350/400 SB heads needed near PA - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67ChevyC10Stepside · 04-28-2004, 12:55 AM

i have a 350 short block and a 400 short block...i have one set of heads....i need another.....needs to be close to me cause shipping would probably suck. let me know what you got

67ChevyC10Stepside · 04-28-2004, 03:37 PM

ttt

67ChevyC10Stepside · 04-28-2004, 10:53 PM

ttt

**ScottH** · 04-28-2004, 11:21 PM

What r u looking for in the heads? Redone or used, 64 vs 76 cc, small valve vs large, etc. Let me know and I'll see what I have.

Thanks.

Scott

67ChevyC10Stepside · 04-28-2004, 11:46 PM

anything you got....if i buy high performers they will go on my 400 if i buy plain janes they will go on the 350 let me know what you got

67ChevyC10Stepside · 04-29-2004, 12:29 AM

ttt

67ChevyC10Stepside · 04-29-2004, 12:36 PM

ttt

67ChevyC10Stepside · 04-29-2004, 12:36 PM

you still there? im plannin on making a trip to NJ so if you have them that would be great!

67ChevyC10Stepside · 04-29-2004, 02:18 PM

68 hits and one person has heads? hmm

Fast67velle · 04-29-2004, 07:43 PM

I might have a set of 400 heads somewhere. I have to look through all of these! They are bone stock with the steam holes! I'll get back to you. PM ME

67ChevyC10Stepside · 04-29-2004, 08:33 PM

any of those 64cc? i would kinda like high CR

racewithem · 04-29-2004, 08:56 PM

Actually shipping is not to bad for a set of heads. It's like 40$'s or something. Only problem is you can't see the heads until you paid for them and recieved them and if you don't like them you are stuck. I have made out on a few deals and lost on a few more. A 400 head is only a 350 head that has ben drilled. You can do this yourself. Just put the 400 gasket on the 350 head and drill where the steam hole in the gasket is. Most times it is cheaper to buy a new set than to buy and recondition an old set. At least then they are new and you know they are good. Since you seem to be in a hurry here is a few sites to look for heads on.

For new

http://www.gmpartsdepot.com/store/ca...Category_ID=65 A new set of Vortecs complete with valves and springs about $500.

http://www.sdpc2000.com/cart.asp?act...tart&catid=277

For Used
https://www.redneckjunk.com/Classifi...Classified.asp

http://www.mortec.com/

http://www.racecarauctions.com/

http://www.aarn.com/

http://oval.race-cars.com/

http://www.rpmstreet.com/cgi-bin/cla...lassifieds.cgi

http://www.raceindustry.com/

http://www.jrmotorsports.net/

http://www.autopartx.com/

http://www.nepitstop.com/index.jsp

I probably have more somewhere but this should keep you busy for a few minutes.

67ChevyC10Stepside · 04-29-2004, 09:52 PM

i just want an old set of 64cc i think 434 casting heads

67ChevyC10Stepside · 04-29-2004, 10:02 PM

ttt

67ChevyC10Stepside · 04-29-2004, 10:50 PM

you dont have to be mean about it and you dont need the attitude....i dont know much about them and im not sure what to look for....i know i want 64cc the one with the 202 intake valve......that's all i know oh and i think they are called 434s

Ont67shortbox · 04-30-2004, 12:19 AM

I have a set of 400 small block heads casting number is 3973493, you can have them for $200.00 i am in Ontario halfway between Detroit and Toronto

67ChevyC10Stepside · 04-30-2004, 01:10 AM

what kinda shape they in? any pics?

Ont67shortbox · 04-30-2004, 09:17 AM

I don't have a digital camera,they are off of a 400 with approx 5000 miles on it,I also have a set of Sportsman 2's fully ported,for $800.00 a set of angle plug *492* cast for $500 unassembled, and a nice Offy dual 4 bbl setup with twin Carter 500cfm carbs and edelbrock air cleaners, new for $800.00,come have a look if you want and we can work out a deal, i need room in my garage lol, Brian

67ChevyC10Stepside · 04-30-2004, 01:28 PM

you live a little far away for me to "come take a look" lol.......

67ChevyC10Stepside · 04-30-2004, 04:31 PM

ttt

Ont67shortbox · 04-30-2004, 04:40 PM

Yeah i guess its about 6 hrs,not sure where Butler Pa is.but i am 2 hrs from Detroit, and 2 1/2 hrs from Buffalo,

67ChevyC10Stepside · 05-01-2004, 12:26 AM

ttt

67ChevyC10Stepside · 05-02-2004, 01:22 PM

ttt

04-28-2004, 12:55 AM	#1
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	350/400 SB heads needed near PA i have a 350 short block and a 400 short block...i have one set of heads....i need another.....needs to be close to me cause shipping would probably suck. let me know what you got __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

04-28-2004, 03:37 PM	#2
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	ttt __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

