NC WTB 61-63 half ton chrome hubcaps - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Klas** · 11-13-2019, 10:32 AM

Chev part #3780115 nub type, 10 1/8 inside diameter.

**Ironhorse** · 11-15-2019, 05:54 PM

I have a painted one in primer if you have an interest in getting one chromed. Smaller items like hubcaps aren't near as costly to chrome as larger items like bumpers. Just have the one but I have built sets of caps one by one. Just a possibility to throw out there.

**aerotruk63** · 11-15-2019, 09:51 PM

Impressive , part number and all.
What kind of condition are you looking for?

**Klas** · 11-16-2019, 10:07 AM

Currently I have no correct hubcaps for the Apache.
Ironhorse, that's a good idea, didn't think of that. Would you send me a picture and price for what you have?
Aerotruck63, ideally I'd find 4 driver quality caps but am open to any condition of the correct caps.
Found the part number and pictures in a thread on this site.

**60-66** · 11-16-2019, 11:35 AM

I have sets of painted ones in primer that are good for chroming. The factory chrome caps a very tough to find without cracks in them. Painted ones are steel making them more durable than the brass chrome caps.

**Klas** · 11-16-2019, 01:32 PM

60-66, thanks for the reply and the information. I got my information from your thread.
Sounds like chroming the steel ones might be a easier deal to get what we want versus finding good originals.
How much for a set of four to 27370 and would you send a picture?
Thanks.

**Ironhorse** · 11-16-2019, 04:29 PM

Klas, pics of the one single 61-63 hubcap I have. Front is very straight with a few minor blems that are easy to get to for a little light metal massage. Some minor pin head sized pitting which should fill during the chrome process. No splits on the rim edge, very minor pry marks, nothing serious. $40 shipped if interested. Full sets are hard to find, member "60-66" may be able to get you fixed up with a full set.

**aerotruk63** · 11-16-2019, 10:22 PM

Like the advise above , I had painted caps chromed. The chrome shop requested I allow them to strip the paint so they know what chemicals and proccesses were used. Can't tell the difference between the brass and steel chromed versions.

**Ironhorse** · 11-17-2019, 08:52 AM

Klas, interested in the single cap I have for a re-chrome project part? Have not heard back from you and since posting have another member interested in purchase. Will hold reply to other member pertaining to availability for 24 hours, aka 7:00 AM Monday.

**Klas** · 11-17-2019, 09:18 AM

Ironhorse, sorry for the delay. Don't hold it for me. Thank you for your response.

**Ironhorse** · 11-17-2019, 09:34 AM

No problem at all and thanks for the quick reply. Hope you find the caps your looking for. Good luck to your search.

6260Art · 11-25-2019, 04:10 AM

I have a set of painted caps

**Klas** · 11-25-2019, 09:07 AM

6260Art, Thanks for the offer. I'm waiting to hear back from another forum member. If that doesn't work out, I'll get back to you. Klas

tchevs · 11-25-2019, 10:02 AM

Quote:

Originally Posted by Klas

6260Art, Thanks for the offer. I'm waiting to hear back from another forum member. If that doesn't work out, I'll get back to you. Klas

Hey Klas
With your permission, I would like to get in line for the caps that 6062art is selling. I’m looking for a clean set as well.

**Klas** · 11-25-2019, 11:17 AM

Sure. I'll let you know.

**Klas** · 11-25-2019, 11:42 AM

6260Art and Tchevs, I just finalized a deal from another member. So I'll pass 6260Art and maybe Tchevs would buy your caps.
Thanks to all on this site for your input. Klas

tchevs · 11-26-2019, 09:01 AM

Quote:

Originally Posted by 6260Art

I have a set of painted caps

Sent you a pm

63C20Rat · 12-04-2019, 09:30 PM

I am also looking for a set of 63 hub cabs
Posted via Mobile Device

**60-66** · 12-05-2019, 08:06 AM

I have these for sale , PM if interested

tchevs · 12-05-2019, 09:41 PM

Quote:

Originally Posted by 60-66

I have these for sale , PM if interested

Sent you a pm

**60-66** · 12-06-2019, 10:28 AM

Tchevs , I got it but someone else contacted me before you so I waited till they were confirmed sold , sorry. I might part with another set , let me look.

**60-66** · 12-06-2019, 04:41 PM

Heres the last set of 4 I have. Have 2 more like these for a total of six.

**cwcarpenter98** · 12-06-2019, 04:44 PM

If Tchevs passes on those, please put me in line

tchevs · 12-06-2019, 04:57 PM

I’ll take them pending on price.

**60-66** · 12-06-2019, 08:52 PM

Quote:

Originally Posted by tchevs

I’ll take them pending on price.

PM sent

11-13-2019, 10:32 AM	#1
Klas Junior Member Join Date: Dec 2018 Location: Trinity, NC Posts: 89	WTB 61-63 half ton chrome hubcaps Chev part #3780115 nub type, 10 1/8 inside diameter. Attached Images

11-15-2019, 05:54 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,286	Re: WTB 61-63 half ton chrome hubcaps I have a painted one in primer if you have an interest in getting one chromed. Smaller items like hubcaps aren't near as costly to chrome as larger items like bumpers. Just have the one but I have built sets of caps one by one. Just a possibility to throw out there. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-16-2019, 10:07 AM	#4
Klas Junior Member Join Date: Dec 2018 Location: Trinity, NC Posts: 89	Re: WTB 61-63 half ton chrome hubcaps Currently I have no correct hubcaps for the Apache. Ironhorse, that's a good idea, didn't think of that. Would you send me a picture and price for what you have? Aerotruck63, ideally I'd find 4 driver quality caps but am open to any condition of the correct caps. Found the part number and pictures in a thread on this site.

