MN 1967 chevy truck parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 07-15-2012, 12:14 PM

Knobs and 57" choke cable. *sold*
Nice horn button and parts. *sold*
Ash tray. $10
67 outer handles with pitting, but work good. *sold*
67 inner handles. One knob is loose but still works fine. $25
Heater control with cables. Face is a little loose, no broken arms. $60
Rearview mirror. Arm is nice, mirror head could be replaced, not real nice. *sold*
Vent handles. $10
Hood letters with all nuts and studs intact. Minor pitting. *Sold*
Tail and BU lenses. pretty decent shape for 45 years old. Some overspray on the edges. *sold*
Gauge cluster in nice shape. One small crack on left screw hole. One of the nicer ones i have seen on both sides. $80*SOLD*
Door panels that WERE perfect until one screw stripped out on each one so i had to pull the screws through. Now they will need a little work on the screw hole below the crank holes on each one. These are arm rest delete panels. $35
GM door foil tags. One has tape residue on it but should clean up better. $15

All parts are PLUS shipping. I will try to combine and use flat rate boxes when i can.
The truck also had a very nice original bench seat with no damage that i saw. If someone close is interested let me know ASAP and i will try to get it before the crusher does. Probably about $100 for the seat.
I prefer money orders, but will accept paypal.

**too much stuff** · 07-15-2012, 12:18 PM

More pics

**too much stuff** · 07-15-2012, 12:22 PM

Just ask if you need more pics of anything.

**too much stuff** · 07-15-2012, 12:25 PM

One door panel won't need much, and the backs are clean also.

Last pics. Show any interest in the thread...

jwodahl · 07-15-2012, 02:39 PM

i could always use a good armrest.. lol

C10 Truckman · 07-18-2012, 09:18 PM

Quote:

Originally Posted by too much stuff

Just ask if you need more pics of anything.

Not sure of how you buy something but I'm interested in your gauge dash.
Posted via Mobile Device

**too much stuff** · 07-18-2012, 09:49 PM

Quote:

Originally Posted by C10 Truckman

Not sure of how you buy something but I'm interested in your gauge dash.
Posted via Mobile Device

PM sent.

List has been updated...

**too much stuff** · 07-18-2012, 09:57 PM

Someone need to save this seat!!!!
Truck will probably be squished in a day or 2...

sflem61 · 07-18-2012, 10:02 PM

got my letters , installed and looking good, thanks for the deal

mahanian · 07-15-2012, 03:33 PM

I'll take the outer handles pending a picture of the bottoms and if you'll take $25 shipped priority mail. You should be able to fit them in a $5.20 small flat rate box, I shipped a set in the past this way.

**too much stuff** · 07-15-2012, 03:46 PM

Quote:

Originally Posted by jwodahl

i could always use a good armrest.. lol

Quote:

Originally Posted by mahanian

I'll take the outer handles pending a picture of the bottoms and if you'll take $25 shipped priority mail. You should be able to fit them in a $5.20 small flat rate box, I shipped a set in the past this way.

If it would have had armrests, i would have taken them...

mahanian, i can get a pic later if you like. The bottoms have less pitting and some paint overspray. Price will work if they both fit the flat rate box.

projectjimmie68 · 07-15-2012, 04:34 PM

Do you have any tail light trim for a 67 or 68? Thanks

duallyjams · 07-15-2012, 05:27 PM

Interested in the back up lenses , can take a close up pic.

**too much stuff** · 07-15-2012, 06:15 PM

Quote:

Originally Posted by projectjimmie68

Do you have any tail light trim for a 67 or 68? Thanks

Nothing at the moment.

Quote:

Originally Posted by duallyjams

Interested in the back up lenses , can take a close up pic.

Backup lenses are drivers. I can get a better pic later if you still want.

Pic of bottom of handles and cleaned up one tag some...

ScottG · 07-15-2012, 07:06 PM

I would like the horn button and parts.

sflem61 · 07-15-2012, 07:49 PM

i would like hood letters. please send me total to 39702, i would like to do paypal

**too much stuff** · 07-15-2012, 08:33 PM

Quote:

Originally Posted by ScottG

I would like the horn button and parts.

Quote:

Originally Posted by sflem61

i would like hood letters. please send me total to 39702, i would like to do paypal

PMs sent...

duallyjams · 07-16-2012, 06:59 AM

It just depends on how many and how deep the cracks are.

tac106842 · 07-16-2012, 11:06 AM

I will take the door handles if mahanian backs out!

mahanian · 07-16-2012, 11:37 AM

I'm just waiting to hear confirmation that they fit in the priority mail small flat rate box

Mayo · 07-16-2012, 07:28 PM

I am interested in the cluster, but would you sell just the face?

**too much stuff** · 07-16-2012, 10:19 PM

Quote:

Originally Posted by duallyjams

It just depends on how many and how deep the cracks are.

