What did you get done? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

matt67350 · 07-10-2005, 11:35 PM

Well its that time. Lets hear what you got done.
I myself, spent the morning and afternoon tamming the wild weeds of North Texas. The Barn was hopping. Had a new board member up from Houston,
(plugger7) find a great deal on a swb frame. This guy was relentless, and when the dust setteled, he had a swb frame on his trailor headed for some fun sandblasting and painting. Tx Firefighter came to get a steal on some 6-lug slots. With his safty instruction and expert tool handling the slots were no match and found themselves loaded in the back of his truck.
It's always great to see baord members and share parts and stories.
Thanks, Plugger7 (AKA Glenn )and TxFirefighter (AKA Kevin).

tomatocity · 07-11-2005, 12:35 AM

Good board gathering!

Saturday Chickenwing and I went Junk Yarding and I got a Coca Cola for $1. Four yards and zero stuff for me. I did have a great time with Chickenwing. We ate hamburgers and fries at Jaspers in Rocklin and guacamole and chips at his home. I will return for a 1 1/4" sway bar and alternator bracket next Saturday.

Sunday went to Stockton to a swap meet car show at the Fairgrounds. Drank Starbucks and chatted with friend Al while we drove there. Met friend Jeff as he was trying to sell his 52 Chevy 5-window. Found two fans, one flywheel cover, two cleaning brushes, and found a pair of Tahoe leather seats with 3-point harness for $50 and bought them for $40.

Sunday evening recieved a call from person I previously contacted that was selling a rolling 67 C10 frame (no steering column), bed, tailgate, cab (cab corner metal included), front clip, and a good power steering box. Priced right and I bought it without seeing it. Some parts will be for sale. Some days the tail does not wag you.

Now my 70 will turn into a 67 and it will not make Hot August Nights this year.

Next week: Junk Yarding and 67 recovery on Saturday and car show and swap meet on Sunday.

1STtimePRo'71 · 07-11-2005, 12:49 AM

Put the old 71 into storage for the summer to start the teardown. Then I had to do a brake job an the ricer. Hey gotta keep the old lady safe. Next week.......????

chickenwing · 07-11-2005, 12:53 AM

Sat. went recreational junk-yarding with Tomatocity, aka Tim. Had a great time. I'm a little farther along with my truck than Tim so it was great to be with someone that still has lots of enthusiasm. Yards were pretty barren. Still found a few things. Scored what I hope is a factory tool bag for my jack handle and lug wrench. Also picked up a hood latch so I can do Putters in cab hood release mod.

Sun. Pretty much kicked it.. Enlarged a bolt hole in my neighbors 12si alt. He runs early Broncos, still a nice guy though. He invited me over for beer and bar-b-q and who was I to say no?! Came home and watched movies with the girls and later had to go outside and let a sniffer know I was watching him while he was talking to my oldest.

fastwillie 696969 · 07-11-2005, 12:59 AM

i yelled at some toothless girl at pep boys when i came out of the store she want leaning against my truck bed talking to some dude in beat up 240 z
i got 2003 ford ranger thin sheetmetal for a box so i ask her to remove her ass off my truck she started to talk and i notice her lips were flapping due to no teeth just all gum action she look just like the cartoon charcter lil abby (hillbilly) i couldnt understand a word she said it was coming out like don vito from viva la bam
whaaa da ah tyhisur truck
i just laugh got in my truck and laugh as i drove off

Bill72BB · 07-11-2005, 01:44 AM

Got out the Cal Custom and Polished the wheels on BB on Saturday .

camaro__thunder · 07-11-2005, 04:05 AM

The guy by the frame is my friend Cody I gave him your contact info! Well this weekend I clearanced a bunch of my cab floor, rear of cab and the bed supports so my driveshaft will clear, installed my fuel cell, holley blue, filter and regulator. I should be hooking up my Nitrogen this week finally getting away from the Manual fill on the bags.

