Long box stepside bed (Seattle) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Livrat · 01-07-2009, 12:48 AM

Still on a 69 3/4 ton.. not rusty!!
Does have heavy damage on drivers fender.. minor damage on passenger fender, all of the wood floor is still intact.. front panel is nice.. tailgate is toast.. all of the spare tire rack is present.. with exception of the factory lock..
$150.00 ... the only catch is you must remove. (I will help) or take the entire rolling chassis if wanted.. (cab and rear axle carrier not included)

Castiron9 · 01-07-2009, 10:41 AM

Does it come with that nice "slick" tire........LOL............

Livrat · 01-07-2009, 12:13 PM

Rene..
Yes it does!! It can come with all of the 19.5"s and a complete rolling chassis if you like... (I will even toss in a few bent fenders, core support, a step rear bumper and other various metal pieces)
As soon as I remove the built 250 6 cyl and the rust free cab I will even deliver it to your house!! (unless you need a cab too??)

I just thought I would offer it here before it all goes to the scrapper later this week ..

**CPNE** · 01-07-2009, 12:28 PM

Quote:

Originally Posted by Livrat

Rene..
Yes it does!! It can come with all of the 19.5"s and a complete rolling chassis if you like... (I will even toss in a few bent fenders, core support, a step rear bumper and other various metal pieces)
As soon as I remove the built 250 6 cyl and the rust free cab I will even deliver it to your house!! (unless you need a cab too??)

I just thought I would offer it here before it all goes to the scrapper later this week ..

You're killing me Mark, how about east coast delivery?

dave666693 · 01-07-2009, 12:48 PM

what about the "built" motor?

Livrat · 01-07-2009, 01:12 PM

Jeff. Sure I'll deliver it!! As long as you pay for: GAS.. FOOD.. and Lodging ....I could stop off in North Dakota on the way back and drag home another 34 Studebaker... hmmmmmmmmmm... ( If I can borrow my buddies 01 Diesel the fuel mileage would be over 20MPG.. if not my 68 gets 9MPG..) could get kinda of expensive and kill the deal?? LOL

Dave... At this time I plan to put the built 6 in my Honeys 72 Cheyenne shorty fleetside

wyojack · 01-09-2009, 11:52 PM

Did the bed go to the scrapper? If not do you want to sell drivers side step? Thanks Jack

Livrat · 01-10-2009, 12:33 AM

Quote:

Originally Posted by wyojack

Did the bed go to the scrapper? If not do you want to sell drivers side step? Thanks Jack

Jack... Sorry.. hauled it off this morning and did not remove the steps...

1971ChevyTruck · 01-10-2009, 01:42 AM

You don't happen to have the rear bumper brackets do you??

Livrat · 01-10-2009, 01:46 AM

Sorry no brackets, It had an ugly step bumper that was bent..

1971ChevyTruck · 01-10-2009, 01:48 AM

Ok..had to try...Thanks for the quick reply

01-07-2009, 12:48 AM	#1
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Long box stepside bed (Seattle) Still on a 69 3/4 ton.. not rusty!! Does have heavy damage on drivers fender.. minor damage on passenger fender, all of the wood floor is still intact.. front panel is nice.. tailgate is toast.. all of the spare tire rack is present.. with exception of the factory lock.. $150.00 ... the only catch is you must remove. (I will help) or take the entire rolling chassis if wanted.. (cab and rear axle carrier not included) Attached Images

01-07-2009, 10:41 AM	#2
Castiron9 72 LONGHORN OWNER Join Date: Sep 2002 Location: Seattle Wash. Posts: 963	Re: Long box stepside bed (Seattle) Does it come with that nice "slick" tire........LOL............ __________________ 72-SUPER CHEYENNE/20 LONGHORN 70-C/30 DUALLY

01-07-2009, 12:13 PM	#3
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Long box stepside bed (Seattle) Rene.. Yes it does!! It can come with all of the 19.5"s and a complete rolling chassis if you like... (I will even toss in a few bent fenders, core support, a step rear bumper and other various metal pieces) As soon as I remove the built 250 6 cyl and the rust free cab I will even deliver it to your house!! (unless you need a cab too??) I just thought I would offer it here before it all goes to the scrapper later this week ..

01-07-2009, 12:48 PM	#5
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 901	Re: Long box stepside bed (Seattle) what about the "built" motor? __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

01-07-2009, 01:12 PM	#6
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Long box stepside bed (Seattle) Jeff. Sure I'll deliver it!! As long as you pay for: GAS.. FOOD.. and Lodging ....I could stop off in North Dakota on the way back and drag home another 34 Studebaker... hmmmmmmmmmm... ( If I can borrow my buddies 01 Diesel the fuel mileage would be over 20MPG.. if not my 68 gets 9MPG..) could get kinda of expensive and kill the deal?? LOL Dave... At this time I plan to put the built 6 in my Honeys 72 Cheyenne shorty fleetside

01-09-2009, 11:52 PM	#7
wyojack Registered User Join Date: Oct 2008 Location: Riverton Wyoming Posts: 7	Re: Long box stepside bed (Seattle) Did the bed go to the scrapper? If not do you want to sell drivers side step? Thanks Jack

01-10-2009, 01:42 AM	#9
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: Long box stepside bed (Seattle) You don't happen to have the rear bumper brackets do you??

01-10-2009, 01:46 AM	#10
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Long box stepside bed (Seattle) Sorry no brackets, It had an ugly step bumper that was bent..

01-10-2009, 01:48 AM	#11
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: Long box stepside bed (Seattle) Ok..had to try...Thanks for the quick reply



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.