MN Hood, fenders, door, grill, tailgates, seat, manual throttle, etc. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hgs_notes · 05-23-2013, 08:19 AM

I need to clear out a bunch of parts. I don't want to ship the body sheetmetal, but could maybe work out delivery for that. I will be making a road trip to the St Louis area in a couple weeks and if a buyer is between south central MN and there I could bring it with. Or in MN I travel a lot for work and could meet up with a buyer that way.

I will post more pics after work and adding more items to sell. Also selling a 2wd blazer chassis and blazer roll bar on the blazer parts board.

Bedside skin, passenger side, $75
Hood is a 69-72 that is in good condition. $50
Pair of 68 chevy or 68-72 GMC fenders. Driver side rust free, pass side has a few pinholes in the front bottom. $75 for drivers side, $50 for passenger side. Sold
One passenger side door, pretty solid but who knows whats under the paint. $50
67-68 chevy grill, nice shape, surface rust on the back side only. No trim, but includes rock guard. $100sold
Red Chevy tailgate, no rust, no bow, but there is a dent or 2. $150 Sold
Green chevy tailgate, just surface rust where paint peeled off, straight. $200 Sold
67 OEM bench seat, needs recovered but foam is good. The back folds forward. $75
Most of a manual throttle set up. Have the gas pedal and throttle cable only. It will need a locking collar for the end of the cable and a knob, and "throttle" emblem for the gage cluster. $35 shipped. Sold
Flowmaster 40 mufflers, part# 42543, 2.5" offset in and out, used, maybe 1000 miles on them. $75 for the pair plus shipping.Sold

Door. Looks pretty solid. The rusty area across the lower skin is where a strip of rubber molding was glued on to the paint and I pulled off. Looks like surface rust, but may have some pitting show if its sand blasted. Bottom looks pretty solid.

I also have this passenger side section of a bed side skin. I got it as a possible patch for my jimmy but I was able to straighten it so didn't need this. From a long bed, but can be used for a short bed section also, same as guys do when they shorten a long bed. There was a crack on the bottom, should weld up easy enough. $75

GobbleStalker · 05-23-2013, 08:42 AM

Interested in the green tailgate but need to get to 13601 Watertown.

hgs_notes · 05-23-2013, 04:09 PM

I can check shipping Tonight but it will be pretty high.
Posted via Mobile Device

Number98 · 05-23-2013, 04:32 PM

Can you check shipping to 30281 on the red gate?

**w314speed** · 05-23-2013, 08:28 PM

shipping to 30127 on green gate? Greyhound to Marietta, GA terminal!

ckexswb · 05-23-2013, 08:40 PM

I'll take both tailgates if i can pick them up in St Louis!

**69 MOD** · 05-23-2013, 09:02 PM

I will take the green gate $$cash$$ and I'm near Forest Lake....

hgs_notes · 05-23-2013, 11:10 PM

Quote:

Originally Posted by GobbleStalker

Interested in the green tailgate but need to get to 13601 Watertown.

Total with shipping is $275

Quote:

Originally Posted by Number98

Can you check shipping to 30281 on the red gate?

Total would be $225 shipped.

Quote:

Originally Posted by w314speed

shipping to 30127 on green gate? Greyhound to Marietta, GA terminal!

The greyhound shipping site is currently down, but from my past experience I'm guessing it would be about $80-90 for shipping. UPS is probably cheaper and easier for me, and will be $75.

Quote:

Originally Posted by ckexswb

I'll take both tailgates if i can pick them up in St Louis!

If the other inquiries above you pass that will work for me.

Quote:

Originally Posted by 69 MOD

I will take the green gate $$cash$$ and I'm near Forest Lake....

If it gets to you I can get it up there in the second half of June, when I get back from IL.

jessewebb · 05-23-2013, 09:03 PM

Interested in the mufflers, PM sent

hgs_notes · 05-23-2013, 11:18 PM

Quote:

Originally Posted by jessewebb

Interested in the mufflers, PM sent

Total would be $100 shipped.

junkyard · 05-24-2013, 01:06 AM

I would be interested in the 68 chevy grill and filler if you decide to ship.
Thanks
Ken

hgs_notes · 05-24-2013, 11:10 PM

Quote:

Originally Posted by junkyard

I would be interested in the 68 chevy grill and filler if you decide to ship.
Thanks
Ken

Shipping is a minimum of $90 because of the size. Still interested?

athleo · 05-25-2013, 12:34 AM

I'll take the manual throttle set up shipped to 78552! Please pm paypal.....thanks....dwt.
Posted via Mobile Device

junkyard · 05-25-2013, 03:13 AM

Quote:

Originally Posted by hgs_notes

Shipping is a minimum of $90 because of the size. Still interested?