I'll try and put some pics up later today.

tomatocity · 07-11-2005, 06:14 PM

Quote:

Originally Posted by 70blowngmc

i yelled at some toothless girl at pep boys when i came out of the store she want leaning against my truck bed talking to some dude in beat up 240 z
i got 2003 ford ranger thin sheetmetal for a box so i ask her to remove her ass off my truck she started to talk and i notice her lips were flapping due to no teeth just all gum action she look just like the cartoon charcter lil abby (hillbilly) i couldnt understand a word she said it was coming out like don vito from viva la bam
whaaa da ah tyhisur truck
i just laugh got in my truck and laugh as i drove off

Hey put the Stockton Car Show and Swap Meet on your calendar for next year. I have been there twice in teh last five years and the swap meet was excellent as was the smaller car show.

**Palf70Step** · 07-11-2005, 05:34 AM

Rearranged the shop to squeeze in as much as I could for Dennis, then moved it back around so I can start working on things again. Gotta love the Gulf coast.

GMC AMI · 07-11-2005, 06:01 AM

I made 300 super nice green Hay bales, hay season all by myself with no helpers this year. Yesterday I installed the 350 I rebuilt in my newly painted bright red 72 Chevy 4x4. Soon to be fired up and hood reinstalled.

panhandler62 · 07-11-2005, 07:33 AM

I spent most of the day watching movies with my girlfriend and her daughter. I did get my passenger side rocker put back together...

Ordered carpet Friday night....

Rokcrln · 07-11-2005, 08:07 AM

Well started off Saturday walking down to Putah creek cafe for steak and eggs then home in order to rotate and clean the rims and tires on my FGs mini cooper S. Then went to a friends to recover some of my old Bronco parts (hood, PB, steering wheel, pedals and dash in order to get my Bronco buggy up an drolling so I can un-burry my 71 chevy and get her finished up. Sunday went to the movie's while the bug guy was bombinghte house and shop for 8-leggers. Now it is 5:00an Monday morning and time to head off to work.
To all have a great week.

Kevin
Winters

fastwillie 696969 · 07-11-2005, 05:36 PM

Quote:

Originally Posted by Rokcrln

Well started off Saturday walking down to Putah creek cafe for steak and eggs then home in order to rotate and clean the rims and tires on my FGs mini cooper S. Then went to a friends to recover some of my old Bronco parts (hood, PB, steering wheel, pedals and dash in order to get my Bronco buggy up an drolling so I can un-burry my 71 chevy and get her finished up. Sunday went to the movie's while the bug guy was bombinghte house and shop for 8-leggers. Now it is 5:00an Monday morning and time to head off to work.
To all have a great week.

Kevin
Winters

u from napa area ?

shifty · 07-11-2005, 09:32 AM

Finished getting the new headers and intake on the truck. Had to grind the intake a lot and ballpeen the headers. Real pain in the ass. Ran out of manifold clamps, had to improvise. Finally got everything bolted up, throttle linkage didn't fit right. Fired her up anyway. Man, talk about loud. Sounded like I had a half dozen Harleys in my garage! Not sure if I've got any leakage or not, but it seemed to run pretty well. Just need a solution for my throttle linkage problems.

No pics right now, camera was at work, forgot to bring it home.

Putter · 07-11-2005, 10:15 AM

Shaved a few unused holes in the firewall of the '67 cab that is headed for my '69 stepper, while they are easy to get to. Removed the non-A/C dash. Trimmed & test fitted the A/C dash that I bought a while back from Fade. Removed all the old seam-sealer.

Then the rain showed up (thanks to Hurricane Dennis), so I packed it up and went inside.

rambler · 07-11-2005, 10:28 AM

fianlly got the radiator, trans cooler, and HEI in my Deer Killer... (72 Chevy), and pulled the battery out of my car.. and of course,, she wouldn't start! no fire, so of course I did something when I switched to HEI.. only productiivty was I baled hay this weekend,, but with the lack of rain,, I got 1/4 the ususal yield..

67ChevyRedneck · 07-11-2005, 10:33 AM

Got my new stepside LED's from Frank's PICKMUP. Truck is at a family members home 3 hours away, so hopefully will get to try them out soon!!!

oj70chevy · 07-11-2005, 11:13 AM

Well, this weekend I set up a new 15 foot swimming pool to keep the kids out of my gauge and my

. I also spent more for the sand and wood to levele it off then the pool was worth

. At least ill have more of my time to spend on the truck

68gmcdually · 07-11-2005, 02:28 PM

I worked on some lighting issues and worked out a few more bugs on Friday night. Worked all day Saturday and spent all day Sunday with my wife.