11-16-2019, 11:35 AM	#5
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: WTB 61-63 half ton chrome hubcaps I have sets of painted ones in primer that are good for chroming. The factory chrome caps a very tough to find without cracks in them. Painted ones are steel making them more durable than the brass chrome caps. __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

11-16-2019, 01:32 PM	#6
Klas Junior Member Join Date: Dec 2018 Location: Trinity, NC Posts: 89	Re: WTB 61-63 half ton chrome hubcaps 60-66, thanks for the reply and the information. I got my information from your thread. Sounds like chroming the steel ones might be a easier deal to get what we want versus finding good originals. How much for a set of four to 27370 and would you send a picture? Thanks.

11-15-2019, 09:51 PM	#3
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: WTB 61-63 half ton chrome hubcaps Impressive , part number and all. What kind of condition are you looking for? __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

11-16-2019, 04:29 PM	#7
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,286	Re: WTB 61-63 half ton chrome hubcaps Klas, pics of the one single 61-63 hubcap I have. Front is very straight with a few minor blems that are easy to get to for a little light metal massage. Some minor pin head sized pitting which should fill during the chrome process. No splits on the rim edge, very minor pry marks, nothing serious. $40 shipped if interested. Full sets are hard to find, member "60-66" may be able to get you fixed up with a full set. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-16-2019, 10:22 PM	#8
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: WTB 61-63 half ton chrome hubcaps Like the advise above , I had painted caps chromed. The chrome shop requested I allow them to strip the paint so they know what chemicals and proccesses were used. Can't tell the difference between the brass and steel chromed versions. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

11-17-2019, 08:52 AM	#9
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,286	Re: WTB 61-63 half ton chrome hubcaps Klas, interested in the single cap I have for a re-chrome project part? Have not heard back from you and since posting have another member interested in purchase. Will hold reply to other member pertaining to availability for 24 hours, aka 7:00 AM Monday. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-17-2019, 09:18 AM	#10
Klas Junior Member Join Date: Dec 2018 Location: Trinity, NC Posts: 89	Re: WTB 61-63 half ton chrome hubcaps Ironhorse, sorry for the delay. Don't hold it for me. Thank you for your response.

11-17-2019, 09:34 AM	#11
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,286	Re: WTB 61-63 half ton chrome hubcaps No problem at all and thanks for the quick reply. Hope you find the caps your looking for. Good luck to your search. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-25-2019, 04:10 AM	#12
6260Art Registered User Join Date: Feb 2019 Location: Fresno CA Posts: 28	Re: WTB 61-63 half ton chrome hubcaps I have a set of painted caps

11-25-2019, 09:07 AM	#13
Klas Junior Member Join Date: Dec 2018 Location: Trinity, NC Posts: 89	Re: WTB 61-63 half ton chrome hubcaps 6260Art, Thanks for the offer. I'm waiting to hear back from another forum member. If that doesn't work out, I'll get back to you. Klas

11-25-2019, 11:17 AM	#15
Klas Junior Member Join Date: Dec 2018 Location: Trinity, NC Posts: 89	Re: WTB 61-63 half ton chrome hubcaps Sure. I'll let you know.

11-25-2019, 11:42 AM	#16
Klas Junior Member Join Date: Dec 2018 Location: Trinity, NC Posts: 89	Re: WTB 61-63 half ton chrome hubcaps 6260Art and Tchevs, I just finalized a deal from another member. So I'll pass 6260Art and maybe Tchevs would buy your caps. Thanks to all on this site for your input. Klas



Register or Log In To remove these advertisements.

12-04-2019, 09:30 PM	#18
63C20Rat Registered User Join Date: Aug 2018 Location: TN Posts: 30	I am also looking for a set of 63 hub cabs Posted via Mobile Device

12-05-2019, 08:06 AM	#19
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: WTB 61-63 half ton chrome hubcaps I have these for sale , PM if interested __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

12-06-2019, 10:28 AM	#21
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: WTB 61-63 half ton chrome hubcaps Tchevs , I got it but someone else contacted me before you so I waited till they were confirmed sold , sorry. I might part with another set , let me look. __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

12-06-2019, 04:41 PM	#22
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: WTB 61-63 half ton chrome hubcaps Heres the last set of 4 I have. Have 2 more like these for a total of six. __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

12-06-2019, 04:44 PM	#23
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,483	Re: WTB 61-63 half ton chrome hubcaps If Tchevs passes on those, please put me in line __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

12-06-2019, 04:57 PM	#24
tchevs Registered User Join Date: Feb 2017 Location: Castroville California Posts: 506	Re: WTB 61-63 half ton chrome hubcaps I’ll take them pending on price.

Register or Log In To remove these advertisements.