TX WTB/ WTT SBC internal balance auto flywheel 168 tooth, rocker arms, push rods and hea - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WIDESIDE72** · 02-02-2013, 12:57 AM

I am trying to get a 71 350 going and need an internal balance auto flywheel 168 tooth, a set of 16 rocker arms/nuts/ balls and 16 push rods. This is a lo po/ low buck deal for my nephew so used is OK. I figured someone has probably upgraded and has some of this stuff lying around. He's a good kid, going to college to be a coach like his dad (my BIL), making good grades and works part time too. He wants to buy my 79 Malibu, but I have to get it going first and he is helping with labor, but doesn't have a lot of money to spend. I have helped him with all the used parts I have.

I have a used scat cast 383 stroker crank needs polishing or possibly turned .010/.010, a scat external balance sfi approved flywheel and sfi external balanced balancer for trade.

Also, anything I have for sale on the forum is available for trade as well.
Posted via Mobile Device
Posted via Mobile Device

**WIDESIDE72** · 02-02-2013, 12:58 AM

I almost forgot, a set of head bolts for same engine as well.
Posted via Mobile Device

**WIDESIDE72** · 02-02-2013, 01:38 AM

Could a moderator change this to "WTB/ WTT SBC internal balance auto flywheel 168 tooth, rocker arms, push rods and head bolts

**70STOVEBOLT** · 02-02-2013, 02:35 PM

I think I might have what you are looking for. I will check later today and get back to you.

**WIDESIDE72** · 02-02-2013, 04:00 PM

Quote:

Originally Posted by 70STOVEBOLT

I think I might have what you are looking for. I will check later today and get back to you.

Thanks!
Posted via Mobile Device

Marcello D'Ottavio · 02-02-2013, 02:50 PM

Hi, how much you asking for the scat external balance sfi approved flywheel and sfi external balanced balancer?.

**WIDESIDE72** · 02-02-2013, 03:59 PM

Quote:

Originally Posted by Marcello D'Ottavio

Hi, how much you asking for the scat external balance sfi approved flywheel and sfi external balanced balancer?.

http://67-72chevytrucks.com/vboard/s...d.php?t=564096
Posted via Mobile Device

**WIDESIDE72** · 02-07-2013, 03:48 AM

ttt

**70STOVEBOLT** · 02-07-2013, 10:32 AM

Sorry, I have not made it over to my storage building yet. I will go after work tonight if I get a chance.

**70STOVEBOLT** · 02-08-2013, 02:15 PM

I checked my stash and all I have left are rocker arms w/hardware. If I run across the other parts I will let you know.

**WIDESIDE72** · 02-08-2013, 09:26 PM

Quote:

Originally Posted by 70STOVEBOLT

I checked my stash and all I have left are rocker arms w/hardware. If I run across the other parts I will let you know.

I found some headbolts but I forgot to count them, but let me know if you come across any as well as pushrods.
Posted via Mobile Device

**70STOVEBOLT** · 02-11-2013, 10:40 AM

Quote:

Originally Posted by WIDESIDE72

I found some headbolts but I forgot to count them, but let me know if you come across any as well as pushrods.
Posted via Mobile Device

Will do.

**WIDESIDE72** · 02-11-2013, 11:18 PM

Quote:

Originally Posted by 70STOVEBOLT

I checked my stash and all I have left are rocker arms w/hardware. If I run across the other parts I will let you know.

Do you have all 16 rocker arms balls and nuts? If so how much shipped to Leander Tx 78741?
Posted via Mobile Device

**Hart_Rod** · 02-08-2013, 03:05 PM

This probably won't help, but I have this:

http://pensacola.craigslist.org/pts/3570554884.html

**WIDESIDE72** · 02-08-2013, 09:27 PM

Quote:

Originally Posted by Hart_Rod

This probably won't help, but I have this:

http://pensacola.craigslist.org/pts/3570554884.html

So... That's an ad for a th350... Did I miss something? I don't need a transmission...
Posted via Mobile Device

**70STOVEBOLT** · 02-12-2013, 09:17 AM

Yes, I have all of them. They are stock so probably 1.5:1 ratio. $26.00 shipped.

Thanks,
Mark

**WIDESIDE72** · 02-12-2013, 02:54 PM

Quote:

Originally Posted by 70STOVEBOLT

Yes, I have all of them. They are stock so probably 1.5:1 ratio. $26.00 shipped.

Thanks,
Mark

I just remembered I had an old tbi 305 pull out I need to check for compatie rocker arms... Can I let you know something thurs eve?
Posted via Mobile Device

**70STOVEBOLT** · 02-12-2013, 03:08 PM

No hurry, let me know whenever. According to my parts books, the rocker arms on a 305 from 1976-88 will be the same as the 350 from 1969-87. For 305 engines 1989-95 they are the same as the 350 from 1988-95. The ones I have came from a 1974 350 engine.

Thanks,
Mark

**WIDESIDE72** · 02-14-2013, 11:02 PM

Quote:

Originally Posted by 70STOVEBOLT

No hurry, let me know whenever. According to my parts books, the rocker arms on a 305 from 1976-88 will be the same as the 350 from 1969-87. For 305 engines 1989-95 they are the same as the 350 from 1988-95. The ones I have came from a 1974 350 engine.