70c10 · 07-11-2005, 11:07 AM

Got the 71' out of the garage (finally done) and drove it about 25 miles. Suprised the hell out of me when I nailed the gas from a dead stop and got sideways for about 50 feet. Now I need a buyer!

mocwon · 07-11-2005, 05:19 PM

Started stripping and priming the facia boards on the house. This kind'a work sucks in 100 degree heat. No wait, it suck no matter what the temperature. Looks like it'll be many evenings of the same thing for a while until done.... then I get to paint it the final color.

Sweet72 · 07-11-2005, 09:32 PM

File fit piston rings for the 383, what a tedious process to get them exactly right. Deburred pistons and washed them. Installed petcock water jacket block drains. The little details take the most time.

flatblackclassic · 07-11-2005, 09:45 PM

I completed about 80% Of the wiring under the hood, got the plugs, wires, cap, and rotor installed, as well as turning it over for the first time since i dropped the 350 in a few months ago. Tomorrow I'll put some gas in the tank and she should fire up for me.

70 shorty · 07-11-2005, 10:00 PM

Helped out on a front axle u joint replacement on a Jeep GC. Loved the fact that the valve cover on the 70 I finally got to stop leaking. Drove the truck to the cruise night (parked as far away as possible). Oh, I did put the speakers in new boxes for a little better sound ( as good as blown speakers can give)

laid67c10 · 07-11-2005, 10:07 PM

pulled the 350 motor and 350 tranny thats the donor for my 67 and pulled the i-6 and 3 speed out of the 67 also finally got enough buddy's and my dad over at my shop to help get the cab off it's been unbolted for a few weeks now but not easy to lift with only 3 of us...

07-10-2005, 11:35 PM	#1
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	What did you get done? Well its that time. Lets hear what you got done. I myself, spent the morning and afternoon tamming the wild weeds of North Texas. The Barn was hopping. Had a new board member up from Houston, (plugger7) find a great deal on a swb frame. This guy was relentless, and when the dust setteled, he had a swb frame on his trailor headed for some fun sandblasting and painting. Tx Firefighter came to get a steal on some 6-lug slots. With his safty instruction and expert tool handling the slots were no match and found themselves loaded in the back of his truck. It's always great to see baord members and share parts and stories. Thanks, Plugger7 (AKA Glenn )and TxFirefighter (AKA Kevin). __________________ 69 swb stepside, rebuild and upgrade in progress Last edited by matt67350; 01-24-2009 at 09:24 PM.

07-11-2005, 12:35 AM	#2
tomatocity Registered User Join Date: Jun 2005 Location: Sacramento CA Posts: 1,255	Good board gathering! Saturday Chickenwing and I went Junk Yarding and I got a Coca Cola for $1. Four yards and zero stuff for me. I did have a great time with Chickenwing. We ate hamburgers and fries at Jaspers in Rocklin and guacamole and chips at his home. I will return for a 1 1/4" sway bar and alternator bracket next Saturday. Sunday went to Stockton to a swap meet car show at the Fairgrounds. Drank Starbucks and chatted with friend Al while we drove there. Met friend Jeff as he was trying to sell his 52 Chevy 5-window. Found two fans, one flywheel cover, two cleaning brushes, and found a pair of Tahoe leather seats with 3-point harness for $50 and bought them for $40. Sunday evening recieved a call from person I previously contacted that was selling a rolling 67 C10 frame (no steering column), bed, tailgate, cab (cab corner metal included), front clip, and a good power steering box. Priced right and I bought it without seeing it. Some parts will be for sale. Some days the tail does not wag you. Now my 70 will turn into a 67 and it will not make Hot August Nights this year. Next week: Junk Yarding and 67 recovery on Saturday and car show and swap meet on Sunday. Attached Images __________________ Got bored, sold everthing. Got bored, looking for a 1960-66 C-10. Want to build my last truck. Last edited by tomatocity; 07-11-2005 at 12:36 AM. Reason: picture

07-11-2005, 12:49 AM	#3
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	Put the old 71 into storage for the summer to start the teardown. Then I had to do a brake job an the ricer. Hey gotta keep the old lady safe. Next week.......???? __________________ -Cory 1967 2 Wheel Chevy

