PM	#24
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Got Rust? Mines worse... I'm not proud of that, but I know this is not a restoration project. My new floor will likely be diamond plate from the firewall to the tailgate. Good luck with your project. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

06-19-2007, 10:57 PM	#25
florida4x4 Registered User Join Date: Dec 2002 Location: tally FL Posts: 74	Re: Got Rust? Guys, I have been there, done that and I thought I was crazy. Good to see I'm in good company! __________________ 1972 GMC Jimmy - 383SBC \| TH350-NP203-NP205 \| D60PL \| 14FF Detroit \| 42 TSL's \| 4Xeyes \| Heavy FOotE "Trail in. Trash out." Florida4x4 dot Com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.