|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
02-03-2018, 10:33 PM
|
#1 |
|
Registered User
Join Date: May 2016
Location: Fort Mohave, AZ
Posts: 368
|
Horizontal window seals
I'm installing my door glass and have a set of LMC horizontal window seals. Both the rubber and felt seals appear too long. Do these need to be trimmed? If so with what?
Does anyone sell these seals that fit better then the LMC junk?
__________________
1970 GMC 2500 700R Trans, RideTech 4 link rear suspension, air bagged on all four corners, factory upper/lower A-Arms, 2 inch drop spindles. 350 SBC 300hp Weiand Supercharger FiTech 30004 EFI |
|
|
|
02-03-2018, 11:26 PM
|
#2 |
|
Senior Member
 
Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 6,357
|
Re: Horizontal window seals
Yes they need trimmed. I used tin snips.
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear |
|
|
|
|
02-03-2018, 11:40 PM
|
#3 | |
|
The Older Generation
  
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,641
|
Re: Horizontal window seals
Quote:
I trim mine with tin snips too. These are the best window felts/sweeps I have found. Made in the USA by Clark Industries, Pearcy, AR and go by the "Repops" brand. https://www.classicindustries.com/product/cr1103.html https://www.classicindustries.com/product/cr1073.html The only difference in the two sets is one is stainless and one is chrome plated stainless... There may be other vendors on here that sell the same brand (I hope they post up if they do) but I think the manufacturer is pretty selective who they let distribute the product. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
|
02-03-2018, 11:53 PM
|
#4 |
|
Registered User
Join Date: Nov 2012
Location: Freeland, Michigan
Posts: 1,385
|
Re: Horizontal window seals
I'm having the same issue.... going to ask a dumb question...I'm assuming the rubber seal goes on out side and fuzzy goes on inside??
Thanks eric |
|
|
|
|
02-04-2018, 12:24 AM
|
#5 | |
|
Registered User
Join Date: May 2016
Location: Fort Mohave, AZ
Posts: 368
|
Re: Horizontal window seals
Quote:
__________________
1970 GMC 2500 700R Trans, RideTech 4 link rear suspension, air bagged on all four corners, factory upper/lower A-Arms, 2 inch drop spindles. 350 SBC 300hp Weiand Supercharger FiTech 30004 EFI |
|
|
|
|
|
02-04-2018, 01:36 PM
|
#6 |
|
Registered User
Join Date: Mar 2015
Location: Bigfork, MT
Posts: 466
|
Re: Horizontal window seals
What LockDoc said about Repops, just put them on yesterday. I bought them from Early Classic Enterprises (earlyclassic.com), great company to deal with.
|
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