07-11-2005, 12:53 AM	#4
chickenwing Lovin' Life in Miss.! Join Date: Mar 2004 Location: Puckett, Mississippi Posts: 1,937	Sat. went recreational junk-yarding with Tomatocity, aka Tim. Had a great time. I'm a little farther along with my truck than Tim so it was great to be with someone that still has lots of enthusiasm. Yards were pretty barren. Still found a few things. Scored what I hope is a factory tool bag for my jack handle and lug wrench. Also picked up a hood latch so I can do Putters in cab hood release mod. Sun. Pretty much kicked it.. Enlarged a bolt hole in my neighbors 12si alt. He runs early Broncos, still a nice guy though. He invited me over for beer and bar-b-q and who was I to say no?! Came home and watched movies with the girls and later had to go outside and let a sniffer know I was watching him while he was talking to my oldest. __________________ The truck... you hear that? No really, you did hear that?!!!

07-11-2005, 12:59 AM	#5
fastwillie 696969 ~Rest In Peace~ Join Date: May 2005 Location: CALIFORNIA NOR CAL Posts: 9,707	i yelled at some toothless girl at pep boys when i came out of the store she want leaning against my truck bed talking to some dude in beat up 240 z i got 2003 ford ranger thin sheetmetal for a box so i ask her to remove her ass off my truck she started to talk and i notice her lips were flapping due to no teeth just all gum action she look just like the cartoon charcter lil abby (hillbilly) i couldnt understand a word she said it was coming out like don vito from viva la bam whaaa da ah tyhisur truck i just laugh got in my truck and laugh as i drove off __________________ is it fast ? it has a lighting bolt donut? B___H please, I can remove 90% of your so called "beauty" with a kleenex

07-11-2005, 01:44 AM	#6
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,980	Got out the Cal Custom and Polished the wheels on BB on Saturday . __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

07-11-2005, 04:05 AM	#7
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	The guy by the frame is my friend Cody I gave him your contact info! Well this weekend I clearanced a bunch of my cab floor, rear of cab and the bed supports so my driveshaft will clear, installed my fuel cell, holley blue, filter and regulator. I should be hooking up my Nitrogen this week finally getting away from the Manual fill on the bags. I'll try and put some pics up later today. __________________ My Project 69 SWB SHAVED BAGGED DOORED Last edited by camaro__thunder; 07-11-2005 at 04:06 AM.

07-11-2005, 05:34 AM	#9
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,923	Rearranged the shop to squeeze in as much as I could for Dennis, then moved it back around so I can start working on things again. Gotta love the Gulf coast. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

07-11-2005, 06:01 AM	#10
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	I made 300 super nice green Hay bales, hay season all by myself with no helpers this year. Yesterday I installed the 350 I rebuilt in my newly painted bright red 72 Chevy 4x4. Soon to be fired up and hood reinstalled. __________________ 1968 Chevy 4x4 307 4 speed

07-11-2005, 07:33 AM	#11
panhandler62 Java Mechanic Join Date: Jun 2005 Location: Martinsburg, WV Posts: 6,764	I spent most of the day watching movies with my girlfriend and her daughter. I did get my passenger side rocker put back together... Ordered carpet Friday night....

07-11-2005, 08:07 AM	#12
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Well started off Saturday walking down to Putah creek cafe for steak and eggs then home in order to rotate and clean the rims and tires on my FGs mini cooper S. Then went to a friends to recover some of my old Bronco parts (hood, PB, steering wheel, pedals and dash in order to get my Bronco buggy up an drolling so I can un-burry my 71 chevy and get her finished up. Sunday went to the movie's while the bug guy was bombinghte house and shop for 8-leggers. Now it is 5:00an Monday morning and time to head off to work. To all have a great week. Kevin Winters

07-11-2005, 09:32 AM	#14
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Finished getting the new headers and intake on the truck. Had to grind the intake a lot and ballpeen the headers. Real pain in the ass. Ran out of manifold clamps, had to improvise. Finally got everything bolted up, throttle linkage didn't fit right. Fired her up anyway. Man, talk about loud. Sounded like I had a half dozen Harleys in my garage! Not sure if I've got any leakage or not, but it seemed to run pretty well. Just need a solution for my throttle linkage problems. No pics right now, camera was at work, forgot to bring it home. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

