'64 C10 partial resto write-up - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TwoFiftyShifter · 01-03-2009, 01:36 AM

I found this on google, not sure if you've seen it before, but he takes a 64 Chevy and does a lot of work to it, cosmetic and rust repair and whatnot. A real budget build, or, should I dare say it, you could almost call it a RAT ROD.

http://www.chevyasylum.com/64c10/Welcome.html

MXmaniac · 01-03-2009, 02:19 AM

Yeah I've read through that whole build. It's pretty cool. I'd call it a budget build, its definitely too well built to be considered a rat, in my opinion.

joe231 · 01-03-2009, 03:08 AM

yeah that has been around for some time, very good read!
rat rod

Rogue · 01-03-2009, 02:54 PM

Flat black, Red wheels, Sculls, fruit jar, and torched springs.

66truckin · 01-03-2009, 03:28 PM

yikes, pop rivets, fiberglass and bondo patches, spring clamps, crooked cherry bombs, rattle can paint job. definitely low budget

kizer · 01-03-2009, 04:08 PM

I applaud the guy for going for it and at the same time laugh because he put in a lot of effort and could of gone just a little farther for a better outcome.

However I'd high five him for all the work because hes way farther ahead than I am and did it his way.

66truckin · 01-03-2009, 04:38 PM

yes I commend him for trying but if he ever sells it the next guy is going to be in for some surprises.

MXmaniac · 01-03-2009, 07:49 PM

haha I guess I didn't remember it very well. I read it all a few years ago and didn't remember it being that rough!

joe231 · 01-03-2009, 09:39 PM

Quote:

Originally Posted by MXmaniac

haha I guess I didn't remember it very well. I read it all a few years ago and didn't remember it being that rough!

same here....guess i need to re-read it

01-03-2009, 01:36 AM	#1
TwoFiftyShifter Registered User Join Date: Nov 2008 Location: Gwinnett GA Posts: 1,803	'64 C10 partial resto write-up I found this on google, not sure if you've seen it before, but he takes a 64 Chevy and does a lot of work to it, cosmetic and rust repair and whatnot. A real budget build, or, should I dare say it, you could almost call it a RAT ROD. http://www.chevyasylum.com/64c10/Welcome.html __________________ 1982 K10 SWB 1987 V20 - Sold - Doh!

01-03-2009, 02:19 AM	#2
MXmaniac Registered User Join Date: Jan 2007 Location: Denton, Texas Posts: 356	Re: '64 C10 partial resto write-up Yeah I've read through that whole build. It's pretty cool. I'd call it a budget build, its definitely too well built to be considered a rat, in my opinion. __________________ Andrew '69 C-20(292, 4-speed) Retired Daily Driver '64 C-10(250, 3-speed) Fixerupper '97 F*rd Mustang GT(4.6L, 5-speed) Daily Driver If I only wanted two pedals I'd have bought a bicycle.

01-03-2009, 03:08 AM	#3
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: '64 C10 partial resto write-up yeah that has been around for some time, very good read! rat rod __________________ *CHEVY ONLY*

01-03-2009, 02:54 PM	#4
Rogue Airport Bum Join Date: Jan 2005 Location: Propwash (16Xray) D/FW, Texas Posts: 320	Re: '64 C10 partial resto write-up Flat black, Red wheels, Sculls, fruit jar, and torched springs. __________________ 1964 Chevrolet C-10 1941 Chevrolet coupe 1962 Thunderbird 1959 Edsel Villager 1963 Skylark

01-03-2009, 03:28 PM	#5
66truckin Registered User Join Date: Jan 2009 Location: Springfield, IL Posts: 185	Re: '64 C10 partial resto write-up yikes, pop rivets, fiberglass and bondo patches, spring clamps, crooked cherry bombs, rattle can paint job. definitely low budget

01-03-2009, 04:08 PM	#6
kizer Its Deja Vu time again Join Date: Aug 2008 Location: Marysville, North of Seattle WA Posts: 815	Re: '64 C10 partial resto write-up I applaud the guy for going for it and at the same time laugh because he put in a lot of effort and could of gone just a little farther for a better outcome. However I'd high five him for all the work because hes way farther ahead than I am and did it his way. __________________ Its not pretty but its mine to figure out. The build / The Photos / Build Diary

01-03-2009, 04:38 PM	#7
66truckin Registered User Join Date: Jan 2009 Location: Springfield, IL Posts: 185	Re: '64 C10 partial resto write-up yes I commend him for trying but if he ever sells it the next guy is going to be in for some surprises.

01-03-2009, 07:49 PM	#8
MXmaniac Registered User Join Date: Jan 2007 Location: Denton, Texas Posts: 356	Re: '64 C10 partial resto write-up haha I guess I didn't remember it very well. I read it all a few years ago and didn't remember it being that rough! __________________ Andrew '69 C-20(292, 4-speed) Retired Daily Driver '64 C-10(250, 3-speed) Fixerupper '97 F*rd Mustang GT(4.6L, 5-speed) Daily Driver If I only wanted two pedals I'd have bought a bicycle.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.