Hi,
Was hoping for 150 range shipped.
Do you ship greyhound?
Thanks

hgs_notes · 05-25-2013, 08:03 AM

ckexswb, no response from the guys ahead of you and you had the first "I'll take it" on the gates, so they are yours if you still want them.

ckexswb · 05-25-2013, 08:32 AM

Quote:

Originally Posted by hgs_notes

ckexswb, no response from the guys ahead of you and you had the first "I'll take it" on the gates, so they are yours if you still want them.

GREAT... I'll PM you for details. THANKS

athleo · 05-25-2013, 06:17 PM

Paypal sent for throttle.......thanks........dwt.
Posted via Mobile Device

hahjoel · 05-25-2013, 06:26 PM

Im looking for a set of fenders. Do you have anything left? price?

hgs_notes · 05-25-2013, 07:14 PM

Quote:

Originally Posted by hahjoel

Im looking for a set of fenders. Do you have anything left? price?

I have both sides available yet. $125 for the pair.

hahjoel · 05-25-2013, 07:15 PM

where are you located? they are both in fair condition. I saw the discription

hgs_notes · 05-25-2013, 10:43 PM

Quote:

Originally Posted by hahjoel

where are you located? they are both in fair condition. I saw the discription

PM sent. I'm in Sleepy Eye, south central MN.

jessewebb · 06-03-2013, 07:38 PM

Mufflers made it today, Thanks Pete

hgs_notes · 06-26-2013, 01:30 PM

Still have the grill, door, hood and bedside skin for sale.

05-23-2013, 08:19 AM	#1
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,125	Hood, fenders, door, grill, tailgates, seat, manual throttle, etc. I need to clear out a bunch of parts. I don't want to ship the body sheetmetal, but could maybe work out delivery for that. I will be making a road trip to the St Louis area in a couple weeks and if a buyer is between south central MN and there I could bring it with. Or in MN I travel a lot for work and could meet up with a buyer that way. I will post more pics after work and adding more items to sell. Also selling a 2wd blazer chassis and blazer roll bar on the blazer parts board. Bedside skin, passenger side, $75 Hood is a 69-72 that is in good condition. $50 Pair of 68 chevy or 68-72 GMC fenders. Driver side rust free, pass side has a few pinholes in the front bottom. $75 for drivers side, $50 for passenger side. Sold One passenger side door, pretty solid but who knows whats under the paint. $50 67-68 chevy grill, nice shape, surface rust on the back side only. No trim, but includes rock guard. $100sold Red Chevy tailgate, no rust, no bow, but there is a dent or 2. $150 Sold Green chevy tailgate, just surface rust where paint peeled off, straight. $200 Sold 67 OEM bench seat, needs recovered but foam is good. The back folds forward. $75 Most of a manual throttle set up. Have the gas pedal and throttle cable only. It will need a locking collar for the end of the cable and a knob, and "throttle" emblem for the gage cluster. $35 shipped. Sold Flowmaster 40 mufflers, part# 42543, 2.5" offset in and out, used, maybe 1000 miles on them. $75 for the pair plus shipping.Sold Door. Looks pretty solid. The rusty area across the lower skin is where a strip of rubber molding was glued on to the paint and I pulled off. Looks like surface rust, but may have some pitting show if its sand blasted. Bottom looks pretty solid. I also have this passenger side section of a bed side skin. I got it as a possible patch for my jimmy but I was able to straighten it so didn't need this. From a long bed, but can be used for a short bed section also, same as guys do when they shorten a long bed. There was a crack on the bottom, should weld up easy enough. $75 __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff Last edited by hgs_notes; 07-07-2013 at 02:15 PM.

