![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Long Fleet Club
Join Date: Aug 2006
Location: Deer Park, TX
Posts: 5,666
|
My realy low cost '72 truck build pictures.
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
__________________
Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules |
![]() |
![]() |
![]() |
#2 |
Long Fleet Club
Join Date: Aug 2006
Location: Deer Park, TX
Posts: 5,666
|
Re: My realy low cost '72 truck build pictures.
![]() This was a practice model. I bought 2 and haven't built any in years.
__________________
Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules |
![]() |
![]() |
![]() |
#3 |
K5Camper
![]() Join Date: Mar 2004
Location: Pueblo, CO
Posts: 1,513
|
Re: My realy low cost '72 truck build pictures.
Nice job. Here's a tip to really make the detail on the body pop. Bare Metal foil. Get some. Most decent hobby shops have it. The stuff has a stick backside, cut to fit and press it on and smooth it out. If you do it right it looks like chrome, stainless or gold (depending on which sheet you buy).
Here's a couple of examples. The 62 Bubble top has the window mouldings done with BMF. While both Nomads in the next pic have the fender trim done. Get a practice body and try it on there first. It takes a little practice and a VERY sharp blade on your xacto knife.
__________________
Rob Z. 1975 K5 350/465/205/D44/12b 4" lift on 35's- RIP 1991 K5 8.1L/NV4500/241/D44/14b FWC Camper |
![]() |
![]() |
![]() |
Bookmarks |
|
|