Thanks,
Mark

I figured out the same thing, that the ones from the TBI are different. Figures. PM me oyur payment info.

**70STOVEBOLT** · 02-15-2013, 09:11 AM

Quote:

Originally Posted by WIDESIDE72

I figured out the same thing, that the ones from the TBI are different. Figures. PM me oyur payment info.

2 PMs sent. Possible trade?

MoreLoveThanMoney · 02-14-2013, 11:24 PM

I have a set of heads that are complete. If you need the arms and such I could send them to you.

**WIDESIDE72** · 02-16-2013, 03:20 AM

A neighbor aware of our plight found and donated a set of used rocker arms! Sorry if I had anyone go to too much trouble.
Posted via Mobile Device

**70STOVEBOLT** · 02-16-2013, 11:46 AM

No problem.

02-02-2013, 12:57 AM	#1
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	WTB/ WTT SBC internal balance auto flywheel 168 tooth, rocker arms, push rods and hea I am trying to get a 71 350 going and need an internal balance auto flywheel 168 tooth, a set of 16 rocker arms/nuts/ balls and 16 push rods. This is a lo po/ low buck deal for my nephew so used is OK. I figured someone has probably upgraded and has some of this stuff lying around. He's a good kid, going to college to be a coach like his dad (my BIL), making good grades and works part time too. He wants to buy my 79 Malibu, but I have to get it going first and he is helping with labor, but doesn't have a lot of money to spend. I have helped him with all the used parts I have. I have a used scat cast 383 stroker crank needs polishing or possibly turned .010/.010, a scat external balance sfi approved flywheel and sfi external balanced balancer for trade. Also, anything I have for sale on the forum is available for trade as well. Posted via Mobile Device Posted via Mobile Device Last edited by WIDESIDE72; 02-02-2013 at 04:08 PM.

02-02-2013, 12:58 AM	#2
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Wtb/ wtf SBC internal balance auto flywheel 168 tooth, rocker arms and push rods I almost forgot, a set of head bolts for same engine as well. Posted via Mobile Device

02-02-2013, 01:38 AM	#3
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Wtb/ wtf SBC internal balance auto flywheel 168 tooth, rocker arms and push rods Could a moderator change this to "WTB/ WTT SBC internal balance auto flywheel 168 tooth, rocker arms, push rods and head bolts

02-02-2013, 02:35 PM	#4
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,283	Re: Wtb/ wtf SBC internal balance auto flywheel 168 tooth, rocker arms and push rods I think I might have what you are looking for. I will check later today and get back to you. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

02-02-2013, 02:50 PM	#6
Marcello D'Ottavio Registered User Join Date: Jul 2012 Location: Winnipeg, Manitoba, Canada Posts: 18	Re: Wtb/ wtf SBC internal balance auto flywheel 168 tooth, rocker arms and push rods Hi, how much you asking for the scat external balance sfi approved flywheel and sfi external balanced balancer?.

02-07-2013, 03:48 AM	#8
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: WTB/ WTT SBC internal balance auto flywheel 168 tooth, rocker arms, push rods and ttt

02-07-2013, 10:32 AM	#9
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,283	Re: WTB/ WTT SBC internal balance auto flywheel 168 tooth, rocker arms, push rods and Sorry, I have not made it over to my storage building yet. I will go after work tonight if I get a chance. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

02-08-2013, 02:15 PM	#10
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,283	Re: WTB/ WTT SBC internal balance auto flywheel 168 tooth, rocker arms, push rods and I checked my stash and all I have left are rocker arms w/hardware. If I run across the other parts I will let you know. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

02-08-2013, 03:05 PM	#14
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,846	Re: WTB/ WTT SBC internal balance auto flywheel 168 tooth, rocker arms, push rods and This probably won't help, but I have this: http://pensacola.craigslist.org/pts/3570554884.html __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

02-12-2013, 09:17 AM	#16
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,283	Re: WTB/ WTT SBC internal balance auto flywheel 168 tooth, rocker arms, push rods and Yes, I have all of them. They are stock so probably 1.5:1 ratio. $26.00 shipped. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

02-12-2013, 03:08 PM	#18
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,283	Re: WTB/ WTT SBC internal balance auto flywheel 168 tooth, rocker arms, push rods and No hurry, let me know whenever. According to my parts books, the rocker arms on a 305 from 1976-88 will be the same as the 350 from 1969-87. For 305 engines 1989-95 they are the same as the 350 from 1988-95. The ones I have came from a 1974 350 engine. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

02-14-2013, 11:24 PM	#21
MoreLoveThanMoney Registered User Join Date: Nov 2010 Location: Oklahoma City, Ok Posts: 438	Re: WTB/ WTT SBC internal balance auto flywheel 168 tooth, rocker arms, push rods and I have a set of heads that are complete. If you need the arms and such I could send them to you.

02-16-2013, 03:20 AM	#22
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: WTB/ WTT SBC internal balance auto flywheel 168 tooth, rocker arms, push rods and A neighbor aware of our plight found and donated a set of used rocker arms! Sorry if I had anyone go to too much trouble. Posted via Mobile Device

02-16-2013, 11:46 AM	#23
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,283	Re: WTB/ WTT SBC internal balance auto flywheel 168 tooth, rocker arms, push rods and No problem. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.