04-28-2004, 10:53 PM	#3
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	ttt __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

04-28-2004, 11:46 PM	#5
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	anything you got....if i buy high performers they will go on my 400 if i buy plain janes they will go on the 350 let me know what you got __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

04-29-2004, 12:29 AM	#6
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	ttt __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

04-28-2004, 11:21 PM	#4
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	What r u looking for in the heads? Redone or used, 64 vs 76 cc, small valve vs large, etc. Let me know and I'll see what I have. Thanks. Scott

04-29-2004, 12:36 PM	#7
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	ttt __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

04-29-2004, 02:18 PM	#9
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	68 hits and one person has heads? hmm __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

04-29-2004, 07:43 PM	#10
Fast67velle Registered User Join Date: Apr 2004 Location: Williamstown NJ Posts: 56	I might have a set of 400 heads somewhere. I have to look through all of these! They are bone stock with the steam holes! I'll get back to you. PM ME __________________ WANTED: 55-75 Muscle Cars, Classics, and Parts in any condition http://www.freewebs.com/fast67vellen2o/index.htm 67 Chevelle, sbc, 4 gear, bottle, how fast can it be?

04-29-2004, 08:33 PM	#11
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	any of those 64cc? i would kinda like high CR __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

04-29-2004, 08:56 PM	#12
racewithem Registered User Join Date: Feb 2004 Location: South Jersey Posts: 45	Actually shipping is not to bad for a set of heads. It's like 40$'s or something. Only problem is you can't see the heads until you paid for them and recieved them and if you don't like them you are stuck. I have made out on a few deals and lost on a few more. A 400 head is only a 350 head that has ben drilled. You can do this yourself. Just put the 400 gasket on the 350 head and drill where the steam hole in the gasket is. Most times it is cheaper to buy a new set than to buy and recondition an old set. At least then they are new and you know they are good. Since you seem to be in a hurry here is a few sites to look for heads on. For new http://www.gmpartsdepot.com/store/ca...Category_ID=65 A new set of Vortecs complete with valves and springs about $500. http://www.sdpc2000.com/cart.asp?act...tart&catid=277 For Used https://www.redneckjunk.com/Classifi...Classified.asp http://www.mortec.com/ http://www.racecarauctions.com/ http://www.aarn.com/ http://oval.race-cars.com/ http://www.rpmstreet.com/cgi-bin/cla...lassifieds.cgi http://www.raceindustry.com/ http://www.jrmotorsports.net/ http://www.autopartx.com/ http://www.nepitstop.com/index.jsp I probably have more somewhere but this should keep you busy for a few minutes. __________________ 2004 GMC HD2500 Extended Cab 4X4 1973 Blazer 4X4 400ci.auto On a quite night you can hear the rust fall off it. Anyone have a body? 1989 C-20 1972 C-10 Streetstock Racetruck 355c.i. Go Fast,Turn Left 5 lug disk brake 69 frame waiting for a 67 body

04-29-2004, 09:52 PM	#13
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	i just want an old set of 64cc i think 434 casting heads __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

04-29-2004, 10:02 PM	#14
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	ttt __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

04-29-2004, 10:50 PM	#15
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	you dont have to be mean about it and you dont need the attitude....i dont know much about them and im not sure what to look for....i know i want 64cc the one with the 202 intake valve......that's all i know oh and i think they are called 434s __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

04-30-2004, 12:19 AM	#16
Ont67shortbox Registered User Join Date: May 2003 Location: Ontario Posts: 279	I have a set of 400 small block heads casting number is 3973493, you can have them for $200.00 i am in Ontario halfway between Detroit and Toronto



Register or Log In To remove these advertisements.

04-30-2004, 01:10 AM	#17
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	what kinda shape they in? any pics? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

04-30-2004, 09:17 AM	#18
Ont67shortbox Registered User Join Date: May 2003 Location: Ontario Posts: 279	I don't have a digital camera,they are off of a 400 with approx 5000 miles on it,I also have a set of Sportsman 2's fully ported,for $800.00 a set of angle plug 492 cast for $500 unassembled, and a nice Offy dual 4 bbl setup with twin Carter 500cfm carbs and edelbrock air cleaners, new for $800.00,come have a look if you want and we can work out a deal, i need room in my garage lol, Brian

04-30-2004, 01:28 PM	#19
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	you live a little far away for me to "come take a look" lol....... __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

04-30-2004, 04:31 PM	#20
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	ttt __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

04-30-2004, 04:40 PM	#21
Ont67shortbox Registered User Join Date: May 2003 Location: Ontario Posts: 279	Yeah i guess its about 6 hrs,not sure where Butler Pa is.but i am 2 hrs from Detroit, and 2 1/2 hrs from Buffalo,

05-01-2004, 12:26 AM	#22
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	ttt __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

05-02-2004, 01:22 PM	#23
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	ttt __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

Register or Log In To remove these advertisements.