07-11-2005, 10:15 AM	#15
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Shaved a few unused holes in the firewall of the '67 cab that is headed for my '69 stepper, while they are easy to get to. Removed the non-A/C dash. Trimmed & test fitted the A/C dash that I bought a while back from Fade. Removed all the old seam-sealer. Then the rain showed up (thanks to Hurricane Dennis), so I packed it up and went inside. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

07-11-2005, 10:28 AM	#16
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	fianlly got the radiator, trans cooler, and HEI in my Deer Killer... (72 Chevy), and pulled the battery out of my car.. and of course,, she wouldn't start! no fire, so of course I did something when I switched to HEI.. only productiivty was I baled hay this weekend,, but with the lack of rain,, I got 1/4 the ususal yield.. __________________ No matter where you are..... There you are... Buckaroo Banzi

07-11-2005, 10:33 AM	#17
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Got my new stepside LED's from Frank's PICKMUP. Truck is at a family members home 3 hours away, so hopefully will get to try them out soon!!! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!



Register or Log In To remove these advertisements.

07-11-2005, 11:13 AM	#18
oj70chevy 250 V-6 Club Join Date: Feb 2005 Location: San antonio, TX. Posts: 898	Well, this weekend I set up a new 15 foot swimming pool to keep the kids out of my gauge and my . I also spent more for the sand and wood to levele it off then the pool was worth . At least ill have more of my time to spend on the truck __________________ 1970 Chevy C/10 6 Cyl. 43k original miles all factory .http://67-72chevytrucks.com/vboard/s...d.php?t=197523 Never ask a stupid question unless you want a stupid answer .

07-11-2005, 02:28 PM	#19
68gmcdually Registered User Join Date: Feb 2004 Location: Fenelon Falls, ON Canada Posts: 1,455	I worked on some lighting issues and worked out a few more bugs on Friday night. Worked all day Saturday and spent all day Sunday with my wife. __________________ James Bellwood 1968 930 Extend-A-Cab Dually 5.7l, 5 speed,

07-11-2005, 11:07 AM	#20
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Got the 71' out of the garage (finally done) and drove it about 25 miles. Suprised the hell out of me when I nailed the gas from a dead stop and got sideways for about 50 feet. Now I need a buyer! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

07-11-2005, 05:19 PM	#21
mocwon Keep On Truckin' Join Date: Mar 2003 Location: Buda, Texas Posts: 1,354	Started stripping and priming the facia boards on the house. This kind'a work sucks in 100 degree heat. No wait, it suck no matter what the temperature. Looks like it'll be many evenings of the same thing for a while until done.... then I get to paint it the final color. __________________ Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire.....

07-11-2005, 09:32 PM	#22
Sweet72 Registered User Join Date: Nov 2003 Location: Alexandria, VA Posts: 1,534	File fit piston rings for the 383, what a tedious process to get them exactly right. Deburred pistons and washed them. Installed petcock water jacket block drains. The little details take the most time. __________________ '72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction. Last edited by Sweet72; 07-11-2005 at 09:32 PM.

07-11-2005, 09:45 PM	#23
flatblackclassic Registered User Join Date: Mar 2004 Posts: 210	I completed about 80% Of the wiring under the hood, got the plugs, wires, cap, and rotor installed, as well as turning it over for the first time since i dropped the 350 in a few months ago. Tomorrow I'll put some gas in the tank and she should fire up for me.

07-11-2005, 10:00 PM	#24
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,772	Helped out on a front axle u joint replacement on a Jeep GC. Loved the fact that the valve cover on the 70 I finally got to stop leaking. Drove the truck to the cruise night (parked as far away as possible). Oh, I did put the speakers in new boxes for a little better sound ( as good as blown speakers can give) __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

07-11-2005, 10:07 PM	#25
laid67c10 Registered User Join Date: Apr 2005 Location: longview, TX Posts: 280	pulled the 350 motor and 350 tranny thats the donor for my 67 and pulled the i-6 and 3 speed out of the 67 also finally got enough buddy's and my dad over at my shop to help get the cab off it's been unbolted for a few weeks now but not easy to lift with only 3 of us... __________________ 49 Chevy - currently under construction being bagged and hunting for a LS drivetrain!!! 09 - Harley nighttrain on air ride!

Register or Log In To remove these advertisements.