Quote:

Originally Posted by mahanian

I'm just waiting to hear confirmation that they fit in the priority mail small flat rate box

Quote:

Originally Posted by Mayo

I am interested in the cluster, but would you sell just the face?

dually, these are actually pretty decent lenses.

mahanian, yes they fit fine.

Mayo, not breaking this one up. Sorry.

duallyjams · 07-16-2012, 10:53 PM

look good to me pm on its way

mahanian · 07-17-2012, 04:12 PM

Payment sent for the outer door handles

19673ontree · 07-17-2012, 04:36 PM

I will take the rear view mirror and bracket , PM me your paypal address and total pleas

07-15-2012, 12:14 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,713	1967 chevy truck parts Knobs and 57" choke cable. sold Nice horn button and parts. sold Ash tray. $10 67 outer handles with pitting, but work good. sold 67 inner handles. One knob is loose but still works fine. $25 Heater control with cables. Face is a little loose, no broken arms. $60 Rearview mirror. Arm is nice, mirror head could be replaced, not real nice. sold Vent handles. $10 Hood letters with all nuts and studs intact. Minor pitting. Sold Tail and BU lenses. pretty decent shape for 45 years old. Some overspray on the edges. sold Gauge cluster in nice shape. One small crack on left screw hole. One of the nicer ones i have seen on both sides. $80SOLD Door panels that WERE perfect until one screw stripped out on each one so i had to pull the screws through. Now they will need a little work on the screw hole below the crank holes on each one. These are arm rest delete panels. $35 GM door foil tags. One has tape residue on it but should clean up better. $15 All parts are PLUS shipping. I will try to combine and use flat rate boxes when i can. The truck also had a very nice original bench seat with no damage that i saw. If someone close is interested let me know ASAP and i will try to get it before the crusher does. Probably about $100 for the seat. I prefer money orders, but will accept paypal. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto Last edited by too much stuff; 11-14-2012 at 11:22 PM.

07-15-2012, 12:18 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,713	Re: 1967 chevy truck parts More pics Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

07-15-2012, 12:22 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,713	Re: 1967 chevy truck parts Just ask if you need more pics of anything. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

07-15-2012, 12:25 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,713	Re: 1967 chevy truck parts One door panel won't need much, and the backs are clean also. Last pics. Show any interest in the thread... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

07-15-2012, 02:39 PM	#5
jwodahl Registered User Join Date: Jun 2012 Location: crosby, tx Posts: 114	Re: 1967 chevy truck parts i could always use a good armrest.. lol

07-18-2012, 09:57 PM	#8
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,713	Re: 1967 chevy truck parts Someone need to save this seat!!!! Truck will probably be squished in a day or 2... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

07-18-2012, 10:02 PM	#9
sflem61 Registered User Join Date: Dec 2010 Location: columbus,ms Posts: 108	Re: 1967 chevy truck parts got my letters , installed and looking good, thanks for the deal

07-15-2012, 03:33 PM	#10
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 1967 chevy truck parts I'll take the outer handles pending a picture of the bottoms and if you'll take $25 shipped priority mail. You should be able to fit them in a $5.20 small flat rate box, I shipped a set in the past this way. __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

07-15-2012, 04:34 PM	#12
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: 1967 chevy truck parts Do you have any tail light trim for a 67 or 68? Thanks

07-15-2012, 05:27 PM	#13
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 1967 chevy truck parts Interested in the back up lenses , can take a close up pic. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

07-15-2012, 07:06 PM	#15
ScottG Registered User Join Date: Feb 2012 Location: Ventura,Ca Posts: 745	Re: 1967 chevy truck parts I would like the horn button and parts. __________________ '67 C20 LBW

07-15-2012, 07:49 PM	#16
sflem61 Registered User Join Date: Dec 2010 Location: columbus,ms Posts: 108	Re: 1967 chevy truck parts i would like hood letters. please send me total to 39702, i would like to do paypal

07-16-2012, 06:59 AM	#18
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 1967 chevy truck parts It just depends on how many and how deep the cracks are. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

07-16-2012, 11:06 AM	#19
tac106842 Registered User Join Date: Mar 2010 Location: Van Buren, ohio Posts: 69	Re: 1967 chevy truck parts I will take the door handles if mahanian backs out!

07-16-2012, 11:37 AM	#20
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 1967 chevy truck parts I'm just waiting to hear confirmation that they fit in the priority mail small flat rate box __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS



Register or Log In To remove these advertisements.

07-16-2012, 07:28 PM	#21
Mayo Cool Truck Join Date: Dec 2008 Location: Bowie,MD Posts: 1,869	Re: 1967 chevy truck parts I am interested in the cluster, but would you sell just the face? __________________ 1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed

07-16-2012, 10:53 PM	#23
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 1967 chevy truck parts look good to me pm on its way __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

07-17-2012, 04:12 PM	#24
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 1967 chevy truck parts Payment sent for the outer door handles __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

07-17-2012, 04:36 PM	#25
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	Re: 1967 chevy truck parts I will take the rear view mirror and bracket , PM me your paypal address and total pleas __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC

Register or Log In To remove these advertisements.