05-23-2013, 08:42 AM	#2
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: Hood, fenders, door, grill, tailgates, seat, manual throttle, etc. Interested in the green tailgate but need to get to 13601 Watertown. __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

05-23-2013, 04:09 PM	#3
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,125	Re: Hood, fenders, door, grill, tailgates, seat, manual throttle, etc. I can check shipping Tonight but it will be pretty high. Posted via Mobile Device __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

05-23-2013, 04:32 PM	#4
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,553	Re: Hood, fenders, door, grill, tailgates, seat, manual throttle, etc. Can you check shipping to 30281 on the red gate?

05-23-2013, 08:28 PM	#5
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,314	Re: Hood, fenders, door, grill, tailgates, seat, manual throttle, etc. shipping to 30127 on green gate? Greyhound to Marietta, GA terminal!

05-23-2013, 08:40 PM	#6
ckexswb 67-72=-5 Join Date: Jun 2007 Location: calif/ beach Posts: 807	Re: Hood, fenders, door, grill, tailgates, seat, manual throttle, etc. I'll take both tailgates if i can pick them up in St Louis! __________________ 1972 Cheyenne super swb 4x4 "QUEEN" 1996 Dodge ram diesel.... 4x4 "HORSE"

05-23-2013, 09:02 PM	#7
69 MOD Senior Member Join Date: May 2013 Location: Lino Lakes, MN Posts: 362	Re: Hood, fenders, door, grill, tailgates, seat, manual throttle, etc. I will take the green gate $$cash$$ and I'm near Forest Lake.... __________________ Chad '71 GMC 2500 Custom Ol Blue '72 Custom Deluxe Highlander Stuffed Olive '73 Trans Am '13 Silverado 2500 Duramax Storm Trooper

05-23-2013, 09:03 PM	#9
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: Hood, fenders, door, grill, tailgates, seat, manual throttle, etc. Interested in the mufflers, PM sent __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

05-24-2013, 01:06 AM	#11
junkyard Registered User Join Date: Jul 2012 Location: OAKDALE, CALIFORNIA Posts: 166	Re: Hood, fenders, door, grill, tailgates, seat, manual throttle, etc. I would be interested in the 68 chevy grill and filler if you decide to ship. Thanks Ken

05-25-2013, 12:34 AM	#13
athleo Registered User Join Date: Jul 2011 Location: Harlingen, Texas Posts: 145	Re: Hood, fenders, door, grill, tailgates, seat, manual throttle, etc. I'll take the manual throttle set up shipped to 78552! Please pm paypal.....thanks....dwt. Posted via Mobile Device __________________ 1968 K20 custom panel truck! 1971 K20 custom truck! 1990 K3500 2007 K2500 Silverado HD!

05-25-2013, 08:03 AM	#15
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,125	Re: Hood, fenders, door, grill, tailgates, seat, manual throttle, etc. ckexswb, no response from the guys ahead of you and you had the first "I'll take it" on the gates, so they are yours if you still want them. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

05-25-2013, 06:17 PM	#17
athleo Registered User Join Date: Jul 2011 Location: Harlingen, Texas Posts: 145	Re: Hood, fenders, door, grill, tailgates, seat, manual throttle, etc. Paypal sent for throttle.......thanks........dwt. Posted via Mobile Device __________________ 1968 K20 custom panel truck! 1971 K20 custom truck! 1990 K3500 2007 K2500 Silverado HD!

05-25-2013, 06:26 PM	#18
hahjoel Registered User Join Date: Dec 2011 Location: fargo, nd Posts: 64	Re: Hood, fenders, door, grill, tailgates, seat, manual throttle, etc. Im looking for a set of fenders. Do you have anything left? price? __________________ 69 GMC Long Bed http://67-72chevytrucks.com/vboard/s...d.php?t=500284

05-25-2013, 07:15 PM	#20
hahjoel Registered User Join Date: Dec 2011 Location: fargo, nd Posts: 64	Re: Hood, fenders, door, grill, tailgates, seat, manual throttle, etc. where are you located? they are both in fair condition. I saw the discription __________________ 69 GMC Long Bed http://67-72chevytrucks.com/vboard/s...d.php?t=500284

06-03-2013, 07:38 PM	#22
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: Hood, fenders, door, grill, tailgates, seat, manual throttle, etc. Mufflers made it today, Thanks Pete __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride



Register or Log In To remove these advertisements.

06-26-2013, 01:30 PM	#23
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,125	Re: Hood, fenders, door, grill, tailgates, seat, manual throttle, etc. Still have the grill, door, hood and bedside skin for sale. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

Register or Log In To remove these advertisements.